Air quality assessment along Dhanbad - Jharia road

Road ambient air pollution status along Dhanbad – Jharia road isstudied and presented in this article. The selection of this areais made considering the importance of the road in Dhanbad district and the nature of activities taking place along the road, which reflect that the portion of road upto Dhansar can be considered as having commercial areas on both sides and that from Dhansar to Jharia as having industrial areas on both sides.For the assessment of the ambient air quality along the road monitoring is done at the following five locations: Indian Schoolof Mines (ISM), main gate; Bankmore; Dhansar police check post; Dhansar opencast project agent office and a residential house beside the Rajapur opencast project. The location of ISM, maingate is specially chosen as this represents a commercial shoppingcomplexes and the situation can be compared with that at Bankmore. Monitoring of ambient air quality is done following thestandard procedure prescribed in IS: 5182. In addition the concentration of lead, zinc, copper, iron, manganese, cadmium metals in SPM is also monitored. The ambient air quality is monitored in the months of September and November 1999, respectively, to represent monsoon and winter seasons. The SPM concentration observed at all the five locations in the winterseason is more than the permissible limits for commercial andindustrial areas. However, in the monsoon season, the SPM concentration is higher than the permissible limit at the twocommercial locations, i.e., ISM gate and Bankmore, while it isless than the prescribed limit for industrial areas at the remaining three locations. At the ISM gate and Bankmore the SPM generation is mainly by vehicular traffic while at other three locations it was in addition due to mining and other activities.     

The plant physical features selected by wildcats as signal posts: an economic approach to fecal marking

The chemical signals of solitary and territorial felid species are essential for their intraspecific communication. We studied the selection of plant substrates during the fecal marking behavior of the European wildcat Felis silvestris from September 2008 to June 2009 in a protected area in Northwest Spain. The aim of the study was to examine the selection of plants as signal posts with respect to their physical characteristics. We hypothesized that wildcats deposit their fecal marks on plants with physical characteristics (e.g., size, species, and visual conspicuousness) that enhance the olfactory and visual effectiveness of the signal. Our results indicate that diameter, plant group, visual conspicuousness, and interaction between the diameter and plant group influence the decision of wildcats to deposit their fecal marks on plants. The wildcats chose plants with greater diameters and greater visual conspicuousness as scent-marking posts. Moreover, the wildcats chose woody and herbaceous plants, and certain plant species were marked more frequently than expected at random. Indeed, our results indicate that the fecal marks were not randomly distributed on the plants: the wildcats chose to place their marks on plants with certain physical characteristics that maximized the detectability of the signal by intruders and potential mates, thus facilitating the spatial distribution of the species.     

Optimization of anaerobic digestion of municipal solid waste in combined process and sequential staging.

The optimization of anaerobic digestion aims to maximize organic waste stabilization after a short digestion period. This paper presents the optimization performance of the combined anaerobic digestion and sequential staging concept in a thermophilic, solid-state batch system as a treatment technology prior to landfill. The former involves enhanced pre-stage flushing with the addition of microaeration and inoculum in the methane phase. The latter involves leachate cross-recirculation between the mature and fresh waste reactors without conducting a pre-stage operation. The optimized process for combined anaerobic digestion showed that reducing the pre-stage operation with the maximum removal of organics from the waste bed is beneficial. Moreover, the sequential staging concept offers an improved process over the combined anaerobic digestion wherein the specific methane yield of 11.9 and 7.2 L CH4 kg(-1) volatile solids (VS) per day was achieved, respectively. After 28 days of operation, the sequential staging process showed an improved waste stabilization with 86 and 79% mass and volume reduction, respectively. A higher methane yield of 334 L CH4 kg(-1) VS with 86% VS reduction, which is equivalent to 84% process efficiency was obtained.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

Investigation of seat belt use among the drivers of different education levels

Seat belt use habit has been investigated according to the education level of drivers. Copies of a questionnaire were distributed to 1000 participants of four different education levels. Factors such as seat belt usage habit, restricting factors and crash data have been investigated. Data have been analyzed with SPSS 15.0 software. Increased level of education leads to increased seat belt usage, lower numbers of crashes and crash severities. The factors restricting seat belt use are lack of habit, discomfort and short distance driving. The use of precaution signal and increases in comfort can increase seat belt usage. The primary and high school education on traffic safety and seat belt usage has been serving the purpose.     

Field evaluation of resistivity sensors for in situ moisture measurement in a bioreactor landfill

The ability of resistance-based sensors to measure in situ waste moisture content in a landfill was examined. One hundred and thirty-five resistance-based sensors were installed in a leachate recirculation well field at a bioreactor landfill in Florida, US. The performance of these sensors was studied for a period of over 6 years. The sensors were found to respond to an increase in moisture resulting from leachate recirculation. It was observed that 78% of sensors worked successfully in the field during the study period. The initial spatial average moisture content determined by the sensor readings (using a laboratory-derived calibration) was 42.8% compared to 23% from gravimetric readings. Eighteen sensors (13%) showed that they were saturated before liquid addition, and no change in moisture content was observed in these sensors during the study period. Laboratory-derived calibration methods resulted in an over-estimation of moisture content. An alternate field-calibration method, where wetted sensor output was assumed equal to the average of gravimetric measurements for wet samples, was evaluated. The final spatial average moisture contents were 64.2% and 44.4% for the laboratory-derived and field-derived calibration methodologies, respectively, compared to 45% measured gravimetrically from excavated waste samples. When moisture content was determined using a mass balance approach, the result was 34.6%. The results suggest that when appropriately calibrated, resistivity-based sensors can be used to obtain a reasonably accurate estimate of local moisture content. However, caution should be taken to extend the moisture content values that are representative of waste surrounding the sensors to estimate the overall moisture content on the landfill-wide scale.