Large scale remote sensing for environmental monitoring of infrastructure

Recent developments in wireless sensor technology afford the opportunity to rapidly and easily deploy large-scale, low-cost, and low-power sensor networks across relatively sizeable environmental regions. Furthermore, the advancement of increasingly smaller and less expensive wireless hardware is further complemented by the rapid development of open-source software components. These software protocols allow for interfacing with the hardware to program and configure the onboard processing and communication settings. In general, a wireless sensor network topology consists of an array of microprocessor boards, referred to as motes, which can engage in two-way communication among each other as well as with a base station that relays the mote data to a host computer. The information can then be either logged and displayed on the local host or directed to an http server for network monitoring remote from the site. A number of wireless sensor products are available that offer off-the-shelf network hardware as well as sensor solutions for environmental monitoring that are compatible with the TinyOS open-source software platform. This paper presents an introduction to wireless sensing and to the use of external antennas for increasing the antenna radiation intensity and shaping signal directivity for monitoring applications requiring larger mote-to-mote communication distances.     

Assessment of volatile organic compound removal by indoor plants—a novel experimental setup

Indoor plants can remove volatile organic compounds (VOCs) from the air. The majority of knowledge comes from laboratory studies where results cannot directly be transferred to real-life settings. The aim of this study was to develop an experimental test system to assess VOC removal by indoor plants which allows for an improved real-life simulation. Parameters such as relative humidity, air exchange rate and VOC concentration are controlled and can be varied to simulate different real-life settings. For example, toluene diffusion through a needle gave concentrations in the range of 0.10–2.35 μg/L with deviations from theoretical values of 3.2–10.5 %. Overall, the system proved to be functional for the assessment of VOC removal by indoor plants with Hedera helix reaching a toluene removal rate of up to 66.5 μg/m²/h. The mode of toluene exposure (semi-dynamic or dynamic) had a significant influence on the removal rate obtained by H. helix.     

Polyfluorinated compounds in the atmosphere along a cruise pathway from the Japan Sea to the Arctic Ocean

Neutral polyfluorinated alkyl substances (PFASs) were measured in high-volume air samples collected on board the research vessel Snow Dragon during the 4th Chinese National Arctic Expedition from the Japan Sea to the Arctic Ocean in 2010. Four volatile and semi-volatile PFASs (fluorotelomer alcohols (FTOHs), fluorotelomer acids (FTAs), perfluoroalkyl sulfonamides (FASAs), and sulfonamidoethanols (FASEs)) were analyzed respectively in the gas and particle phases. FTOHs were the dominant PFASs in the gas phase (61-358 pg m⁻³), followed by FTAs (5.2-47.9 pg m⁻³), FASEs (1.9-15.0 pg m⁻³), and FASAs (0.5-2.1 pg m⁻³). In the particle phase, the dominant PFAS class was FTOHs (1.0-9.9 pg m⁻³). The particle-associated fraction followed the general trend of FASEs > FASAs > FTOHs. Compared with other atmospheric PFAS measurements, the ranges of concentrations of ∑FTOH in this study were similar to those reported from Toronto, north America (urban), the northeast Atlantic Ocean, and northern Germany. Significant correlations between FASEs in the gas phase and ambient air temperature indicate that cold surfaces such as sea-ice, snowpack, and surface seawater influence atmospheric FASEs.     

5,000 year-old spermatozoa in Quaternary Ostracoda (Crustacea)

Fossil spermatozoa are recorded for the first time in freshwater ostracods (small bivalved crustaceans) from Holocene sediments at sites in the United Kingdom and Germany. Exceptional conditions at these sites have resulted in the preservation of chitinous "soft parts", including limbs, the remains of Zenker's Organs (sperm pumps that are part of the male reproductive apparatus in cypridoidean ostracods) and spermatozoa from eight different species. Comparisons are made with spermatozoa from living ostracods and the implications of these discoveries for evolutionary studies of reproductive modes are discussed.     

Metallakkumulation in Moosen: Standörtliche und regionale Randbedingungen des Biomonitoring von Luftverunreinigungen

Goal and Scope

Several studies show that the concentration of metals in mosses depends not only on metal deposition but also on factors such as moss species, canopy drip, precipitation, altitude, distance to the sea and the analytical technique used. However, contrasting results have been reported and the interpretation of the spatial variability of the metal accumulation in mosses remains difficult. In the presented study existing monitoring data from the European Heavy Metals in Mosses Surveys together with surface data on precipitation, elevation and land use are statistically analysed to assess factors other than emissions that have an influence on the metal accumulation in the mosses.

