Traffic and catalytic converter - related atmospheric contamination in the metropolitan region of the city of Rio de Janeiro, Brazil

In this work, 24-h PM10 samples were collected in Rio de Janeiro, Brazil, and analysed for trace elements (Cd, Ce, Cu, La, Mo, Ni, Pb, Pd, Rh, Sb and Sn). The sampling was carried out at five locations (Bonsucesso; Centro, downtown city; Copacabana; Nova Igua?u and Sumaré) with different traffic densities and anthropogenic activities. An analytical method based on the EPA method for the determination of trace elements in airborne particulate matter (PM), using ultrasonic-assisted extraction and inductively coupled plasma mass spectrometry (ICP-MS) was applied. Our results suggest that vehicular traffic is the most important source of environmental pollution at the studied sites. The presence of Mo, Pd and Rh in the analysed filters reflects an additional source of pollution caused by the erosion and deterioration of automotive catalytic converters.     

Variation of MCPA, metribuzine, methyltriazine-amine and glyphosate degradation, sorption, mineralization and leaching in different soil horizons

Pesticide mineralization and sorption were determined in 75 soil samples from 15 individually drilled holes through the vadose zone along a 28 km long transect of the Danish outwash plain. Mineralization of the phenoxyacetic acid herbicide MCPA was high both in topsoils and in most subsoils, while metribuzine and methyltriazine-amine was always low. Organic matter and soil pH was shown to be responsible for sorption of MCPA and metribuzine in the topsoils. The sorption of methyltriazine-amine in topsoil was positively correlated with clay and negatively correlated with the pH of the soil. Sorption of glyphosate was tested also high in the subsoils. One-dimensional MACRO modeling of the concentration of MCPA, metribuzine and methyltriazine-amine at 2 m depth calculated that the average concentration of MCPA and methyltriazine-amine in the groundwater was below the administrative limit of 0.1 μg/l in all tested profiles while metribuzine always exceeded the 0.1 μg/l threshold value.     

Polycyclic aromatic hydrocarbon sampling in wastewaters using semipermeable membrane devices: accuracy of time-weighted average concentration estimations of truly dissolved compounds

Semipermeable membrane devices (SPMDs) previously spiked with performance reference compounds were exposed in wastewater. After 6 days of exposure, 13 polycyclic aromatic hydrocarbons (PAHs) were quantified in SPMDs. Exchange rate constants and time-weighted average (TWA) concentrations of SPMD-available PAHs in water were calculated. The bias of using SPMDs to estimate an actual TWA concentration if the concentration in water fluctuates, as can be expected in wastewater, was studied with numerical simulations. The bias increased with the exchange rate constant. However, most exchange rate constants evaluated in SPMDs exposed in wastewater were small enough for SPMDs to estimate a TWA concentration of PAHs even when the water concentration varied. TWA-SPMD-available concentrations were always below total dissolved (operationally defined as 0.7 microm) concentrations, indicating that part of the dissolved PAHs was not available for sampling. In situ partitioning coefficients K(DOC) were computed and found to be slightly higher than data from the literature. This confirms that only truly dissolved PAHs should be sampled by SPMDs in wastewater.     

Photodegradation of the steroid hormones 17beta-estradiol (E2) and 17alpha-ethinylestradiol (EE2) in dilute aqueous solution

The photochemical transformation of natural estrogenic steroid 17beta-estradiol (E2) and the synthetic oral contraceptive 17alpha-ethinylestradiol (EE2) has been studied in dilute non buffered aqueous solution (pH 5.5-6.0) upon monochromatic (254 nm) and polychromatic (lambda>290 nm) irradiation. Upon irradiation at 254 nm, the quantum yields of E2 and EE2 photolysis were similar and evaluated to be 0.067+/-0.007 and 0.062+/-0.007, respectively. Upon polychromatic excitation, and by using phenol as chemical actinometer, the photolysis efficiencies have been determined to be 0.07+/-0.01 and 0.08+/-0.01 for E2 and EE2, respectively. For both estrogens, photodegradation by-products were identified with GC/MS and LC/MS. In a first step, a model compound--5,6,7,8-tetrahydro-2-naphthol (THN)--, which represents the photoactive phenolic group, was used to obtain basic photoproduct structural informations. Numerous primary and secondary products were observed, corresponding to hydroxylated phenolic- or quinone-type compounds.     

