Screening Technology Trains for DNAPL Remediation

The Department of Energy (DOE) is conducting a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) mandated Remedial Investigation/Feasibility Study for a site contaminated with Dense Non-Aqueous Phase Liquid (DNAPL) pollutants. Three key efforts were a hydrogeological modeling approach, the generation of feasible sequences of technologies, and the screening of alternative technologies. This research uses a decision analysis process to provide a quantitative assessment of the candidate technologies. Decision analysis modeling was used to gain insight into each sequence of technologies. Sensitivity analysis was also conducted to assess the impact of key assumptions. The results provided the DOE with an objective and traceable rationale for screening and reducing all of the potential technology combinations to 58 technology combinations and a method for identifying the top scoring combinations. The approach has wide applicability to similar CERCLA remediation efforts.     

What's the difference between reengineering and tqem?

Reengineering has become the latest corporate management buzzword, replacing, in many cases, total quality management as the panacea for industrial ills. How different are reengineering and total quality management (TQM), if at all, and how does each apply to environmental management? In this article the authors examine the concepts of reengineering and TQM as they apply to environmental management.     

Release of nitrogen and trace metal species from field stacked biosolids

Concerns over elevated nitrate (NO3-) levels found in groundwater near former biosolid stockpiling locations resulted in the Maine Department of Environmental Protection (MDEP) imposing stricter regulations governing the stockpiling of biosolids in October 2002. The goals of this study were to measure the amount and speciation of nitrogen (N) and trace metals leaving stockpiled biosolids and travelling through the soil column. The biosolids were placed on plastic-lined cells to collect all leachate. Ammonium (NH4+), ranging from 2000 to 4900 mg L(-1), was the dominant N species (90% of total N) in the leachate from the Class B lime-stabilized biosolids in the lined cell experiment. Nitrate (NO3-) and nitrite (NO2-) concentrations were negligible, remaining below 0.25 and 0.1 mg L(-1), respectively. Dissolved organic carbon (DOC) concentrations as high as 8900 mg L(-1) and chemical oxygen demand (COD) as high as 37 000 mg L(-1) were measured in the leachate leaving the lined cell. Fifteen zero-tension pan lysimeters (ZTP-lysimeter) were installed in a 90 m2 plot at depth intervals of 30, 60, and 100 cm. Leachate passing through the soil column underlying the biosolids stockpile was collected in the ZTP-lysimeters. The average ZTP-lysimeter NH4+ concentrations ranged from 1400 mg L(-1) at 60 cm depth to 145 mg L(-1) at 90 cm depth. The average ZTP-lysimeter DOC concentrations ranged from 2000 mg L(-1) at 60 cm to 525 mg L(-1) at 90 cm. Trace metal determinations of the leachate collected from the lined cell and ZTP-lysimeters showed arsenic loading rates exceeded the state limits of 0.5 kg ha(-1) year(-1) by an order of magnitude. Arsenic concentrations were in excess of several thousand milligrams per litre in the lined-cell leachate and several hundred milligrams per litre in the ZTP-lysimeters as deep as 90 cm under the biosolid stockpile. Phosphorus, iron and manganese in excess of several thousand milligrams per litre were observed in both the lined-cell leachate and ZTP-lysimeters. Significant concentrations of other trace metals were found at depth in the zero-tension ZTP-lysimeter plot. Trace metals were largely mobilized by the DOC from the biosolids and due to the presence of anaerobic environment, especially in the underlying soil.     

Material flow accounting in an Irish city-region 1992–2002

This paper aims to measure raw material inputs and waste flows in an Irish city-region in order to analyse (i) whether there was absolute dematerialisation in the particular case study over the period 1992–2002 and (ii) whether material consumption and waste generation were decoupled from economic growth and increases in disposable income over the same period. It was found that the selected material flow indicators showed no evidence of absolute dematerialisation over the given study period, although more recent evidence at the national level suggests that a decline in construction activity and extraction of non-metallic minerals has resulted in an absolute reduction in material consumption and it is likely that this will be mirrored at the system boundary level.It was found that Domestic Material Consumption (DMC) per capita and Direct Material Input (DMI) per capita increased at a faster rate than Domestic Processed Output (DPO) per capita and Direct Material Output (DMO) per capita between 1992 and 2002, which indicates relative decoupling of consumption from waste generation. In addition, it was found that there was relative decoupling of consumption and waste generation from disposable income growth over the study period. Finally, it was found that average DMC and DMI figures for the selected case study were lower than the national averages but broadly similar to results for other city-regions in the European Union (EU). On a methodological note, it was concluded that material flow accounting (MFA) for city-regions in Ireland is constrained due to a lack of disaggregated data for material flows, with the exception of local waste data, and it is recommended that bottom-up analysis should be used to complement disaggregated top-down data.