Hunter Reporting of Catch per Unit Effort as a Monitoring Tool in a Bushmeat‐Harvesting System

Abstract: Growing threats to biodiversity in the tropics mean there is an increasing need for effective monitoring that balances scientific rigor with practical feasibility. Alternatives to professional techniques are emerging that are based on the involvement of local people. Such locally based monitoring methods may be more sustainable over time, allow greater spatial coverage and quicker management decisions, lead to increased compliance, and help encourage attitude shifts toward more environmentally sustainable practices. Nevertheless, few studies have yet compared the findings or cost‐effectiveness of locally based methods with professional techniques or investigated the power of locally based methods to detect trends. We gathered data on bushmeat‐hunting catch and effort using a professional technique (accompanying hunters on hunting trips) and two locally based methods in which data were collected by hunters (hunting camp diaries and weekly hunter interviews) in a 15‐month study in Equatorial Guinea. Catch and effort results from locally based methods were strongly correlated with those of the professional technique and the spatial locations of hunting trips reported in the locally based methods accurately reflected those recorded with the professional technique. We used power simulations of catch and effort data to show that locally based methods can reliably detect meaningful levels of change (20% change with 80% power at significance level [α]= 0.05) in multispecies catch per unit effort. Locally based methods were the most cost‐effective for monitoring. Hunter interviews collected catch and effort data on 240% more hunts per person hour and 94% more hunts per unit cost, spent on monitoring, than the professional technique. Our results suggest that locally based monitoring can offer an accurate, cost‐effective, and sufficiently powerful method to monitor the status of natural resources. To establish such a system in Equatorial Guinea, the current lack of national and local capacity for monitoring and management must be addressed.     

Genetic Bottlenecks Driven by Population Disconnection

Abstract: Connectivity among populations plays a crucial role in maintaining genetic variation at a local scale, especially in small populations affected strongly by genetic drift. The negative consequences of population disconnection on allelic richness and gene diversity (heterozygosity) are well recognized and empirically established. It is not well recognized, however, that a sudden drop in local effective population size induced by such disconnection produces a temporary disequilibrium in allelic frequency distributions that is akin to the genetic signature of a demographic bottleneck. To document this effect, we used individual‐based simulations and empirical data on allelic richness and gene diversity in six pairs of isolated versus well‐connected (core) populations of European tree frogs. In our simulations, population disconnection depressed allelic richness more than heterozygosity and thus resulted in a temporary excess in gene diversity relative to mutation drift equilibrium (i.e., signature of a genetic bottleneck). We observed a similar excess in gene diversity in isolated populations of tree frogs. Our results show that population disconnection can create a genetic bottleneck in the absence of demographic collapse.     

Quantitative Assessment of a Tanzanian Integrated Conservation and Development Project Involving Butterfly Farming

Abstract: Scientific understanding of the role of development in conservation has been hindered by the quality of evaluations of integrated conservation and development projects. We used a quasi‐experimental design to quantitatively assess a conservation and development project involving commercial butterfly farming in the East Usambara Mountains of Tanzania. Using a survey of conservation attitudes, beliefs, knowledge, and behavior, we compared 150 butterfly farmers with a control group of 170 fellow community members. Due to the nonrandom assignment of individuals to the two groups, we used propensity‐score matching and weighting in our analyses to control for observed bias. Eighty percent of the farmers believed butterfly farming would be impossible if local forests were cleared, and butterfly farmers reported significantly more participation in forest conservation behaviors and were more likely to believe that conservation behaviors were effective. The two groups did not differ in terms of their general conservation attitudes, attitudes toward conservation officials, or knowledge of conservation‐friendly building techniques. The relationship between butterfly farming and conservation behavior was mediated by dependency on butterfly farming income. Assuming unobserved bias played a limited role, our findings suggest that participation in butterfly farming increased participation in conservation behaviors among project participants because farmers perceive a link between earnings from butterfly farming and forest conservation.     

Influence of tobacco smoke on carcinogenic PAH composition in indoor PM10 and PM2.5

Because of the mutagenic and/or carcinogenic properties, Polycyclic Aromatic Hydrocarbons (PAH), have a direct impact on human population. Consequently, there is a widespread interest in analysing and evaluating the exposure to PAH in different indoor environments, influenced by different emission sources. The information on indoor PAH is still limited, mainly in terms of PAH distribution in indoor particles of different sizes; thus, this study evaluated the influence of tobacco smoke on PM₁₀ and PM_2.5 characteristics, namely on their PAH compositions, with further aim to understand the negative impact of tobacco smoke on human health. Samples were collected at one site influenced by tobacco smoke and at one reference (non-smoking) site using low-volume samplers; the analyses of 17 PAH were performed by Microwave Assisted Extraction combined with Liquid Chromatography (MAE–LC). At the site influenced by tobacco smoke PM concentrations were higher 650% for PM₁₀, and 720% for PM_2.5. When influenced by smoking, 4 ring PAH (fluoranthene, pyrene, and chrysene) were the most abundant PAH, with concentrations 4600–21 000% and 5100–20 800% higher than at the reference site for PM₁₀ and PM_2.5, respectively, accounting for 49% of total PAH (Σ_PAH). Higher molecular weight PAH (5–6 rings) reached concentrations 300–1300% and 140–1700% higher for PM₁₀ and PM_2.5, respectively, at the site influenced by tobacco smoke. Considering 9 carcinogenic PAH this increase was 780% and 760% in PM₁₀ and PM_2.5, respectively, indicating the strong potential risk for human health. As different composition profiles of PAH in indoor PM were obtained for reference and smoking sites, those 9 carcinogens represented at the reference site 84% and 86% of Σ_PAH in PM₁₀ and PM_2.5, respectively, and at the smoking site 56% and 55% of Σ_PAH in PM₁₀ and PM_2.5, respectively. All PAH (including the carcinogenic ones) were mainly present in fine particles, which corresponds to a strong risk for cardiopulmonary disease and lung cancer; thus, these conclusions are relevant for the development of strategies to protect public health.     

