Current Levels and Management of Solid Wastes in Nigeria

Solid waste is of serious concern in developing countries because of its high rate of generation and the low‐end quality of its management. Inefficient handling of solid wastes may result in deterioration of environmental quality, but it can also result in loss of potential resources. This study reviews current solid waste generation and management in Nigeria and the need for an effective collection, recovery, and recycling policy. Our review is based on literature searches and personal field surveys. Observations showed that uncontrolled electronic waste (e‐waste), agricultural‐waste (agro‐waste), scrap metals, waste polymers, and waste from the transportation sector are prevalent in Nigeria. Recent collection rates were less than 50% of the total solid waste generated (i.e., approximately 40% was collected). With an effective collection system and appropriate policies, the abundance of solid waste in the country could present material recovery and recycling opportunities that would boost the economy and move Nigeria closer to sustainable resource management.     

Drought,water access,and urban agriculture: a case study from Silicon Valley

In California, the growing popularity of urban agriculture (UA) has unfolded against a backdrop of historic drought. While UA is often celebrated as an urban sustainability strategy, it must be able to persist during drought if it is to perform these functions. Using Santa Clara County – the geographic core of Silicon Valley – as a case study, we use interviews and surveys to explore the implications of drought for UA. We show how developing an understanding of water access for UA during a drought requires examining the social and institutional context of water management and use. In metropolitan California, the highly decentralised water supply system combined with the diverse institutional arrangements that support UA create an uneven landscape of water access. Consequently, the pressure to change water-consuming practices – that is, the stress that institutional drought responses place on different water users – is geographically and socially differentiated. Among UA water users, responses to drought have also varied, in part because the possibilities for change are constrained by the sociotechnical arrangements of UA sites and the different purposes of UA.     

A Two-Stage Particle Swarm Optimization Algorithm for MPPT of Partially Shaded PV Arrays

The power-voltage (P-V) characteristic curves of a PV array are nonlinear and have multiple peaks under partially shaded conditions (PSCs). This paper proposes a novel maximum power point tracking (MPPT) method for a PV system with reduced steady-state oscillation based on a two-stage particle swarm optimization (PSO) algorithm. The grouping method of the shuffled frog leaping algorithm (SFLA) is incorporated in the basic PSO algorithm (PSO-SFLA), ensuring fast and accurate searching of the global extremum. An adaptive speed factor is also introduced into the improved PSO to further enhance its convergence speed. Test results show that the proposed method converges in less than half the time taken by the conventional PSO method, and the power is improved by 33% under the worst PSCs, which confirms the superiority of the proposed method over the standard PSO algorithm in terms of tracking speed and steady-state oscillations under different PSCs.     

Climate impact on agroeconomy in semiarid region of Armenia

With 21 % of gross domestic product (GDP) in agricultural sector and having consistently experienced natural disasters (e.g., drought, flood), Armenia is very vulnerable to climate and its change. Given the fact that 63 % of the entire land is planted with grains, this study primarily focuses on the market for wheat flour and bread. Economic welfare loss due to drought episodes is calculated using the economic data integrated with climate measures. Economic data are utilized for the period 1995–2011 (obtained from Statistical Office of Armenia) and specifically include the quantity produced and consumed of wheat flour and bread combined with mean prices, population income, GDP in the agricultural sector, GDP in the planting sector, and governmental expenditure on subsidies. Climate data include temperature and precipitation during the period 1966–2011 (obtained from National Hydrometeorological Service of Armenia). The analysis includes three main components. The first utilizes a market framework that analyzes the impact of climate on equilibrium prices and quantities as well as trade and tax effects. The second employs a logarithmic utility function to estimate the effective insurance policy for the agricultural sector using risk management strategies. Lastly, a macroeconomic model has been developed to assess the efficient sum of governmental expenditure on subsidies and irrigation during the drought episodes and during the mean climatic conditions. All three parts of the study are developed for the first time.     

The holocene dynamics of vegetation and environmental conditions on the eastern slope of the Northern Urals

Consideration is given to changes in the vegetation and climatic conditions on the eastern slope of the Northern Urals in the second half of the Holocene as reconstructed on the basis of integrated palynological, botanical, paleocarpological, and radiocarbon analysis of material from a peat bog section in the floodplain of the Loz’va River. The results show that the northern taiga zone of the study region in the period between approximately 5000 and 700 years BP was occupied by forests of southern taiga facies, as the climate was significantly warmer than it is today.     

The WTO,ecology, and Russia: The time to make decisions

The relationship between the principle of free trade and nature conservation is one of the most acute and multifaceted problems in international business. The diversity of WTO activities implies the necessity of interdisciplinary studies utilizing the expertise and experience of specialists in international law and ecologists. In this paper, provisions of the WTO set of agreements and procedures for dispute settlement within the WTO framework are considered as applied to environmental protection.     

Creosote DNAPL Recovery‐Well Design for Mass Removal

Sites with dense nonaqueous‐phase liquid (DNAPL) contamination present significant remediation challenges in terms of technical practicability and cost. Remedial approaches to DNAPL sites often follow a management approach rather than removal or eradication approaches, particularly due to the uncertainties associated with the benefits of partial source mass removal, as complete source removal is unlikely. Mass‐removal technologies should be evaluated for all DNAPL sites, although implementation of recovery technologies will be limited to a few sites based upon site‐specific factors. Sitewide remedial strategies that employ source reduction, where applicable, and incorporate associated risk‐reduction technologies, including monitored natural attenuation, are advised. Creosote DNAPL sites are particularly challenging, as they are predominantly composed of low‐solubility polycyclic aromatic hydrocarbons that form long‐term continuing sources. Additionally, the physical properties of creosote DNAPL, including high viscosity and relatively low density, result in significant migration potential and considerable dissolved‐phase groundwater impacts. An innovative creosote DNAPL source recovery well design was developed to achieve separate‐phase removal of pooled creosote DNAPL. The design presented herein employs modified circulation‐well technology to mobilize DNAPL to the engineered recovery well, where it is gravity‐settled into a sump to permit separate‐phase mass removal of the emplaced DNAPL source without groundwater production or treatment. A discharge mass flux protocol was developed to verify dissolved‐phase plume stability and the benefit of the source mass removal. © 2013 Wiley Periodicals, Inc.     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

Copper distribution in surface and subsurface soil horizons

The horizons of four natural soils were treated with Cu²⁺ in an acid medium to study the retention capacity of Cu. The possible mineralogical changes arising because of the treatment were also studied. The soil properties and characteristics with the greatest influence on the metal retention and its distribution among the different soil fractions were determined. Crystalline phases of each horizon were determined by X-ray diffraction (XDR). The morphology, structural distribution and particle chemical composition of soil samples were investigated using field emission scanning electron microscopy. Cu distribution in the different geochemical phases of the soil was studied using a sequential extraction. The treatment led to an increase in the amorphous phases and the formation of new crystalline phases, such as rouaite (Cu₂(NO₃)(OH)₃) and nitratine (NaNO₃). Cu was also found superficially sorbed on amorphous hydroxy compounds of Fe that interact with albite, muscovite and gibbsite, and also on spherical and curved particles of aluminium clays. The largest amount of Cu retained was in an exchangeable form, and the smallest amount associated with the crystalline Fe oxides and residual fraction. In the surface horizons, the predominant Cu retention process is complexation in organomineral associations, while in the subsurface horizons it is adsorption.