Selective and sensitive extractive spectrophotometric determination of micro amounts of palladium(II) in spiked samples: using a new reagent N-ethyl-3-carbazolecarbaxaledehydethiosemicarbazone

N-Ethyl-3-cabazolecarboxaldehydethiosemicarbazone (ECCT) is proposed as a new, sensitive and selective complexing reagent for the separation and extractive spectrophotometric determination of palladium(II) at pH: 4.0 to form a yellowish orange colored 1:1 chelate complex, which is very well extracted in to n-butanol. The absorbance was measured at a maximum wavelength, 410 nm. This method obeys Beer’s law in the concentration range 0.0–6.6 μg mL⁻¹ and the correlation coefficient of Pd(II)-ECCT complex is 0.998, which indicates an excellent linearity between the two variables with good molar absorptivity and Sandell’s sensitivity, 1.647 × 10⁴ l mol⁻¹cm⁻¹, 6.49 × 10⁻³ μg cm⁻², respectively. The instability constant of complex calculated from Edmond’s method, 2.724 × 10⁻⁵ was in good agreement with the value calculated from Asmus’ method 2.624 × 10⁻⁵, at room temperature. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.839. Edmond’s method was observed to be a more selective method in the presence of EDTA, oxalate and phosphate ions. The method was successfully applied for the determination of Pd(II) in water samples, synthetic mixtures and hydrogenation catalysts, employing an atomic absorption spectrometer for comparing these results.     

Assessment of flubendiamide residues in pigeon pea in different agro-climatic zones of India

Supervised field trials were conducted at the research farms of four agricultural universities located at different agro-climatic zones of India to find out the harvest time residues of flubendiamide and its des-iodo metabolite on pigeon pea (Cajanus cajan) during the year 2006-2007. Two spray applications of flubendiamide 20 WDG at 50 g (T(1)) and 100 g (T(2)) a.i./ha were given to the crop at 15-days interval. The foliage samples at different time intervals were drawn at only one location, however, the harvest time samples of pigeon pea grain, shell, and straw were drawn at all the four locations. The residues were estimated by HPLC coupled with UV-VIS variable detector. No residues of flubendiamide and its des-iodo metabolite were found at harvest of the crop at or above the LOQ level of 0.05 μg/g. On the basis of the data generated, a pre-harvest interval (PHI) of 28 days has been recommended and the flubendiamide 20 WDG has been registered for use on pigeon pea by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India and the MRL has been fixed by Ministry of Health and Family Welfare, Government of India under Prevention of Food and Adulteration as 0.05 μg/g on pigeon pea grains.     

Impact of industrialization on groundwater quality – a case study of Peenya industrial area, Bangalore, India

The present study aims at identifying the groundwater contamination problems in Bangalore city in India. Groundwater samples from 30 different locations of the industrial area were collected. Analytical techniques as described in the Standard methods for the examination of water and wastewater were adopted for physico-chemical analysis of these samples and the results compared with the Bureau of Indian Standards (BIS) guideline values for potable water in the light of possible health hazards. The investigations reveal that most of the study area is highly contaminated due to the excessive concentrations of one or more water quality parameters such as Nitrates, Total Hardness, Calcium, Magnesium, Total dissolved solids, Sulphates and Fluorides, which have rendered nearly 77% of the water samples tested, non- potable. Discussions held by the authors with the local public as well as the Primary health centre authorities of the area revealed that a lot of people in the area are suffering from severe health problems on using this water. The findings show that there is a clear correlation between the ill health faced by the public and contamination of the said groundwaters.     

Geotechnical properties of municipal solid waste at different phases of biodegradation

