Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO₂ emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production.Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO₂ emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions.Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement.     

Alternative mating tactics in dimorphic males of the harvestman <Emphasis Type="Italic">Longiperna concolor</Emphasis> (Arachnida: Opiliones)

Intense male–male competition for females may drive the evolution of male morphological dimorphism, which is frequently associated with alternative mating tactics. Using modern techniques for the detection of discontinuous allometries, we describe male dimorphism in the Neotropical harvestman Longiperna concolor, the males of which use their elongated, sexually dimorphic legs IV in fights for the possession of territories where females lay eggs. We also tested three predictions related to the existence of alternative mating tactics: (1) if individuals with relatively longer legs IV (majors) are more likely to monopolize access to reproductive resources, they are expected to remain close to stable groups of females more than individuals with relatively shorter legs IV (minors) do; (2) if minors achieve fertilization by moving between territories, they are expected to be less faithful to specific sites; and (3) majors should be observed in aggressive interactions more often. We individually marked all the individuals from a population of Longiperna during the reproductive season and recorded the location of each sighting for males and females as well as the identity of males involved in fights. Majors were more likely to have harems, and large majors were even more likely to do so. Majors were more philopatric and all males involved in fights belonged to this morph. These results strongly suggest that the mating tactic of the majors is based on resource defense whereas that of the minors probably relies on sneaking into the territories of the majors and furtively copulating with females.     

Cement and concrete flow analysis in a rapidly expanding economy: Ireland as a case study

A national material flow model for concrete, the most popular construction material in Ireland, was developed based on the framework of material flow analysis. Using this model the Irish concrete cycle for the year 2007 was constructed by analysing the material life cycle of concrete which consists of the three phases of: production (including extraction of raw materials and manufacture of cement), usage (ready-mix and other products) and waste management (disposal or recovery). In this year, approximately 35 million metric tonnes of raw materials were consumed to produce 5 million metric tonnes of cement and 33 million metric tonnes of concrete. Concrete production was approximately 8 metric tonnes per capita. By comparison, the concrete waste produced in that year was minimal at only 0.3 million metric tonnes. Irish building stock is young and there was little demolition of structures in the year of study. However this build up of construction stock will have implications for the future waste flows when the majority of stock built in the last decade (43% of residential stock was constructed in the last 15 years) reaches its end of life.     

Participatory development for regional sustainability in Western Australia: an enabling state?

Regionally specific sustainability processes that account for diverse environments and populations and that integrate social, economic, political and ecological spheres are being developed in Western Australia. A coordinated commitment to sustainability principles and a participatory philosophy by the state and local governments is necessary. This requires a transformation of the public service, from a director of passive programmes and laws to a facilitator of community projects and outcomes, towards an enabling state. An international participatory paradigm provides an array of concepts and methods for local and regional communities in partnership with government and industry to achieve this. Participatory methodologies are utilised successfully around the globe to create an institutional framework that facilitates a process of dialogue, partnership, networking, learning and managing change. This paper examines the potential contribution of a participatory approach to improve the participatory capacity of regional communities and both local and state governments towards the facilitation of regional sustainability processes.     

How conservation and humanitarian groups respond to production of border security on the Arizona–Sonora border

US policies for securing the border with Mexico are driven by multiple political concerns, including the desire to control illegal trade and immigration in a way that conveys “border security” to a national audience. Highly visible border enforcement near urban centres and via the border fence has pushed migrants into far less visible and remote wilderness areas, driving both ecological degradation and a humanitarian crisis. This study employed ethnographic methods to explore how natural resource agency employees and humanitarian volunteers in Altar Valley Arizona perceived and responded to the production of border security. We found that both groups recognised human rights and environmental concerns, although they assigned different priorities and addressed them through conflicting means. As in other cases where consumers are separated from production practices, there was a general consensus among informants that it was important to raise the consciousness of the national audience about the negative externalities of producing border security.     

Potential of capillary electrophoresis mass spectrometry for the characterization and monitoring of amine-derivatized naphthenic acids from oil sands process-affected water

Capillary electrophoresis coupled to mass spectrometry(CE–MS) was used for the analysis of naphthenic acid fraction compounds(NAFCs) of oil sands process-affected water(OSPW). A standard mixture of amine-derivatized naphthenic acids is injected directly onto the CE column and analyzed by CE–MS in less than 15 min. Time of flight MS analysis(TOFMS), optimized for high molecular weight ions, showed NAFCs between 250 and 800 m/z. With a quadrupole mass analyzer, only low-molecular weight NAFCs(between 100 and 450 m/z) are visible under our experimental conditions. Derivatization of NAFCs consisted of two-step amidation reactions mediated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide(EDC), or mediated by a mixture of EDC and N-hydroxysuccinimide, in dimethyl sulfoxide, dichloromethane or ethyl acetate. The optimum background electrolyte composition was determined to be 30%(V/V) methanol in water and 2%(V/V) formic acid. NAFCs extracted from OSPW in the Athabasca oil sands region were used to demonstrate the feasibility of CE–MS for the analysis of NAFCs in environmental samples, showing that the labeled naphthenic acids are in the mass range of 350 to 1500 m/z.     

Potential end of life application of African star apple shell and waste toner powder as composite filler materials

Journal of Material Cycles and Waste Management - This study contributes towards showing the potential end-of-life application of common wastes namely: Waste Toner powder (WTP) and African star...     

Consumer Choice and Farmers’ Markets

The increasing popularity of local food consumption can be attributed to the heightened awareness of food safety concerns, carbon emissions produced from food transportation, and an understanding of how large corporations’ obtain their food supplies. Although there is increasing discussion on both the local and organic food movement independently, there is not a wide availability of literature examining the motivations and perceptions of consumers with regard to farmers’ markets. Issues such as perceptions about what type of food consumers are purchasing at markets, nor the main motivations for frequenting such establishments are discussed. Therefore the purpose of this study was to determine consumer motivations, benefits, and perceptions of farmers’ markets. Using the case study location of Toronto, Canada, this study surveyed 300 participants during the fall of 2011. Findings indicated that the main purpose for visiting famers’ markets is not solely to fulfill grocery needs. Quality of products offered and the ability to support the local community were the primary motivators to visit the markets.     

Performance of comprehensive first trimester fetal anatomy assessment

Objective

Ultrasound assessment of the fetal anatomy and fetal echocardiography are feasible in the first trimester of pregnancy. This study was designed to assess the performance of a comprehensive fetal anatomy assessment in a high-risk population at a tertiary fetal medicine unit.

Methods

A retrospective review of high-risk patients undergoing comprehensive fetal anatomy ultrasound assessment between 11 weeks and 13 + 6 weeks of gestation was conducted. Findings of the early anatomy ultrasound scan were compared with those of the second trimester anatomy scan, and birth outcomes or post-mortem results.

Results

Early anatomy ultrasounds were performed in 765 patients. The sensitivity of the scan for detecting fetal anomalies compared to the birth outcome was 80.5% (95% CI 73.5–86.3) and specificity was 93.1% (95%CI 90.6–95.2). Positive and negative predictive values were 78.5% (95% CI 71.4–84.6) and 93.9% (95% CI 91.4–95.8), respectively. The most missed and overdiagnosed abnormalities were ventricular septal defects. The second trimester ultrasound had sensitivity of 69.0% (95% CI 55.5–80.5) and specificity of 87.5% (95% CI 84.3–90.2).

Conclusions

In a high-risk population, early assessments had similar performance metrics as the second trimester anatomy ultrasound. We advocate for a comprehensive fetal assessment in the care of high-risk pregnancies.