The importance of the location of sodium chlorite application in a multipollutant flue gas cleaning system

In this study, removing sulfur dioxide (SO2), nitrogen oxides (NO(x)), and mercury (Hg) from simulated flue gas was investigated in two laboratory-sized bubbling reactors that simulated an oxidizing reactor (where the NO and Hg(0) oxidation reactions are expected to occur) and a wet limestone scrubber, respectively. A sodium chlorite solution was used as the oxidizing agent. The sodium chlorite solution was an effective additive that enhanced the NO(x), Hg, and SO2 capture from the flue gas. Furthermore, it was discovered that the location of the sodium chlorite application (before, in, or after the wet scrubber) greatly influences which pollutants are removed and the amount removed. This effect is related to the chemical conditions (pH, absence/presence of particular gases) that are present at different positions throughout the flue gas cleaning system profile. The research results indicated that there is a potential to achieve nearly zero SO2, NO(x), and Hg emissions (complete SO2, NO, and Hg removals and -90% of NO(x) absorption from initial values of 1500 ppmv of SO2, 200 ppmv of NO(x), and 206 microg/m3 of Hg(0)) from the flue gas when sodium chlorite was applied before the wet limestone scrubber. However applying the oxidizer after the wet limestone scrubber was the most effective configuration for Hg and NO(x) control for extremely low chlorite concentrations (below 0.002 M) and therefore appears to be the best configuration for Hg control or as an additional step in NO(x) recleaning (after other NO(x) control facilities). The multipollutant scrubber, into which the chlorite was injected simultaneously with the calcium carbonate slurry, appeared to be the least expensive solution (when consider only capital cost), but exhibited the lowest NO(x) absorption at -50%. The bench-scale test results presented can be used to develop performance predictions for a full- or pilot-scale multipollutant flue gas cleaning system equipped with wet flue gas desulfurization scrubber.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

Trace level determination of selected sulfonylurea herbicides in wetland sediment by liquid chromatography electrospray tandem mass spectrometry

Sulfonylurea herbicides are widely used in crop production on the Canadian prairies and a portion of these herbicides applied to cropland are inevitably lost to surrounding aquatic ecosystems. Little is known regarding the presence of sulfonylurea herbicides in wetlands located amongst cropland. This paper describes a new analytical method for the extraction and the determination of seven sulfonylurea herbicides (thifensulfuron-methyl, tribenuron-methyl, ethametsulfuron-methyl, metsulfuron-methyl, rimsulfuron, nicosulfuron and sulfosulfuron) in wetland sediment. The method provided > 85% analyte recovery from fortified sediment for six of the seven sulfonylurea herbicides with a limit of quantification (LOQ) of 1.0 μ g kg^{? 1}. Tribenuron-methyl had significantly lower recovery compared to the other six sulfonylurea herbicides (LOQ = 2 μ g kg^{? 1}). Mean recovery standard deviations were < 10%. This methodology was used to quantify sulfonylurea herbicide residues in sediment samples collected from prairie wetlands situated within the agricultural landscape of Saskatchewan and Manitoba, Canada. This is the first-known detection of sulfonylurea herbicide residues in prairie wetland sediments. Ethametsulfuron-methyl, sulfosulfuron and metsulfuron-methyl, the three most environmentally persistent of the seven sulfonylurea herbicides monitored in the surveillance component of this study, were most frequently detected in wetland sediment with mean concentrations ranging from 1.2 to 10 μ g kg^{? 1}.     

Characterization of Atrazine-Loaded Biodegradable Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Microspheres

Polyhydroxybutyrate-co-hydroxyvalerate microspheres (PHBV-MS) were prepared as a delivery system for the herbicide atrazine (ATZ). Characterization of the system included investigation of in vitro release properties and genotoxicity. ATZ − PHBV-MS particle diameters showed a size distribution range of 1–13 μm. Differential scanning calorimetry analyses indicated that ATZ was associated with the PHBV microparticles. The release profiles showed a different release behavior for the pure herbicide in solution, as compared with that containing ATZ-loaded PHBV-MS. Korsmeyer–Peppas model analyses showed that atrazine release from the microparticles occurred by a combination of diffusion through the matrix and partial diffusion through water-filled pores of the PHBV microparticles. A Lactuca sativa test result showed that the genotoxicity of ATZ-loaded PHBV-MP was decreased in relation to ATZ alone. The results demonstrate a viable biodegradable herbicide release system using atrazine for agrochemical purposes.     

Shared ways of thinking in Brazil about the science–practice interface in ecology and conservation

The debate in the literature on the science–practice interface suggests a diversity of opinions on how to link science and practice to improve conservation. Understanding this diversity is key to addressing unequal power relations, avoiding the consideration of only dominant views, and identifying strategies to link science and practice. In turn, linking science and practice should promote conservation decisions that are socially robust and scientifically informed. To identify and describe the viewpoints of scientists and decision makers on how the science–practice interface should work in order to improve conservation decisions, we interviewed Brazilian scientists (ecologists and conservation scientists, n = 11) and decision makers (n = 11). We used Q methodology and asked participants to rank their agreement with 48 statements on how the science–practice interface should work in order to improve conservation decisions. We used principal component analysis to identify shared viewpoints. The predominant viewpoint, shared by scientists and decision makers, was characterized by valuing the integration of scientific and strategic knowledge to address environmental problems. The second viewpoint, held mostly by decision makers, was distinguished by assigning great importance to science in the decision-making process and calling for problem-relevant research. The third viewpoint, shared only by scientists, was characterized by an unwillingness to collaborate and a perception of scientists as producers of knowledge that may help decision makers. Most participants agreed organizations should promote collaboration and that actors and knowledge from both science and practice are relevant. Disagreements concerned specific roles assigned to actors, willingness to collaborate, and organizational and institutional arrangements considered effective to link science and practice. Our results suggest there is ample room for collaborations and that impediments lie mainly in existing organizations and formal institutional arrangements rather than in negative attitudes between scientists and decision makers.     

Microscale Toxicity Identification Evaluation (TIE) for interstitial water of estuarine sediments affected by multiple sources of pollution

Estuaries in the world are affected by different contamination sources related to urbanisation and port/industrial activities. Identifying the substances responsible for the environmental toxicity in estuaries is challenging due to the multitude of stressors, both natural and anthropogenic. The Toxicity Identification and Evaluation (TIE) is a suitable way of determining causes of toxicity of sediments, but it poses difficulties since its application is labour intensive and time consuming. The aim of this study is to evaluate the diagnosis provided by a TIE based on microscale embryotoxicity tests with interstitial water (IW) to identify toxicants in estuarine sediments affected by multiple stressors. TIE showed toxicity due to different combinations of metals, apolar organic compounds, ammonia and sulphides, depending on the contamination source closest to the sampling station. The microscale TIE was able to discern different toxicants on sites subject to different contamination sources. There is good agreement between the results indicated in the TIE and the chemical analyses in whole sediment, although there are some disagreements, either due to the sensitivity of the test used, or due to the particularities of the use of interstitial water to assess the sediment toxicity. The improvement of TIE methods focused on identifying toxicants in multiple-stressed estuarine areas are crucial to discern contamination sources and subsidise management strategies.

     

Investigation on air quality of specific indoor environments—spa salons located in Gdynia,Poland

Environmental Science and Pollution Research - Due to excessive application of essential oils and scented products in spa salons during aromatherapy and massage sessions, the elevated concentration...