Nitrification and denitrification rates of Everglades wetland soils along a phosphorus-impacted gradient

Little information is available on the effect of phosphorus (P) enrichment on nitrogen (N) biogeochemical cycling in wetland soil. Of particular importance are the coupled nitrification-denitrification reactions that regulate the microbially mediated loss of N from wetland systems. Soils from the northern Florida Everglades have been affected by P loading from surface waters over the past 40 years. Elevated P levels have been show to have an effect on the size and activity of the microbial pool and a decrease in the N to P ratio of the microbial biomass. The objective of the study was to determine if P enrichment in soils affected microbial activities related to nitrification and denitrification in these flooded, peat soils. Potential nitrification rates of soil and detritus were determined using constantly stirred reactors under aerobic conditions while denitrification rates were determined from anaerobic incubations of slurry. Nitrification rates showed two distinct linear phases, a slower initial rate, signifying activity of nitrifiers present, followed by a sharp increase in the NH4+ conversion rate indicative of maximum potential rates. Initial rates of nitrification were highest in the surficial detrital layer decreasing with soil depth and did not correlate to soil total P. The potential rates of nitrification were 13 times greater than the initial rates. Potential denitrification rates were highest in the detritus and 0- to 10-cm soil interval with significantly lower values in the 10- to 30-cm soil interval, significantly correlated to total P of the soil. A significant (P < 0.01) relationship was seen between potential denitrification rates and soil total P suggesting an increased rate of N removal from P-enriched regions of the northern Everglades.     

Influence of form and quantity of selenium on the development and survival of an insect herbivore

Even plants classified as 'nonaccumulators' can sequester concentrations of sodium selenate, sodium selenite, selenocystine and selenomethionine that can strongly influence insect development and survival. These forms of selenium (Se), tested in diet-incorporation bioassays, proved toxic to larvae of a generalist insect herbivore at relatively low levels. Sodium selenite was the most toxic form tested against Spodoptera exigua (Hübner), with an LC(50) of 9.14 microg g(-1) wet wt (21.11 microg g(-1) dry wt). Selenocystine was intermediate with an LC(50) of 15.2 microg g(-1) wet wt. The least toxic forms, sodium selenate and selenomethionine, had LC(50)s below 50 microg g(-1) dry wt, the upper level for tissues of plants classified as nonaccumulators. Ingestion of some forms of Se also affected growth and development. Increasing concentrations of sodium selenate and sodium selenite decreased pupal weight and added significantly to the time needed for development to the pupal and adult stages. The time required to complete the larval stage increased by over 25% and the time from egg to adult emergence was extended by 22% to nearly 30%. Selenocystine and selenomethionine did not significantly increase developmental times, even at concentrations that killed 90% or more of the test populations. Analyses of relative growth rate, relative growth index, and an analysis of covariance technique for measuring growth indicated that the form of Se affected growth rates, growth inhibition responses of the larvae, and toxicological effects. Thus, quantity and the form of Se accumulating in plants grown on Se-contaminated sites are likely to influence the population dynamics of insect herbivores. The implications of these results for the ecology of contaminated sites are discussed.     

Biodegradation of an Epoxy-Based Thermoplastic Polyester, Poly(Hydroxy Ester Ether) in a Laboratory-Scale Compost System

An epoxy-based thermoplastic polyester, poly(hydroxy ester ether), was incubated under aerobic conditions in a laboratory-scale compost system for 168 days to evaluate its potential for biodegradation. Radiolabeled test polymer [uniformly ¹⁴C ring-labeled, poly(hydroxy ester ether)] was incorporated into a mature compost and a sludge-amended compost at a loading of 3 mg test polymer/g compost. ¹⁴C-Cellulose was used as the positive control and a biologically inhibited control reactor was used to assess abiotic degradation of the test polymer. Degradation of the test polymer was assessed by measuring the amount of ¹⁴C-CO₂ from each of the test reactors. In addition, at selected time intervals subsamples of the compost were collected and serially extracted with water, methanol, and dimethylformamide to monitor degradation of the ¹⁴C-test polymer and provide a partial characterization of the degradation intermediates. Extensive degradation of ¹⁴C-poly(hydroxy ester ether) was observed in the test reactors with degradation half-life of the parent polymer (t _1/2) of approximately 32 days. By the end of the study, only 2% of the total ¹⁴C activity in the test reactors was attributed to intact polymer, with most of the measurable ¹⁴C activity converted to either ¹⁴C-CO₂ (26% of total ¹⁴C activity) or nonextractable products (accounting for 60% of the total activity). In contrast to the test reactors, only 3% of the ¹⁴C-poly(hydroxy ester ether) added to the biologically inhibited control reactor was mineralized to ¹⁴C-CO₂. The results obtained from the microbially active and biologically inhibited compost systems indicate that the poly(hydroxy ester ether) polymer was degraded, at least in part, by a biologically mediated process.     

