Deposition of aerially sprayed mexacarbate on balsam fir canopy and the forest floor: Relevance to ULV applications

Abstract

Spray deposit patterns were measured on aluminum coils and live balsam fir needles at different canopy heights, following aerial application of mexacarbate (4‐dimethylamino‐3,5‐xylyl N‐methylcarbamate) over a conifer forest in New Brunswick. Droplet size spectra of the spray cloud were determined on cylindrical Kromekote® cards placed at the corresponding crown heights. Ground deposits were collected on cylindrical Kromekote cards, aluminum coils and natural balsam fir foliage placed In forest clearings and under different types of vegetation.

Canopy deposits decreased progressively from the top to the bottom level of the tree crown. This trend was observed on aluminum coils, live fir foliage, and Kromekote cards. Droplet size spectra were similar at all sampling heights of the tree crown, and were comparable to those obtained on the ground cards placed in the forest clearings. Deposits of mexacarbate obtained on ground samplers on the open forest floor were markedly lower than those found at the top canopy but were similar to those at the mid or bottom canopy level. Droplet size spectra and mexacarbate deposits obtained on samplers placed under different types of forest vegetation indicated a selective filtration of the large droplets present in the spray cloud by plant canopies.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

Abstract

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half‐life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time‐motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

Mutagenicity evaluation of chemical pesticides

Abstract

Over the last few decades, the use of chemical pesticides has increased dramatically in the U.S. This relatively sudden increase greatly concerns the U.S. Environmental Protection Agency (EPA), since it has the responsibility for ensuring the safety of all pesticides used in the U.S. In response to this concern, EPA has established a review program, the Rebuttable Presumption Against Registration (RPAR), for periodically reassessing the mutagenic and carcinogenic potential of pesticide compounds.

This paper presents a review and evaluation of the data reported in the literature on six chemical pesticides suspect for mutagenic potential. The pesticide chemicals discussed are maleic hydrazide; rotenone; monuron; diallate; triallate, and benomyl.     

Seasonal variation of pharmaceutically active compounds in surface (Tagus River) and tap water (Central Spain)

Numerous studies have shown the presence of pharmaceutically active compounds (PhACs) in different environmental compartments, for example, in surface water or wastewater ranging from nanograms per litre to micrograms per litre. Likewise, some recent studies have pointed to seasonal variability, thus indicating that PhAcs concentrations in the aquatic environment may depend on the time of year. This work intended to find out (1) whether Tagus fluvial and drinking water were polluted with different groups of PhACs and (2) if their concentrations differed between winter and summer seasons. From the 58 substances analysed, 41 were found belonging to the main therapeutic groups. Statistical differences were seen for antibacterials, antidepressants, anxiolytics, antiepileptics, and cardiovascular drugs, with higher concentrations being detected in winter than in summer. These results might indicate that the PhACs analysed in this study undergo lower environmental degradation in winter than in summer. In order to confirm these initial results, a continuous monitoring should be performed especially on those PhACs that either because of an elevated consumption or an intrinsic chemical persistence are poorly degraded during winter months due to low temperatures and solar irradiation. It is especially important to identify which of these specific PhACs are in order to recommend their substitution by equally effective and safe substances but also environmentally friendly.     

Effects of agricultural pesticides on the health of Rana pipiens frogs sampled from the field

There is evidence that over the last 30 years, there have been mass declines in diverse geographic locations among amphibian populations due to disease outbreaks. Multiple causes have been suggested to explain this increase in disease incidence. Among these, climate changes, environmental pollution and reduced water quality are gaining attention. Indeed, some chemicals of environmental concerns are known to alter the immune system. It is possible that exposure to these pollutants could alter the immune system of anurans and render them more susceptible to different pathogens. In this study, we sampled Rana pipiens in five different sites near St. Lawrence River (Quebec, Canada) during the months of July and September in 2001. Two of these sites were protected areas, in which low levels of pesticides were detected, while the remaining three sites were located in areas with intensive corn and soybeans cultivations. Our results demonstrated that frogs living in agricultural regions are smaller in size and weight than frogs living in areas with lower levels of pesticides at both sampling times. Moreover, we have observed a significant decrease in the number of splenocytes (cellularity) and the phagocytic activity in frogs sampled in impacted sites. Taken together, these results suggest that frogs living in agricultural regions might be more vulnerable to infections and diseases through their smaller size and alteration of their immune system. Our results also contribute to the overall discussion on factors involved in amphibian declines.     

Photocatalytic degradation of contaminants of concern with composite NF-TiO2 films under visible and solar light

This study reports the synthesis and characterization of composite nitrogen and fluorine co-doped titanium dioxide (NF-TiO₂) for the removal of contaminants of concern in wastewater under visible and solar light. Monodisperse anatase TiO₂ nanoparticles of different sizes and Evonik P25 were assembled to immobilized NF-TiO₂ by direct incorporation into the sol–gel or by the layer-by-layer technique. The composite films were characterized with X-ray diffraction, high-resolution transmission electron microscopy, environmental scanning electron microscopy, and porosimetry analysis. The photocatalytic degradation of atrazine, carbamazepine, and caffeine was evaluated in a synthetic water solution and in an effluent from a hybrid biological concentrator reactor (BCR). Minor aggregation and improved distribution of monodisperse titania particles was obtained with NF-TiO₂-monodisperse (10 and 50 nm) from the layer-by-layer technique than with NF-TiO₂?+?monodisperse TiO₂ (300 nm) directly incorporated into the sol. The photocatalysts synthesized with the layer-by-layer method achieved significantly higher degradation rates in contrast with NF-TiO₂-monodisperse titania (300 nm) and slightly faster values when compared with NF-TiO₂-P25. Using NF-TiO₂ layer-by-layer with monodisperse TiO₂ (50 nm) under solar light irradiation, the respective degradation rates in synthetic water and BCR effluent were 14.6 and 9.5?×?10^?3?min^?1 for caffeine, 12.5 and 9.0?×?10^?3?min^?1 for carbamazepine, and 10.9 and 5.8?×?10^?3?min^?1 for atrazine. These results suggest that the layer-by-layer technique is a promising method for the synthesis of composite TiO₂-based films compared to the direct addition of nanoparticles into the sol.     

