Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Concepts for sediment restoration on the palos verdes shelf,California

This article summarizes a study conducted by the U.S. Army Engineer Waterways Experiment Station to develop technical information and to evaluate the engineering feasibility of restoration alternatives for DDT-and PCB-contaminated sediments on the Palos Verdes shelf and slope near Los Angeles, California. The study evaluated the nonremoval alternative of in-place capping of contaminated sediments on the shelf and slope; removal of contaminated sediments using conventional and specialized dredging equipment and deep ocean mining equipment; treatment of contaminated sediments; and disposal of contaminated sediments in confined (diked) disposal facilities (CDFs), contained aquatic disposal (CAD) sites, upland landfills, and deep ocean basin sites. Cost estimates of the various alternatives were also prepared. This article concludes that restoration of the contaminated sediments is technically feasible. Sediments on the shelf and slope can be removed using available dredging technologies for deep water environments. In-place capping, CAD, and CDF alternatives are technically feasible. The deep ocean basin disposal alternative is not feasible from the technical or regulatory standpoint. The treatment alternative is not feasible from the implementability and economic standpoint.     

Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.     

Focusing biodiversity research on the needs of decision makers

The project on Biodiversity Uncertainties and Research Needs (BURN) ensures the advancement of usable knowledge on biodiversity by obtaining input from decision makers on their priority information needs about biodiversity and then using this input to engage leading scientists in designing policy-relevant research. Decision makers articulated concerns related to four issues: significance of biodiversity; status and trends of biodiversity; management for biodiversity; and the linkage of social, cultural, economic, legal, and biological objectives. Leading natural and social scientists then identified the research required to address the decision makers' needs and determined the probability of success. The diverse group of experts reached consensus on several fundamental issues, helping to clarify the role of biodiversity in land and resource management. The BURN participants identified several features that should be incorporated into policy-relevant research plans and management strategies for biodiversity. Research and assessment efforts should be: multidisciplinary and integrative, participatory with stakeholder involvement, hierarchical (multiple scales), and problem- and region-specific. The activities should be focused regionally within a global perspective. Meta-analysis of existing data is needed on all fronts to assess the state of the science. More specifically, the scientists recommended six priority research areas that should be pursued to address the information needs articulated by decision makers: (1) characterization of biodiversity, (2) environmental valuation, (3) management for sustainability—for humans and the environment (adaptive management), (4) information management strategies, (5) governance and stewardship issues, and (6) communication and outreach. Broad recommendations were developed for each research area to provide direction for research planning and resource management strategies. The results will directly benefit those groups that require biodiversity research to address their needs—whether to develop policy, manage natural resources, or make other decisions affecting biodiversity.     

Pressures,trends, and impacts in coastal zones: Interactions between socioeconomic and natural systems

This paper assesses the status of coastal zones in the context of expected climate change and its related impacts, as well as current and future socioeconomic pressures and impacts. It is argued that external stresses and shocks relating to sea-level rise and other changes will tend to exacerbate existing environmental pressures and damage in coastal zones. Coastal zones are under increasing stress because of an interrelated set of planning failures including information, economic market, and policy intervention failures. Moves towards integrated coastal zone management are urgently required to guide the coevolution of natural and human systems. Overtly technocentric claims that assessments of vulnerability undertaken to date are overestimates of likely future damages from global warming are premature. While it is the case that forecasts of sea-level rise have been scaled down, much uncertainty remains over, for example, combined storm, sea surge, and other events. In any case, within the socioeconomic analyses of the problem, resource valuations have been at best only partial and have failed to incorporate sensitivity analysis in terms of the discount rates utilized. This would indicate an underestimation of potential damage costs. Overall, a precautionary approach is justified based on the need to act ahead of adequate information acquisition, economically efficient resource pricing and proactive coastal planning.     