Biodegradation of chlorpyrifos by either single or combined cultures of some soilborne plant pathogenic fungi

Abstract

Biodegradation of chlorpyrifos was studied in liquid culture media amended with either single or combined eight different plant pathogenic fungi isolated from the continuous cropping wheat fields. The average recovery of chlorpyrifos from the liquid media was found to be 86.1%. The detection limit of chlorpyrifos by the analytical method used was 19 ppb. Data showed that the growth of mixed fungi at concentrations up to 200 ppm of chlorpyrifos was higher than in the control treatment. Chlorpyrifos concentrations declined in the medium of combined fungi more than it did in the medium of any single fungus with increase in the incubation period. The amount of chlorpyrifos recovered was 79.8 ppm (39.9%) in the combined fungal cultures after 21 days. However, those recovered from the media of Fusarium graminearum, F. oxysporum, Rhizoctonia solani, Cladosporhim cladosporiodes, Cephalosporium sp., Trichoderma viridi, Alternaria alternata, and Cladorrhinum brunnescens, ranged from 48.0 to 74.8%. The half‐life value (T_1/2) for chlorpynfos was 15.8 day in the medium amended with mixed fungi. However, for the single cultures it ranged from 19.3 to 33.0 day.     

Fire Mosaics and Reptile Conservation in a Fire‐Prone Region

Fire influences the distribution of fauna in terrestrial biomes throughout the world. Use of fire to achieve a mosaic of vegetation in different stages of succession after burning (i.e., patch‐mosaic burning) is a dominant conservation practice in many regions. Despite this, knowledge of how the spatial attributes of vegetation mosaics created by fire affect fauna is extremely scarce, and it is unclear what kind of mosaic land managers should aim to achieve. We selected 28 landscapes (each 12.6 km²) that varied in the spatial extent and diversity of vegetation succession after fire in a 104,000 km² area in the semiarid region of southeastern Australia. We surveyed for reptiles at 280 sites nested within the 28 landscapes. The landscape‐level occurrence of 9 of the 22 species modeled was associated with the spatial extent of vegetation age classes created by fire. Biogeographic context and the extent of a vegetation type influenced 7 and 4 species, respectively. No species were associated with the diversity of vegetation ages within a landscape. Negative relations between reptile occurrence and both extent of recently burned vegetation (≤10 years postfire, n = 6) and long unburned vegetation (>35 years postfire, n = 4) suggested that a coarse‐grained mosaic of areas (e.g. >1000 ha) of midsuccessional vegetation (11–35 years postfire) may support the fire‐sensitive reptile species we modeled. This age class coincides with a peak in spinifex cover, a keystone structure for reptiles in semiarid and arid Australia. Maintaining over the long term a coarse‐grained mosaic of large areas of midsuccessional vegetation in mallee ecosystems will need to be balanced against the short‐term negative effects of large fires on many reptile species and a documented preference by species from other taxonomic groups, particularly birds, for older vegetation. Mosaicos de Fuego y la Conservación de Reptiles en una Región Propensa al Fuego     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

Conservation by Design

Abstract: Conservation researchers are increasingly aware of the need to conduct interdisciplinary research and to engage nonscientists in practical applications of conservation biology. But so far, industrial designers have been left out of such collaboration and outreach efforts. Conservation of wildlife often depends on products such as nest boxes, feeders, barriers, and corridors, all of which have a designed component that is frequently overlooked. Furthermore, many products are adopted without testing on short or long time scales. We argue that the design of products for conservation, and hence their functionality, effectiveness, and value, can be improved through collaboration with industrial designers. We see four key benefits that can arise from interactions with industrial designers: improvement of product quality and value, innovation and improvement in functionality of products, harmonization of conservation products with local values, and development of a psychological biomimesis approach to design. The role of industrial designers in conservation projects would be to improve factors such as product durability, affordability, functionality, and aesthetic appeal to local people. Designers can also help to create multiple product options whose success can be tested in the field. We propose that collaborations with industrial designers can contribute to the development of improvements to existing products and innovations in the practice of animal conservation.