Strategic Environmental Assessment of the Effects of European Union's Regional Development Plans in Doñana National Park (Spain)

The European Union's Structural Funds are implemented by means of Regional Development Plans (RDP), whose regionally scoped environmental assessment is required. We highlight the deficiencies faced by this approach when subregional areas with high conservation natural values are involved and illustrate it with the case of the RDP of Andalusia region on Doñana National Park area (Spain). Commissioned by the World Wildlife Fund, a Strategic Environmental Assessment (SEA) of the Andalusian RDP was carried out focusing on Doñana and its area of influence. This is a complex space where some of the most environmentally valuable features in the continent coexist with a surrounding intense and multi-sector economic activity, threatening its conservation. In the absence of an established sustainability framework in the Region, a “trickle-down” SEA approach evidenced the need to produce a set of environmental, economic and social guidelines for sustainable management of land, against which the RDP objectives were tested for coherence. An “incremental” SEA approach was also tested, which involved the identification of 79 measures and actions stemming from the RDP provisions and other concurrent planning documents reviewed and the qualitative assessment of their individual and cumulative potential impacts on Doñana environments. In the light of the results, a set of complementary mitigating measures was proposed for inclusion in tiered stages of the planning process. Measures to avoid, reduce, remedy and monitor the major types of impact were proposed, including provisions for public participation. SEA emerges as an instrument for non-governmental organizations (NGOs) to carry out independent assessment of public development initiatives.     

Energy consumption analysis of ABS plastic parts injected in a hybrid injection moulding machine

The energy analysis of injection moulding processes is influenced by complex interactions amongst the moulded part, its material, the injection machine, the process parameters and the environmental conditions. The availability of energy usage analyses that comprehend information on specific materials and machine kind is limited. This paper reports a study that estimates and analyses the power usage profile (PUP), the specific energy consumption (SEC), and the energy distribution at an operation level of two different injected parts made of acrylonitrile-butadiene-styrene and produced in a hybrid injection moulding machine. The methodology followed by the authors incorporates an experiment carried out in an industrial facility. A large sample size, and data-acquisition and data post-processing processes to obtain an accurate PUP and SEC are used. A breakdown of the energy consumed by the injection moulding process of the parts studied at an operation level using Sankey diagrams is discussed. The study results are used to identify strategies to reduce the energy consumed by the processes. The methodology employed, and the strategies reported could be used with other plastic parts regardless of the material and machine used. The results reported are new experimental data useful input for theoretical models.     

Factors affecting the quantitative uncertainty of the estimated short-term intake. Part II—Practical examples

ABSTRACT

The effects of the spread of residue concentrations in the samples derived from the selected supervised trials and the number of trials were studied on the magnitude and uncertainty of the short-term dietary intakes calculated with the proposed new procedure (IESTI_p) and that one used currently by the FAO (Food and Agriculture Organization) and WHO (World Health Organization) Joint meeting on Pesticide Residues (JMPR) (IESTI_c). The residue data of 10 pesticides were obtained from supervised trials conducted on apples and pears. The methods described in Part I were used for the calculations of the uncertainty. The results indicate that the ratio of IESTI_P to IESTI_c (φ_IESTI) is directly proportional to the ratio of the estimated maximum residue level (MRL), recommended by the JMPR; to the highest residue (HR) observed in supervised trials, and it may have a wide range depending on the particular conditions. The φ_IESTI becomes greater with the increase of the difference between the mrl or maximum residue limit (MRL, established by the Codex Alimentarius Commission, CAC) and HR, and becomes smaller if the difference between the large portion (LP) and unit mass (U) decreases. The φ_IESTI ranged between 2 and 5.1 in the 16 cases examined indicating that the IESTI_p calculation method leads to higher intake estimates. The ratio of CV_IESTIp and CV_IESTIc ranged typically between 0.62 and 1.71. It rapidly increased up to 12 trials. For a larger number of trials, the ratio remained practically constant (1.69–1.71). The processing factor (PF) equally affects the MRL and HR values, therefore, it will not practically influence the φ_IESTI. The uncertainty of the estimated median residues depends on the spread and number of values in the residue datasets, which affects the uncertainty of the conversion factor (CF) and subsequently the uncertainty of the estimated IESTI_p. Residue values obtained from minimum nine independent trials are required for the correct calculation of the 95% confidence intervals of the calculated median residues. The uncertainty of the analytical results directly affects the median, HR values and indirectly the calculated mrl and the MRL derived from it. Therefore, it should also be considered for the calculation of the combined uncertainty of the conversion factors. For the correct interpretation of the results of dietary exposure calculations, the upper 95% confidence limit of the short-term intake should also be considered. However, it is not the current practice of regulatory agencies or JMPR.     

Oxidative damage to Pseudomonas aeruginosa ATCC 27833 and Staphylococcus aureus ATCC 24213 induced by CuO-NPs

Environmental Science and Pollution Research - The cytotoxicity of nanoparticles (NPs) and their properties are important issues in nanotechnology research. Particularly, NPs affect the metabolism...     

Comparison of the energetic performance of a binary cycle and a flash evaporation binary cycle,using low-enthalpy geothermal energy

In this article, the comparison of the energetic performance of a binary cycle and a modified binary cycle with flash evaporation is presented, both using a low-enthalpy geothermal resource. The comparative analysis is based on two main discourses: the first one evaluates a conventional binary cycle (CBC) with isopentane as working fluid in order to validate and compare the generated data with those reported in similar studies; the second one uses the same input parameters for both cycles, obtaining the cases in which the modified binary cycle is the most viable choice to use. In addition to the above, several aspects are considered when selecting the most suitable working fluid, and the use of water as working fluid is introduced. When the temperature of the geothermal resource is below 140 °C, and the ambient temperature is 25 °C, the flash evaporation binary cycle, using water as working fluid, shows an improved performance compared to a CBC, with a theoretical output over 1000 kWe. This may encourage new areas of opportunity for power generation, not only with low- and medium-enthalpy geothermal energy, but also with other renewable energy sources such as solar.     

CH4 continuous measurements in the upper Spanish plateau

Continuous methane, CH₄, concentrations were measured in a rural area of the upper Spanish plateau from June 2010 to May 2012 by cavity ring-down spectroscopy technique. The results obtained have proven the local impact of anthropogenic nearby sources on CH₄ concentrations, and evidence a significant influence on the overall mean, averaged daily and seasonal patterns recorded at the measuring site. The positive anomalies in CH₄ concentrations, statistically significant at 95 %, in the southeast sector, defined here as ESE, SE, SSE and S sectors, have been attributed to the contribution of the Valladolid urban plume and the urban landfill. Based on this finding, CH₄ background levels were associated to the concentrations recorded in the remaining un-disturbed sectors. CH₄ means of the overall data set, the southeast sector and background sectors yielded average means of 1,894.1, 1,927.9 and 1,887.1 ppb, respectively. The diurnal and seasonal patterns of the overall data set and background concentrations have shown that CH₄ concentrations are mainly dominated by its reaction with OH radicals. Maximum hourly concentrations were reached during night-time and early morning, 5–7 h, whereas minimum concentrations were recorded at 16 h. Maximum and minimum monthly means were recorded in January and July, respectively. The diurnal and seasonal amplitudes, namely, peak-to-peak means, of background concentrations were 25.1 and 48.1 ppb, respectively. These values were significantly lower than those obtained for the overall data set, 42.9 and 58.1 ppb, revealing the significant role of local influences on CH₄ concentrations despite the low frequency of southeast winds recorded at the measuring site, 16.9 %.