The role of corporations in ensuring biodiversity

Corporations own approximately 25% of all private land in the United States and, therefore, play an essential role in protecting biodiversity and maintaining natural habitats. The Wildlife Habitat Council (WHC) is a unique joint venture between conservation organizations and corporations to utilize corporate lands for ensuring biodiversity. The following case studies demonstrate how corporations have helped ensure healthy ecosystems and provided critical leadership in regional efforts. Amoco Chemical Company's Cooper River Plant has been instrumental in developing a cooperative project that involves numerous corporations, plantation owners, private citizens, nonprofit organizations, government agencies, and community groups to develop a comprehensive, ecosystem-based management plan for part of the Cooper River in Charleston, South Carolina, USA. The second case focuses on the Morie Company, a national sand quarry operator headquartered in southern New Jersey, USA. Morie Company is working with WHC, community groups, the Pinelands Commission, and other state regulatory agencies to explore sustainable development opportunities for companies within the Pinelands regulations. The third case takes us to DuPont Company's Asturias, Spain, site. A win—win success story of improved habitat and cost savings is the result of DuPont's concern for the environment, ability to work with a variety of groups, and willingness to consider innovative restoration techniques. The fourth case discusses Consumers Power Company's Campbell Plant in West Olive, Michigan, USA. In addition to implementing projects that contribute to biodiversity, Consumers Power has developed an environmental education field station to teach others about the importance of natural habitats. The final case highlights Baltimore Gas & Electric Company's efforts to maintain habitat for endangered species at their Calvert Cliffs site in Maryland.     

A design for environment methodology for evaluating materials

Industrial ecology is a new multidisciplinary field of study requiring that economic activity be integrated with, and have minimal impact on, surrounding natural systems. This systems-based approach is beginning to be implemented in private firms through the development of Design for Environment (DFE) methodologies and tools which support the integration of technological and environmental considerations in all economic activities. As part of this development process, a matrix system is proposed by the author by which the environmental and energy costs embedded in materials as used in generic applications may be identified, facilitating environmentally and economically efficient selection of materials. This Material Environmental Evaluation Matrix is supported by checklists which inform the evaluation process. A set of completed matrices for major materials in common applications forms the basis for an Environmentally Efficient Materials Database (EEMD). Once completed, the EEMD would inform consumers, product and process designers, business planners and managers, regulators and government purchasers, public interest groups, and others in their choice of optimal, environmentally and economically efficient, material options.     

The value of “EHS auditing” in the United States: Making sense out of the current chaos

Conventional wisdom has advocated environmental auditing as a prudent part of an internal control program and one of the key tools in driving proactive efforts. As a part of risk management activities, it is often employed to protect an organization, its employees, and officers from liability. Conscientious use of such audits has undoubtedly protected human health and the environment. Ironically, those who make the most consistent efforts to audit compliance and management systems, according to advocates of audit protection, may be the most vulnerable to enforcement actions and lawsuits. This article places the escalating calls for audit protection in a proper context.     

SIMULATION OF TEMPORAL CHANGES IN RAINFALL-RUNOFF CHARACTERISTICS,COON CREEK BASIN,WISCONSIN1

ABSTRACT: Streamflow for 67 years was simulated for Coon Creek at Coon Valley, Wisconsin, for three conditions in the drainage basin: (1) conditions in the 1930s; (2) conditions in the 1970s, excluding flood-detention reservoirs; and (3) conditions in the 1970s, including flood-detention reservoirs. These simulations showed that the changes in agricultural practices over 40 years (1940–80) reduced the 100-year flood by 53 percent (from 38,900 to 18,300 cubic feet per second). The flood-detention reservoirs reduced the 100-year flood by an additional 17 percent (to 15,100 cubic feet per second). The simulation was accomplished by calibrating a precipitation-runoff model to observed rainfall and runoff during two separate periods (1934–40 and 1978–81). Comparisons of model simulations showed that differences between the model calibrations for the two periods were statistically significant at the 95 percent confidence level.     

PESTICIDES IN GROUND WATER: DO ATRAZINE METABOLITES MATTER?1

ABSTRACT: Atrazine and atrazine-residue (atrazine + two metabolites - deethylatrazine and deisopropylatrazine) concentrations were examined to determine if consideration of these atrazine metabolites substantially adds to our understanding of the distribution of this pesticide in groundwater of the midcontinental United States. The mean of atrazine.residue concentrations was 53 percent greater than that of atrazine alone for those observations above the detection limit (> 0.05 μg/l). Furthermore, a censored regression analysis using atrazine-residue concentrations revealed significant factors not identified when only atrazine concentrations were used. Thus, knowledge of concentrations of these atrazine metabolites is required to obtain a true estimation of risk of using these aquifers as sources for drinking water, and such knowledge also provides information that ultimately may be important for future management policies designed to reduce atrazine concentrations in ground water.