Main Features

Inference statistics and Spearman correlation analysis were applied to examine the association of the metal accumulation and the distance of the monitoring sites to the sea as well as the altitude. Whether or not significant differences of the metal loads in the mosses exist at national borders was examined with help of the U-test after Mann and Whitney. In order to identify and rank the factors that are assumed to have an influence on the metal uptake of the mosses Classification and Regression Trees (CART) were applied.

Results

No clear tendency could be derived from the results of the inference statistical calculations and the correlation analyses with regard to the distance of the monitoring site to the sea and the altitude. According to the results of the CART-analyses mainly the moss species, potential emission sources around the monitoring sites, canopy drip and precipitation have an effect on the metal bioaccumulation. Assuming that each participating country followed strictly the manual for sampling and sample preparation the results of the inference statistical calculations furthermore suggest that in most cases different techniques for digestion and analysis bias the measurements significantly.

Discussion

For the first time a national monitoring data base consisting of measurement data and metadata as well as surface information on precipitation, land use and elevation was applied to examine influence factors on the metal bioaccumulation in mosses. The respective results mirror existing knowledge from other national studies to a large extend, although further analyses are necessary to affirm the findings. These analyses should include data from other national monitoring programmes and should additionally be carried out with other decision tree algorithms than CART.

Conclusions

The local variability in the metal concentration in mosses can be uncovered in terms of predictors or underlying hidden causes by using CART. Ideally, such an approach should be applied across the whole of Europe. This will only be feasible if all participating countries provide additional information about site characteristics as currently is done in for example the German moss surveys.

Recommendations

The UNECE Metals in Mosses Survey experimental protocol should be improved in order to reduce the observed influences, to enhance standardisation, and to strengthen the quality control. This implies the integration of sampling site describing metadata into the assessment. Furthermore, basis research is needed to test the hypothesis concerning moss species-specific accumulation of depositions.

Perspectives

Provided that the presented results hold true in further analyses correction factors should be applied on the moss data in order to get the depicted spatial patterns and temporal trends of metal bioaccumulation unbiased. Such factors should be calculated for natural landscape units or ecoregions that are homogeneous with regard to climate, vegetation and altitude.     

Do birds behave according to dynamic risk assessment theory? A feeder experiment

Pair-wise preference experiments were used to reveal predator discrimination by four tit species wintering in the Czech Republic. The reactions of the tits to a more dangerous predator (sparrowhawk) and a less dangerous (kestrel) one were compared. The number of visits to a feeder with a predator present expressed the perceived dangerousness of the predator. The tits' behaviour towards the feeders was in agreement with predictions, according to dynamic risk assessment theory. The presence of any predator at the feeder lowered the number of visits to the feeder. Similarly, the tits were judged to have evaluated the sparrowhawk as being more dangerous than the kestrel, as its presence lowered the number of arrivals more than did the kestrel. The duration of stay and number of pecks of individual birds were also used as measures of predator dangerousness. The results not only confirm that tits behave according to dynamic risk assessment theory, but also show the exceptional suitability of preference experiments for the research of predator differentiation and evaluation.     

Neue Aspekte in der Behandlung von Siedlungsabflüssen

The surface runoff from urban areas is one of the most important sources of pollutants emitted into surface waters. Suspended solids which act as a transport vehicle for many anthropogenic pollutants (e.?g. heavy metals, PAH) are a key factor in this regard. The development of efficient measures of storm water runoff treatment thus requires a further differentiation of suspended solids in a fine (clay and silt) and coarse (sand and gravel) fraction. Both fractions show distinctly different characteristics in pollutant loading, transport and retention on urban surfaces and sewer systems. The primary aim of storm water runoff treatment is the reduction of the fine particles which are always highly loaded with anthropogenic pollutants. In contrast the coarse particles are almost unpolluted especially if they have a low organic share. The widespread sedimentation tanks with surface loadings between 10 and 2?m/h are very inefficient. A significant, save and lasting reduction of the emitted load of fine particles requires a considerable reduction of the surface loads. That can be achieved with the installation of lamellar settler or the utilization of the very large volumes of flood management tanks frequently present in urban areas. Filtration plants are highly efficient but there application in urban areas is limited due to their high space demands.