This paper presents the results of laboratory investigation conducted to determine the variation of geotechnical properties of synthetic municipal solid waste (MSW) at different phases of degradation. Synthetic MSW samples were prepared based on the composition of MSW generated in the United States and were degraded in bioreactors with leachate recirculation. Degradation of the synthetic MSW was quantified based on the gas composition and organic content, and the samples exhumed from the bioreactor cells at different phases of degradation were tested for the geotechnical properties. Hydraulic conductivity, compressibility and shear strength of initial and degraded synthetic MSW were all determined at constant initial moisture content of 50% on wet weight basis. Hydraulic conductivity of synthetic MSW was reduced by two orders of magnitude due to degradation. Compression ratio was reduced from 0.34 for initial fresh waste to 0.15 for the mostly degraded waste. Direct shear tests showed that the fresh and degraded synthetic MSW exhibited continuous strength gain with increase in horizontal deformation, with the cohesion increased from 1 kPa for fresh MSW to 16–40 kPa for degraded MSW and the friction angle decreased from 35° for fresh MSW to 28° for degraded MSW. During the triaxial tests under CU condition, the total strength parameters, cohesion and friction angle, were found to vary from 21 to 57 kPa and 1° to 9°, respectively, while the effective strength parameters, cohesion and friction angle varied from 18 to 56 kPa and from 1° to 11°, respectively. Similar to direct shear test results, as the waste degrades an increase in cohesion and slight decrease in friction angle was observed. Decreased friction angle and increased cohesion with increased degradation is believed to be due to the highly cohesive nature of the synthetic MSW. Variation of synthetic MSW properties from this study also suggests that significant changes in geotechnical properties of MSW can occur due to enhanced degradation induced by leachate recirculation.     

Modelling livelihoods and household resilience to droughts using Bayesian networks

Over the last four decades, the Indian government has been investing heavily in watershed development (WSD) programmes that are intended to improve the livelihoods of rural agrarian communities and maintain or improve natural resource condition. Given the massive investment in WSD in India, and the recent shift from micro-scale programmes (<500 ha) to meso-scale (~5000 ha) clusters, robust methodological frameworks are needed to measure and analyse impacts of interventions across landscapes as well as between and within communities. In this paper, the sustainable livelihoods framework is implemented using Bayesian networks (BNs) to develop models of drought resilience and household livelihoods. Analysis of the natural capital component model provides little evidence that watershed development has influenced household resilience to drought and indicators of natural capital, beyond an increased area of irrigation due to greater access to groundwater. BNs have proved a valuable tool for implementing the sustainable livelihoods framework in a retrospective evaluation of implemented WSD programmes. Many of the challenges of evaluating watershed interventions using BNs are the same as for other analytical approaches. These are reliance on retrospective studies, identification and measurement of relevant indicators and isolating intervention impacts from contemporaneous events. The establishment of core biophysical and socio-economic indicators measured through longitudinal household surveys and monitoring programmes will be critical to the success of BNs as an evaluation tool for meso-scale WSD.     

Enantioselective effects of alpha-hexachlorocyclohexane (HCH) isomers on androgen receptor activity in vitro

Alpha-hexachlorocyclohexane (alpha-HCH), a part of the HCH pesticide mixture, is one of the most widespread persistent organic pollutants. Interestingly, only limited number of studies addressed the toxicity of alpha-HCH and the effects of its individual optical isomers have not been investigated in detail. In the present study we separated two alpha-HCH enantiomers by preparative HPLC and studied their activities towards androgen receptor (AR) using the MDA-kb2 cell line stably transfected with the luciferase reporter gene under the control of AR. There was no direct effect of alpha-HCH on AR but both isomers significantly suppressed the activity of AR in co-exposure with the natural ligand dihydrotestosterone in a concentration-dependent manner. One of the enantiomers appeared to be more active at lower concentration, which was also supported by the molecular modeling calculations with AR that showed a slight difference in estimated free energy of binding and inhibition constant between two enantiomers. Although studies with other pesticides demonstrated strong enantioselective differences in toxicity, the present research shows rather minor differences in modulations of AR by both alpha-HCH enantiomers. For the first time, enantioselective effects of alpha-HCH were demonstrated and the results suggest interaction with multiple regulatory events controlling the AR activity. Full elucidation of the toxicity mechanism will require further research.     

Enhanced heavy metal immobilization in soil by grinding with addition of nanometallic Ca/CaO dispersion mixture

This study investigated the use of a nanometallic Ca and CaO dispersion mixture for the immobilization of heavy metals (As, Cd, Cr and Pb) in contaminated soil. Simple grinding achieved 85-90% heavy metal immobilization, but it can be enhanced further to 98-100% by addition of a nanometallic Ca/CaO dispersion mixture produced by grinding. Observations using SEM-EDS elemental maps and semi-quantitative analysis showed that the amounts of As, Cd, Cr, and Pb measurable on the soil particle surface decrease after nanometallic Ca/CaO treatment. The leachable heavy metal concentrations were reduced after nanometallic Ca/CaO treatment to concentrations lower than the Japan soil elution standard regulatory threshold: <0.01 mg L⁻¹ for As, Cd, and Pb; and 0.05 mg L⁻¹ for Cr. Effects of soil moisture and pH on heavy metal immobilization were not strongly influenced. The most probable mechanisms for the enhancement of heavy metal immobilization capacity with nanometallic Ca/CaO treatment might be due to adsorption and entrapment of heavy metals into newly formed aggregates, thereby prompting aggregation of soil particles and enclosure/binding with Ca/CaO-associated immobile salts. Results suggest that the nanometallic Ca/CaO mixture is suitable for use in immobilization of heavy-metal-contaminated soil under normal moisture conditions.     