Environmental management in an international consumer goods company

Many management processes and tools can provide companies with information to support their environmental decision making. Risk assessment, environmental auditing, life cycle assessment and environmental reporting are but a few examples. Each of these has typically evolved independently as the need for it has arisen. Today, however, this abundance of tools can lead to confusion: What is the exact objective of each tool? How do they differ? Are some ‘better’ than others? Should they be used in parallel, sequentially or in place of each other? More importantly, how do they fit together into a coherent environmental management framework that will ensure sound environmental and economic decision making in a company? This paper seeks to answer these questions. It describes the overall environmental framework that has been developed internally within Procter & Gamble and which allows the company to make coherent economically and environmentally sound decisions, in both the short- and long-term.     

REGIONAL RAINFALL INTENSITY-DURATION-FREQUENCY CURVES FOR PENNSYLVANIA1

ABSTRACT: A statistical analysis of all available continuous hourly and 15-minute duration rainfall records for Pennsylvania was performed to develop an updated procedure to estimate design storms. As a resuit of this study, Pennsylvania was divided into five homogeneous rainfall regions and a set of rainfall intensity-duration curves developed for each region, for return periods of 1 to 100 years and durations ranging from 5 minutes to 24 hours. The PDT-IDF curves were judged to be a better representation of Pennsylvania rainfall than the nationwide TP-40 maps, particularly for storm events of 10-years and lower return periods. The average time distribution of 24-hour storms in Pennsylvania was found to be well represented by the SCS Type II distribution. The Corps of Engineers SPS 24-hour distribution was found to differ appreciably from both the SCS Type H and the Pennsylvania 24-hour storm distribution. For storm durations between 15 and 90 minutes the standard Yarnell intensity-duration curves closely resemble Pennsylvania storm distributions.     

Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California

Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced inCalifornia. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables.Results from the five urban areas – Porterville, Fresno, Rancho Cordova, Brentwood and Chico – showed there were no significanthuman exposures or impacts on the environment. Spray tank concentrations ranged from 0.1–0.32%. Carbaryl concentrationsin air ranged from none detected to 1.12 g m^-3, well below the interim health screening level in air of 51.7 g m^-3. There were three detections of carbaryl in surface water nearapplication sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppbin a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54–7.12 g cm^-2, comparable to levels reported forsafe reentry of 2.4 to 5.6 g cm^-2 for citrus. Carbarylconcentrations in fruits and vegetables ranged from no detectableamounts to 7.56 ppm, which were below the U.S.EPA tolerance, allowable residue of 10 ppm.     

Statistical comparison of heavy metal concentrations in various louisiana sediments

The use of statistical t tests were used to determine lead, zinc, and cadmium enrichment in various Louisiana sediments. Both absolute metal concentrations and trace metal/conservative metal concentration ratios were used in comparing sampled sites to a 110 m deep background core taken just off the mouth of the Mississippi River. Concentration ratios were used to reduce the effects of certain chemical and physical sediment characteristics on the quantity of metal contained in a given sediment.Results from the comparison of sample sites to the background reveal metal enrichment at several sites. The University Lake sampling sites exhibit both lead and zinc enrichment when using both the concentration alone and ratio methods of comparison. Additionally, cadmium enrichment is indicated in the sediments of University Lake when using only the ratio method of comparison. Several sampled sediments in and around the New Orleans metropolitan area exhibited lead and cadmium enrichment.     

ART in‐well technology proves effective in treating 1,4‐dioxane contamination

A common industrial solvent additive is 1,4‐dioxane. Contamination of dissolved 1,4‐dioxane in groundwater has been found to be recalcitrant to removal by conventional, low‐cost remedial technologies. Only costly labor and energy‐intensive pump‐and‐treat remedial options have been shown to be effective remedies. However, the capital and extended operation and maintenance costs render pump‐and‐treat technologies economically unfeasible at many sites. Furthermore, pump‐and‐treat approaches at remediation sites have frequently been proven over time to merely achieve containment rather than site closure. A major manufacturer in North Carolina was faced with the challenge of cleaning up 1,4‐dioxane and volatile organic compound–impacted soil and groundwater at its site. Significant costs associated with the application of conventional approaches to treating 1,4‐dioxane in groundwater led to an alternative analysis of emerging technologies. As a result of the success of the Accelerated Remediation Technologies, LLC (ART) In‐Well Technology at other sites impacted with recalcitrant compounds such as methyl tertiarybutyl ether, and the demonstrated success of efficient mass removal, an ART pilot test was conducted. The ART Technology combines in situ air stripping, air sparging, soil vapor extraction, enhanced bioremediation/oxidation, and dynamic subsurface groundwater circulation. Monitoring results from the pilot test show that 1,4‐dioxane concentrations were reduced by up to 90 percent in monitoring wells within 90 days. The removal rate of chlorinated compounds from one ART well exceeded the removal achieved by the multipoint soil vapor extraction/air sparging system by more than 80 times. © 2005 Wiley Periodicals, Inc.