Enhancement of biomethane production from cattle manure with codigestion of dilute acid pretreated lignocellulosic biomass

It is well known that dilute sulfuric acid pretreatment of the lignicellulosisc biomass is an effective approach used for the production of the ethanol. However, there are less studies on the biogas production from the pretreated lignocellulosics and hardly data available on the codigestion of cattle manure with the pretreated lignocellulosisc material. The aim of this study was to evaluate biomethane production potential of codigestion of cattle manure with dilute acid pretreated lignocellulosic biomass. Sugarcane bagasse and rice husk was pretreated with dilute sulfuric acid or phosphoric acid at 121°C for 20 minutes and subsequently subjected to anaerobic digestion alone or codigested with cattle manure.

The results showed that codigestion of 1% phosphoric acid pretreated rice husk with cattle manure led to the highest methane production of 115 Nmlg^?1VS while monodigestion of cattle manure and phosphoric acid pretreated rice husk produced 98 and 87 Nmlg^?1VS, respectively. An inhibition was observed in anaerobic digestion of sulfuric acid pretreated rice husk and sugarcane bagasse during monodigestion and codigestion with cattle manure.

The study concludes that dilute phosphoric acid pretreated lignocellulosics like sugarcane bagasse and rice husk can be used as a cosubstrate with cattle manure in anaerobic digestion for enhanced methane production. Dilute sulfuric acid pretreatment, which is effective method for the bioethanol production, causes inhibition during anaerobic digestion of the pretreated lignocellulosics.     

Characterization of municipal and dairy wastewaters with 30 quality parameters and potential wastewater treatment by biological trickling filters

This study aimed to characterize raw municipal and dairy wastewaters. The quality of the collected wastewaters was determined by measuring 30 quality parameters, such as phenols, oxidation-reduction potential, oil and grease, total organic carbon (TOC), manganese, total viable count of bacteria (TVC), salinity, and biodegradability. Results were compared with wastewater disposal standards. This study also aimed to describe the potential application and performance of biological trickling filters (BTFs) in municipal and dairy wastewater treatment. Detailed reviews of trickling filter models were explained. Results revealed that two wastewater samples exceeded standard limits. The raw municipal and dairy wastewaters need treatment prior to disposal to the natural environment. Additionally, BTFs are efficient municipal and dairy wastewater treatments.     

Government management and overexploitation of groundwater resources: absence of local community initiatives in Ardabil plain-Iran

Although mismanagement of groundwater resources has resulted in their destruction over centuries, climate change is speeding up this process more than ever. On the one hand, urgent action by government bodies is needed to address the challenge. On the other hand, a vast body of literature proves that bottom-up collective action, although requiring a longer time period, is a better solution to manage such resources. This research aims to address this dilemma. The groundwater resource in Ardabil plain in Iran, which has long been managed solely through government intervention, has been chosen as a case study to explore the opportunities and limitations of managing a critically endangered area from a common pool resource perspective. Our study suggests that managing Ardabil groundwater resources should be conducted on two scales. The bottom-up institutional agreements should take place at village scale while the government should stay in charge of the overall organization at plain scale.     

Selective separation of virgin and post-consumer polymers (PET and PVC) by flotation method

More and more polymer wastes are generated by industry and householders today. Recycling is an important process to reduce the amount of waste resulting from human activities. Currently, recycling technologies use relatively homogeneous polymers because hand-sorting waste is costly. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. At present, most waste polymers cause serious environmental problems. Burning polymers for recycling is not practiced since poisonous gases are released during the burning process. Particularly, polyvinyl chloride (PVC) materials among waste polymers generate hazardous HCl gas, dioxins containing Cl, etc., which lead to air pollution and shorten the life of the incinerator. In addition, they make other polymers difficult to recycle.Both polyethylene terephthalate (PET) and PVC have densities of 1.30–1.35 g/cm³ and cannot be separated using conventional gravity separation techniques. For this reason, polymer recycling needs new techniques. Among these techniques, froth flotation, which is also used in mineral processing, can be useful because of its low cost and simplicity.The main objective of this research is to recycle PET and PVC selectively from post-consumer polymer wastes and virgin polymers by using froth flotation. According to the results, all PVC particles were floated with 98.8% efficiency in virgin polymer separation while PET particles were obtained with 99.7% purity and 57.0% efficiency in post-consumer polymer separation.     

Application of inherent safety principles to dust explosion prevention and mitigation

The aim of the current work is to explicitly link the inherent safety principles of minimization, substitution, moderation and simplification with strategies for dust explosion prevention and mitigation. A brief review of inherent safety and its basic principles is first given. This is followed by a discussion of various ways in which the dust explosion hazard can be minimized, substituted, moderated and simplified. Particular attention is paid to the relationship between each inherent safety principle and (i) various dust explosibility parameters, (ii) alternate methods of processing, (iii) selection of process equipment, and (iv) development and implementation of safe-work procedures. Original research results are presented, along with industrial case studies and previously published results that have been reinterpreted in terms of inherent safety and its basic principles. It is anticipated that this research will be of value to industry as a complement to the relatively well-established suite of engineered and procedural dust explosion risk reduction measures.     

