Type 0092丝状菌污泥微膨胀在短程硝化中的实现

利用Type 0092丝状菌不易引发污泥恶性膨胀的特点,本实验采用实际生活污水,以SBR反应器接种短程硝化污泥,考察了短程硝化状态下启动Type 0092丝状菌污泥微膨胀的特性,研究了系统启动与维持期间的污泥沉降性能、亚硝酸盐积累率(NAR)、污染物去除特性以及污泥菌群结构变化情况.结果表明控制DO为0. 3～0. 8 mg·L~(-1),F/M(以COD/MLSS计)=0. 24 kg·(kg·d)~(-1),按照交替缺氧/好氧模式运行(单周期3次,缺氧∶好氧=20 min∶60 min),能够启动Type 0092丝状菌污泥微膨胀与短程硝化耦合,系统SVI值维持在180 m L·g~(-1)左右,NAR一直维持在99%左右,COD和TN去除率能够分别提高约13%和5%,相较于传统全程硝化非微膨胀状态曝气量能节省约62. 5%.当交替缺氧/好氧模式变为单周期交替6次,缺氧∶好氧=10 min∶30 min,亚硝酸盐氧化菌(NOB)的活性会恢复,使短程硝化被破坏;低溶解氧、交替缺氧/好氧、低负荷是实现Type 0092丝状菌污泥微膨胀的关键因素,当负荷(以COD/MLSS计)大于0. 25 kg·(kg·d)~(-1)时,仅靠低溶解氧和间歇曝气无法维持污泥微膨胀状态.     

Development of Customized Fire Behavior Fuel Models for Boreal Forests of Northeastern China

Knowledge of forest fuels and their potential fire behavior across a landscape is essential in fire management. Four customized fire behavior fuel models that differed significantly in fuels characteristics and environmental conditions were identified using hierarchical cluster analysis based on fuels data collected across a boreal forest landscape in northeastern China. Fuel model I represented the dense and heavily branched Pinus pumila shrubland which has significant fine live woody fuels. These forests occur mainly at higher mountain elevations. Fuel model II is applicable to forests dominated by Betula platyphylla and Populus davidiana occurring in native forests on hill slopes or at low mountain elevations. This fuel model was differentiated from other fuel models by higher herbaceous cover and lower fine live woody loading. The primary coniferous forests dominated by Larix gmelini and Pinus sylvestris L. var. mongolica were classified as fuel model III and fuel model IV. Those fuel models differed from one another in average cover and height of understory shrub and herbaceous layers as well as in aspect. The potential fire behavior for each fuel model was simulated with the BehavePlus5.0 fire behavior prediction system. The simulation results indicated that the Pinus pumila shrubland fuels had the most severe fire behavior for the 97th percentile weather condition, and had the least severe fire behavior under 90th percentile weather condition. Fuel model II presented the least severe fire potential across weather conditions. Fuel model IV resulted in greater fire severity than Fuel model III across the two weather scenarios that were examined.     

国家环境保护模范城市现状分析及展望

改革开放以来,在我国经济快速发展的同时,产生了巨大的环境问题,为此,原国家环保总局审时度势,开展了创建国家环境保护模范城市的活动。本文对“创模”考核指标的调整情况进行概括,从总体情况、所属行政区、所属行政区级别、面积4个方面对目前“环保模范”城市状况进行了深入地分析,并对日后的“创模”工作进行了展望。     

含硫油气井井控技术及管理方法

伴随着石油工业的发展,井喷、井控不可避免。为防止溢流、井喷,企业、政府投入了大量的人力、物力、财力,成果显著。但同时也产生了一些副作用,过量投资,资源浪费,地层严重污染,含硫油气井更是如此。基于含硫油气井钻完井的特点,制定了含硫油气井井控工作原则,研究了包含防爆、保证防喷器可靠、保证节流放喷相关装置可靠、保证压井相关装置可靠及保证井眼力学完整在内的含硫油气井严格防止井喷失控技术,选用合适的压井方法避免发生井喷技术,简化关井操作程序及修改钻井液密度附加值来全面限制防溢流的技术及其相应的管理方法。对含硫油气井科学、安全、高效的进行井控工作提供了理论指导,对于含硫油气井的开发具有重要的意义。     

氨法烟气脱硫工艺在燃煤锅炉的应用

介绍了氨法脱硫技术在国内外的应用情况以及氨法烟气脱硫工艺的工作原理和工程应用难点;分析了热电厂煤粉锅炉烟气脱硫的工艺路线特点及新型氨法脱硫工艺应用后取得了的显著效果;提出了氨法脱硫工艺存在的问题和发展前景。     

双膜技术在印染废水回用工程的应用

以盛虹集团印染废水回用工程为例,分析了＂SMF＋HAPRO＂双膜技术在印染废水深度处理中的应用。应用情况表明,印染废水经该技术处理后,产水水质优良,满足了生产用水的要求,同时给应用企业带来了经济、环境和社会效益。     

UV光解技术在采油（气）田脱水废气处理中的应用

采用UV高效光解净化设备,对采油（气）田TEG脱水工艺产生的废气深度净化、脱臭,其净化效率达99%;同时克服了废气成分复杂、浓度高、含水率高、环境温差大、防爆要求高等废气净化方法的限制性难题,并能广泛适用于多种行业的废气净化。     

高等职业教育中提高教师教学质量的思考

主要从4个方面对提高高等职业教育教师教学质量的途径和方法进行探讨:一是认真学习高等职业教育的文件政策,熟悉高等职业教育的教学规律;二是与时俱进,树立先进的高职教育理念;三是实事求是,忠于职守,坚持认真负责的教学态度;四是勇于创新,钻研教学艺术,形成高职教育的教学风格。     

Modelling above- and below-ground mass loss and N dynamics in wooden dowels (LIDET) placed across North and Central America biomes at the decadal time scale

This article focuses on modelling above and below-ground mass loss and nitrogen (N) dynamics based on the wooden dowels (Gonystylus bancanus [Miq.] Kurz) of the decadal Long-term Intersite Decomposition Experiment (LIDET) data. These dowels were placed at 27 locations across North and Central America, involving tropical, temperate and boreal forests, grasslands, wetlands and the tundra. The dowel, inserted vertically into the soil with one half remaining exposed to the air, revealed fast mass and N losses under warm to humid conditions, and slow losses under wet as well as cold to dry conditions. The model formulation, referred to as the Wood Decomposition Model, or WDM, related these losses to (i) mean annual precipitation, mean monthly January and July air temperatures, and (ii) mean annual actual evapotranspiration (AET) at each location. The resulting calibrations conformed well to the time-in-field averages for mass remaining by location: R² = 0.83 and 0.90 for the lower and upper parts, respectively. These values dropped, respectively, to 0.41 and 0.55 for the N concentrations, and to 0.28 and 0.43 for N remaining. These reductions likely refer to error propagation and to as yet unresolved variations in N transference into and out of the wood specific to each individual dowel location. Recalibrating the model parameters by ecosystem type reduced the R² values for actual versus best-fitted mass loss by about 0.15. Doing the same without location- or ecosystem-specific adjustments reduced the R² values further, by about 0.3.     

一株耐铜不动杆菌USTB-F的富集特性

采用浓度梯度筛选的方法,从铜污染土壤中分离筛选到一株耐受铜的菌株USTB-F,最高耐受浓度为560mg·L-1.通过生理生化实验和16SrDNA序列分析鉴定属于不动杆菌属,命名为Acinetobacter sp.USTB-F.用单因素方法得到USTB-F的最适生长条件为:T=30℃;pH=6.0;NaCl浓度为0.3%...