Potential of the microbial community present in an unimpacted beach sediment to remediate petroleum hydrocarbons

The potential of the microbial communities present in the intertidal zone of an unimpacted beach (a beach that did not suffer any significant oil spill) to degrade hydrocarbons was investigated. For that, laboratory-based microcosms (50-ml flasks) were set up with sandy beach sediment spiked with crude oil and incubated with local seawater for 15 days in the dark. Three bioremediation treatments were tested (biostimulation (BS), autochthonous bioaugmentation (AB), and combined treatment of biostimulation + bioaugmentation (BS + AB)) and the results were compared with natural attenuation (NA). Visual inspection showed clearly an oil solubility increase (confirmed by a higher hydrocarbons concentration in supernatant solutions) for all tested treatments when compared to NA. Significant degradation of the oil, shown by different profiles of petroleum hydrocarbons, was also observed for the different treatments particularly for BS + AB. Therefore, the microbial community of this unimpacted beach sediment could respond to an oil spill, degrading hydrocarbons. But to increase the natural attenuation pace, obtained results indicated that BS + AB is an appropriate approach for the bioremediation of beaches recently impacted by an oil spill. The autochthonous microbial cultures can be obtained “before” or “after” the contamination of the target site, being inoculated into the site right after it contamination.     

Characteristics and treatment of greywater—a review

Safe and sufficient quantity of water is necessary for a healthy growth of human beings. The gap between water demand and available water supply is increasing day by day. Proper sanitation, especially decentralized approach, can solve the problem of water supply and wastewater management and that can be done by reuse of greywater. Typically, from a household, greywater (GW) flow is around 65 % of the total wastewater flow. Further light greywater is around 50 % of the total GW. Hence, GW has a high potential for recycle and reuse. The aim of this article is to reveal the present state of art in GW treatment and to identify the further scope for research. Present article contains a review on per capita GW generation, GW characteristics, and its treatment. Around 22 treatment systems comprising different treatment processes are discussed in detail for removal efficiency of pollutants, effluent concentrations and their compliance with wastewater reuse guidelines and standards. Constructed wetland and filtration were found efficient in the removal of most of the reuse parameters compared to other technologies. Anaerobic followed by aerobic system with post-disinfection unit may be a sustainable option for GW treatment for reuse. There is a need to develop the technologies for GW treatment at household level to increase the reuse practises at grass root level. Further, there is need of development of flow diagram with different technologies by targeting the type of reuse (flushing, gardening, agriculture, etc.).     

PAH air pollution at a Portuguese urban area: carcinogenic risks and sources identification

This study aimed to characterize air pollution and the associated carcinogenic risks of polycyclic aromatic hydrocarbon (PAHs) at an urban site, to identify possible emission sources of PAHs using several statistical methodologies, and to analyze the influence of other air pollutants and meteorological variables on PAH concentrations.The air quality and meteorological data were collected in Oporto, the second largest city of Portugal. Eighteen PAHs (the 16 PAHs considered by United States Environment Protection Agency (USEPA) as priority pollutants, dibenzo[a,l]pyrene, and benzo[j]fluoranthene) were collected daily for 24 h in air (gas phase and in particles) during 40 consecutive days in November and December 2008 by constant low-flow samplers and using polytetrafluoroethylene (PTFE) membrane filters for particulate (PM₁₀ and PM_2.5 bound) PAHs and pre-cleaned polyurethane foam plugs for gaseous compounds. The other monitored air pollutants were SO₂, PM₁₀, NO₂, CO, and O₃; the meteorological variables were temperature, relative humidity, wind speed, total precipitation, and solar radiation. Benzo[a]pyrene reached a mean concentration of 2.02 ng?m^?3, surpassing the EU annual limit value. The target carcinogenic risks were equal than the health-based guideline level set by USEPA (10^?6) at the studied site, with the cancer risks of eight PAHs reaching senior levels of 9.98?×?10^?7 in PM₁₀ and 1.06?×?10^?6 in air. The applied statistical methods, correlation matrix, cluster analysis, and principal component analysis, were in agreement in the grouping of the PAHs. The groups were formed according to their chemical structure (number of rings), phase distribution, and emission sources. PAH diagnostic ratios were also calculated to evaluate the main emission sources. Diesel vehicular emissions were the major source of PAHs at the studied site. Besides that source, emissions from residential heating and oil refinery were identified to contribute to PAH levels at the respective area. Additionally, principal component regression indicated that SO₂, NO₂, PM₁₀, CO, and solar radiation had positive correlation with PAHs concentrations, while O₃, temperature, relative humidity, and wind speed were negatively correlated.