Gloves against mineral oils and mechanical hazards: composites of carboxylated acrylonitrile–butadiene rubber latex

Resistance to permeation of noxious chemical substances should be accompanied by resistance to mechanical factors because the glove material may be torn, cut or punctured in the workplace. This study reports on glove materials, protecting against mineral oils and mechanical hazards, made of carboxylated acrylonitrile–butadiene rubber (XNBR) latex. The obtained materials were characterized by a very high resistance of the produced materials to oil permeation (breakthrough time?>?480?min). The mechanical properties, and especially tear resistance, of the studied materials were improved after the addition of modified bentonite (nanofiller) to the XNBR latex mixture. The nanocomposite meets the requirements in terms of parameters characterizing tear, abrasion, cut and puncture resistance. Therefore, the developed material may be used for the production of multifunctional protective gloves.     

Dimensions of Job Control in Computerized and Traditional Office Work and Its Health Effects

This study investigates whether a consistent relationship exists between computerization and job control. It also examines the role of job control as a predictor of stress symptoms typical for data entry and word processing (VDU) work. Two groups of VDU users and two comparable non-VDU-user groups took part in this study. A special questionnaire made it possible to assess global job control and four indexes of control related to specific aspects of work (control over choice of tasks and methods, control over time frame, control related to one’s skill, and control related to participation in the decision-making process). Results did not show an unequivocal relation between computerization and the latitude of control. The latitude of control depends on the task performed and the aspect of control we are considering. Regression analyses showed that global control is a good predictor of job satisfaction, some mood disturbances, and visual complaints. The other aspects of control are related in a variety of ways to stress symptoms. The role of a Type A behavior pattern in the relationship between job control and stress symptoms varies depending on which aspect of control is being considered. It was concluded that because of the high functional differences between various aspects of control, it is better to avoid using the concept of global control and, when possible, apply specific indexes of control.     

Decreasing the hazardous effect of waste quartz powder and the toxicity of epoxy resin by its synergistic application in industrial coatings

Environmental Science and Pollution Research - Quartz powder sourced from industrial wastes is very hazardous. It is because it contains large amounts of fine particles. Thus, it has the potential...     

Internal and External Factors Influencing Time-Related Injury Risk in Continuous Shift Work

Time-related accident risk in shift work may be attributed to internal factors, such as fatigue, level of performance, sleep propensity, and to some external factors, like shift system, physical and social environment. Six hundred and sixty-eight events in the metallurgical industry have been analysed in terms of time of day, time on task, consecutive day of the shift block, day of the week, and season.

The injury rate was similar on all shifts but more severe accidents happened in the nighttime. Somewhat more injuries occurred in the second half of the shift, in the second part of a shift block, and in summer compared with winter. There were fewer injuries at weekends.     

Investigations of single and multilayer structures using lock-in thermography--possible applications.

This paper presents a study of the possibilities of evaluating thermal parameters of single and multilayer structures using dynamic thermography. It also discusses potential uses of lock-in thermography. It presents a simulation of a periodic excitation of a multilayer composite material. In practice, the described methods can be employed in various applications, for example, in multilayer nonwoven microelectronic components manufactured from hemp fibers, chemical fibers, with an addition of electrically conducting fibers, and in medicine and biology. This paper describes tests conducted with lock-in thermography on carbon fibre reinforced composites with implanted delamination defects. Lock-in thermography is a versatile tool for non-destructive evaluation (NDE). Lock-in thermography is a fast, remote and non-destructive procedure. Hence, it has been used to detect delaminations in the composite structure of aircraft. This method directly contributes to an improvement in safety.     

Luminance of the Surround and Visual Fatigue of VDT Operators

Luminance distribution in the visual field is considered as one of causal factors with a significant influence on visual fatigue, especially for intensive and extended Video Display Terminal (VDT) work. The aim of the study was to define visual fatigue of VDT operators for different values of surrounding luminance. Experiments were carried out in laboratory conditions under 3 lighting conditions. Only 1 lighting parameter—the luminance of the wall behind the display (surrounding luminance)—changed. Visual fatigue was measured both by a subjective evaluation of different visual complaints (asthenopic symptoms) and by objective measurements of changes in the following visual functions: accommodation, convergence, habitual horizontal phoria, critical fusional frequency (CFF), and visual acuity. The same experiments were done for CRT (Cathode Ray Tube) and LCD TFT (Liquid Crystal Display with Thin Film Transistor) screens. The results of the study have shown that there was no significant influence of the value of surrounding luminance on the asthenopic symptoms for either type of screen. A general tendency towards bigger visual complaints for LCD TFT than for CRT participants was found. An objective evaluation of visual fatigue demonstrated a tendency towards bigger changes in visual functions with an increase of surrounding luminance for both screens. Statistical analysis of the results has shown that surrounding luminance influences significantly the reduction of the accommodation amplitude (significance level < .05).     

Determining Attenuation of Impulse Noise With an Electrical Equivalent of a Hearing Protection Device

Determining the effectiveness of impulse noise attenuation with hearing protection devices (HPDs) is an important part of their selection. Measuring impulse noise parameters under an HPD would involve exposing subjects to impulses with a high peak sound pressure level. This paper presents a computational method of determining impulse noise parameters under the cups of earmuffs. Calculations are done using the transfer function of earmuffs, determined with Shaw’s electrical equivalent of an HPD, taking into account the design parameters of earmuffs. The developed method was used for calculations in the presence of impulse noise generated by gunshots. To verify the computational method, the results of these calculations were compared with the results of measurements.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

Decline in body size and female fraction in the grass snake (Natrix natrix,Linnaeus 1758) population after 40 years (Southern Poland)

Environmental Science and Pollution Research - Depletion of free-living populations is often associated with changes in fitness-related traits, e.g., body size. Ongoing decrease in body size has...     

The circular economy and the Green Jobs creation

Environmental Science and Pollution Research - The circular economy (CE) is a proposal for a new, more sustainable, and durable economy model. As a consequence, this pro-environmental economic...