Investigation of thermal treatment on selective separation of post consumer plastics prior to froth flotation

Plastics have become the widely used materials because of their advantages, such as cheapness, endurance, lightness, and hygiene. However, they cause waste and soil pollution and they do not easily decompose. Many promising technologies are being investigated for separating mixed thermoplastics, but they are still uneconomical and unreliable. Depending on their surface characteristics, these plastics can be separated from each other by flotation method which is useful mineral processing technique with its low cost and simplicity.The main objective of this study is to investigate the flotation characteristics of PET and PVC and determine the effect of plasticizer reagents on efficient plastic separation. For that purpose, various parameters such as pH, plasticizer concentration, plasticizer type, conditioning temperature and thermal conditioning were investigated. As a result, PET particles were floated with 95.1% purity and 65.3% efficiency while PVC particles were obtained with 98.1% purity and 65.3% efficiency.     

Reliable method for prediction of the flash point of various classes of amines on the basis of some molecular moieties for safety measures in industrial processes

This work presents a novel, reliable and simple method of estimating the flash point of various types of flammable amines, which are important for safety measures in industrial processes. Different amines include aliphatic amines such as primary, secondary, tertiary and cyclic amines as well as aromatic amines and hetero arenes containing nitrogen heteroatom. The proposed correlation is based on the contribution of some specific molecular moieties and functional groups, which can easily be used for any types of amines. Intermolecular forces are important in the new method, which are counted by two increasing and decreasing parameters. The root mean square (rms) deviation is 18 K for different classes of amines including 133 diverse compounds. The estimated flash points have been compared with one of the best available predictive methods, which gives much lower value of the rms deviation.     

Gemstone mining as a development cluster: A study of Brazil’s emerald mines

For many centuries, emeralds have bejeweled the rich and famous all over the world. Emeralds have also made many millionaires overnight, sometimes by chance, as in some of the cases reported in this study. On the other hand, even though emerald mining has brought some economic benefits, many of these have remained at the top of the production chain. In many cases mining activities have caused a number of negative social and environmental impacts locally. Working conditions in small mines are very poor in general: with bad ventilation, high temperatures, long working hours, lack of safety, informal working contracts and no health or life insurance. Environmental impacts can be significant, such as widespread deforestation, erosion of abandoned mines, and soil and water pollution in streams. The economic and social public benefits can be minimal. Even when taxes on gem mining are relatively low, much of the mining local activity is informal and the high value-added formal activities take place outside the mining regions. This study aims to understand the dynamics of emerald mining and its impact on local development using the concept of clusters. The research analyzes three case studies in Brazil: Campos Verdes/Santa Terezinha (Goias state), Nova Era/Itabira (Minas Gerais state) and Carnaiba/Campo Formoso (Bahia state). Emerald mining regions attract many migrants, increasing the demand for public services (infrastructure, health, education, etc.), but local governments are unable to provide for them because the activity produces little tax revenue. In the end, there is a growing mismatch between demand and supply of public services, leading to a series of social and environmental problems. However, working with the concept of cluster can help to shed light on policies to improve the local benefits of gem mining, by organizing the miners and their supporting organizations to allow investments that bring long term benefits locally.     

Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry

Warm-mix asphalt (WMA) has been gaining popularity in the asphalt industry primarily because of its ability to lower the energy required to blend asphalt mixes, which in turn results in less fuel consumption, slower aging of the asphalt binder and reduced emission of greenhouse gases. This paper evaluates the effects of different quantities of a WMA additive known as Sasobit^® on the required heat energy and the amount of CO₂ produced to increase the temperature of two aggregates from three sources and one binder from 25 °C to the point of mixing. The results showed that incorporating 1% Sasobit^® can potentially reduce the required heat energy and amount of CO₂ produced by 2.8% and 3.0%, respectively, for all aggregate types and sources investigated. The paper also presented design charts that enable energy policy makers and engineers to select the appropriate Sasobit^® content to produce the most cost effective asphalt mixture with less environmental impact. The design charts show that 1.6% Sasobit^® content is the most suitable proportion to be blended into the asphalt binder without compromising pavement resistance against fatigue failure. Two similar aggregates from different sources may exhibit similar specific gravities, but their specific heat capacities can vary widely. These differences have a significant effect on the required heat energy, asphalt production cost and the amount of emissions released into the environment.     

The dynamics effect of green technology innovation on economic growth and CO2 emission in Singapore: new evidence from bootstrap ARDL approach

Environmental Science and Pollution Research - For an economy to excel in growth, there is usually a trade-off between financial development and environment deterioration. For a country like...