Fatty acid profile and elemental content of avocado (Persea americana Mill.) oil –effect of extraction methods

Interest in vegetable oil extracted from idioblast cells of avocado fruit is growing. In this study, five extraction methods to produce avocado oil have been compared: traditional solvent extraction using a Soxhlet or ultrasound, Soxhlet extraction combined with microwave or ultra-turrax treatment and supercritical fluid extraction (SFE). Traditional Soxhlet extraction produced the most reproducible results, 64.76 ± 0.24 g oil/100 g dry weight (DW) and 63.67 ± 0.20 g oil/100 g DW for Hass and Fuerte varieties, respectively. Microwave extraction gave the highest yield of oil (69.94%) from the Hass variety. Oils from microwave extraction had the highest fatty acid content; oils from SFE had wider range of fatty acids. Oils from Fuerte variety had a higher monounsaturated: saturated FA ratio (3.45–3.70). SFE and microwave extraction produced the best quality oil, better than traditional Soxhlet extraction, with the least amount of oxidizing metals present.     

Characterization and Application in Biocomposites of Residual Microalgal Biomass Generated in Third Generation Biodiesel

This research paper provides a brief discussion about the relevance of third generation biodiesel co-products diversification. This diversification can be performed through the utilization of residual microalgal biomass (RMB) after oil extraction process. The present work analyses the use of RMB as potential filler for biocomposite production by means of understanding the chemical composition, the thermal stability as well as the protein content of RMB. Thermogravimetric analysis revealed the processing window of the RMB for biocomposite production and its dependence on its purity, especially on residual fat content. Biocomposites of RMB and poly(butylene succinate) (PBS) were prepared by melting processing technique using extrusion followed by injection-molding. Tensile, flexural and impact properties of the processed samples were evaluated. Scanning electron microscopy of fractured sections of the biocomposites was also used to examine the dispersion of RMB in PBS matrix. Finally, this study shows a competitive alternative to produce PBS-RMB biocomposites by replacing PBS by RMB in the range between 20 and 30 %. However, further studies are necessary to improve the compatibility of RMB with PBS to obtain competitive mechanical properties, compared to neat materials through, for instance, block co-polymers.     

Emissions of polychlorinated biphenyls (PCBs) from sludge drying beds to the atmosphere in Chicago

Ambient air PCB concentrations in the Lake Calumet region in Southeast Chicago have been found to be significantly higher than in nearby non-urban areas. This area is highly industrialized and also contains municipal sludge drying facilities and landfills. In an effort to quantify the importance of the sludge drying facilities to the elevated concentrations, upwind/downwind air samples from the Calumet East sludge drying bed were obtained between April and October 2002. For these samples, the downwind minus upwind (downwind-upwind) concentration varied from 0.33 to 1.27ngm(-3) for non-northeast (NE) direction winds suggesting sludge drying is a source of PCBs to the atmosphere. However, the upwind concentrations were higher than the downwind for winds from the NE of the sampling site suggesting more significant source(s), possibly Lake Calumet or the so called "Cluster site" NE of the sludge drying beds. Flux chamber experiments carried out during the sampling period measured average PCB fluxes of 210ngm(-2)h(-1) (range 43-910ngm(-2)h(-1)) which resulted in an overall flux of 0.005kgday (d)(-1) ( approximately 2kgyr(-1)). A developed regression equation between moisture content and sludge concentration estimated higher PCB losses of 0.26kgd(-1) ( approximately 95kgyr(-1)). Although these two approaches yielded different values, they both indicate that the emission from the Calumet East sludge drying beds were of minimal importance when compared to the total estimated amount of 2-70kgd(-1) (700-2100kgyr(-1)) of PCBs entering the Chicago atmosphere.