Monitoring PCDD/Fs, PCBs and metals in the ambient air of an industrial area of Catalonia, Spain

In 2005 and 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and metals (As, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sn, Tl and V) were measured in air samples collected in an industrial area of Sant Adrià del Besòs (Barcelona, Catalonia, Spain) where a municipal solid waste incinerator (MSWI) is placed, and in a background/control area. In general terms, concentrations of all environmental pollutants were higher at the industrial site. No significant seasonal/temporal variations were observed in any of the areas. No Pearson correlation was found between the PCDD/F concentrations and the environmental conditions of the two sampling periods considered. Principal component analyses (PCA) were performed to get information on the relationship among samples, pollutants, and emission sources. The results indicate that the MSWI of S. Adrià de Besòs is not a significant emission source of the above compounds for the area under its direct influence. Moreover, a notable difference in the PCDD/F congener profiles was found between ambient air and stack gas emissions, indicating that the current levels of PCDD/Fs are more related to other potential emissions sources rather than to those from the MSWI.     

Species diversity variation of Cupressus funebris secondary forest in landslide site after 5.12 Wenchuan Earthquake北大核心CSCD

The characteristics of species diversity in Cupressus funebris secondary forest under the effect of geological hazard were explored by selecting the typical landslide surface of Fenghuang Mountain, Leigu Town, Beichuan County, which was derived from the 5.12 Wenchuan earthquake. The results showed that 93 species belonged to 42 families, and 78 genera were found in the landslide area, where the main families were Compositae, Leguminosae, and Gramineae-based. Further, 97 species in the transition area belonged to 39 families and 80 genera, and the main families were Compositae, Gramineae, and Rosaceae-based. In all, 108 species were recorded in the non-landslide area, which belonged to 59 families and 92 genera, the main families of which were Compositae, Rosaceae, and Gramineae-based. Compositae and Gramineae played important roles in the landslide recovery process after earthquake. The Pielou index (JSW) was the highest in the non-landslide area of the herb layer, whereas the richness index (D) was the lowest; the Shannon-Wiener index (H) and Simpson index (H') showed medium values. In the non-landslide area, the D, H, and H' were the highest in the shrub layer, whereas the JSW was the lowest. Further, the species diversity index of the transitional area was higher than that of the landslide area. In the tree layer, the D and H were both the highest and lowest in the landslide area and transition area, respectively. In contrast, the H' and JSW were the highest in the transition area and the lowest in the non-landslide area. The distribution of vegetation was generally consistent with the distribution of soil nutrients in the spatial distribution of surface soil nutrients. The succession of trees in the landslide area was relatively slow and at the initial stage, and the pioneer species were Coriaria nepalensis, Leptopus chinensis, and Arthraxon lanceolatus in this area. Taken together, the findings suggested that the stability of a plant community can be increased by improving the soil and stabilizing the slope. © 2018 Science Press. All rights reserved.     

Tolerance of the black soldier fly,Hermetia illucens (Diptera: Stratiomyidae) to pH value,pungency, and NaCl in foodstuffs北大核心CSCD

The black soldier fly (BSF), Hermetia illucens, has been considered impressive as a saprophagous insect, for its high ability to convert organic waste to insect protein and oil. Hence, it has been regarded by the municipal administration that BSF might be used as a medium to deal with food waste. However, food waste in China has been characterized as having a high salt content, oily, and very spicy, which usually renders them unsuitable for animal feeding. In order to assess the technological reliability for BSF conversion of food waste, the tolerance of BSF for pH values, pungency, and NaCl in food were investigated in this case. Results indicated that strong acidity (pH = 3) was not good for the development of BSF, demonstrating less body weight and eclosion failure. In contrast, strong basicity (pH = 11) seemed to be beneficial for larval development with high biomass, and there is no difference in pupation, eclosion, larval biomass, and livability for BSF for pH values between 5 and 11. With regards to salinity, liner correlations were observed; the salinity strength increased along with the extension of the larval phase, but body weight, pupation rate, emerging rate, and livability were still consistent under 6% density of salinity. Influence of pungency on BSF larvae has not yet been found. In conclusion, BSF showed a high tolerance to pH value, pungency, and salinity in foodstuffs. Hence, it is expected that food waste from common environments might have a lesser possibility to cause negative effects on BSF development, which could be good news for BSF conversion technology. As for the process design, the conclusion suggested that food waste optimum for BSF is expected to be alkaline and low-salt, which would be helpful to improve the efficiency and harvest. © 2018 Science Press. All rights reserved.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

The interaction of heat shock proteins and some components of plant viruses北大核心CSCD

Considerable research has indicated that heat shock proteins (Hsp), as molecular chaperones, carry out many biological activities of plant viruses by folding, transporting, translocating, assembling, or degrading client proteins. It is fundamental to develop resistant plant varieties and novel anti-viral agents by determining the interaction mechanisms between plant viruses and hosts. In this study, we first reviewed the classification, gene and protein structure, and biological significances. We then analyzed the assembling mechanism of Hsp70 or Hsp90, plant host cofactors, and RNA-dependent RNA polymerases in a viral replicase complex, and the mechanism of interaction and subcellular localization between Hsp70 and some plant virus components. We highlighted the mechanism of interaction and movement between Hsp70 and some plant virus components and the effect of Hsp expression of plant hosts or viruses. The results indicated where the mechanism occurred, the participating factors, energy supply, and material conversion between Hsps and the plant virus components for the course of the intracellular movement, local movement between cells, and long-distance movement, and showed the Hsp type specificity and the law of dynamic Hsp expression in plant hosts infected by viruses. The studies mainly focused on the two Hsp factors and the plant viral components, indicating limited coordination mechanisms among many nucleic acids, proteins, and polysaccharides in macromolecular protein complexes (MRC). Future research should analyze the translocation mechanism between client proteins and Hsps, the coordination mechanism between Hsps and MRC components, and the relation between MRC and the plant tissue structure. © 2018 Science Press. All rights reserved.     

Using the expert model PERPEST to translate measured and predicted pesticide exposure data into ecological risks

An important topic in the registration of pesticides and the interpretation of monitoring data is the estimation of the consequences of a certain concentration of a pesticide for the ecology of aquatic ecosystems. Solving these problems requires predictions of the expected response of the ecosystem to chemical stress. Up until now, a dominant approach to come up with such a prediction is the use of simulation models or safety factors. The disadvantage of the use of safety factors is a crude method that does not provide any insight into the concentration–response relationships at the ecosystem level. On the other hand, simulation models also have serious drawbacks like that they are often very complex, lack transparency, their implementation is expensive and there may be a compilation of errors, due to uncertainties in parameters and processes. In this paper, we present the expert model prediction of the ecological risks of pesticides (PERPEST) that overcomes these problems. It predicts the effects of a given concentration of a pesticide based on the outcome of already performed experiments using experimental ecosystems. This has the great advantage that the outcome is more realistic. The paper especially discusses how this model can be used to translate measured and predicted concentrations of pesticides into ecological risks, by taking data on measured and predicted concentrations of atrazine as an example. It is argued that this model can be of great use to evaluate the outcome of chemical monitoring programmes (e.g. performed in the light of the Water Framework Directive) and can even be used to evaluate the effects of mixtures.