Kinetics of chemoheterotrophic microbially mediated reduction of ferric EDTA and the nitrosyl adduct of ferrous EDTA for the treatment and regeneration of spent nitric oxide scrubber liquor.

Biomass from a prototype reactor was used to investigate the kinetics of chemoheterotrophic reduction of solutions of ferric ethylenediaminetetraacetic acid (EDTA) and solutions containing the nitrosyl adduct of ferrous EDTA using ethanol as the primary electron donor and carbon source. A series of batch experiments were conducted using biomass extracted from the scrubber solution treatment and regeneration stage of a prototype iron EDTA-based unit process for the absorption of nitric oxide with subsequent biological treatment. Using a linear-sweep voltammetric method for analysis of the ferric EDTA concentration, iron-reducing bacteria were found to behave according to the Monod kinetic model, at initial concentrations up to 2.16 g chemical oxygen demand (COD) as ethanol per liter, with a half-velocity constant of 0.532 g COD as ethanol/L and a maximum specific utilization rate of 0.127 mol/L of ferric ethylenediamine-tetraacetic acid [Fe(III)EDTA]*(g volatile suspended solids [VSS]/L)d(-1). Based on batch analyses, biomass yield and endogenous decay values of iron-reducing bacteria were estimated to be 0.055 g VSS/g COD and 0.017 L/d, respectively. An average of 1.64 times the theoretical (stoichiometric) demand of ethanol was used to complete reduction reactions. Kinetics of the reduction of the nitrosyl adduct of ferrous EDTA are summarized by the following kinetic constants: half-velocity constant (Ks) of 0.39 g COD/L, maximum specific utilization rate (k) of 0.2 mol/L [NO x Fe(II)EDTA(2-)](g VSS/L)d(-1), and inhibition constant (K(I)) of 0.33 g COD/L, as applied to the modified Monod kinetic expression described herein. Based on batch analyses, the biomass yield of nitrosyl-adduct-reducing bacteria was estimated to be 0.259 g VSS/g COD, endogenous decay was experimentally determined to be 0.0569 L/d, and an average of 1.26 times the stoichiometric demand of ethanol was used to complete reduction reactions.     

Size and composition distributions of particulate matter emissions: part 1--light-duty gasoline vehicles

Size-resolved particulate matter (PM) emitted from light-duty gasoline vehicles (LDGVs) was characterized using filter-based samplers, cascade impactors, and scanning mobility particle size measurements in the summer 2002. Thirty LDGVs, with different engine and emissions control technologies (model years 1965-2003; odometer readings 1264-207,104 mi), were tested on a chassis dynamometer using the federal test procedure (FTP), the unified cycle (UC), and the correction cycle (CC). LDGV PM emissions were strongly correlated with vehicle age and emissions control technology. The oldest models had average ultrafine PM0.1 (0.056- to 0.1-microm aerodynamic diameter) and fine PM1.8 (< or =1.8-microm aerodynamic diameter) emission rates of 9.6 mg/km and 213 mg/km, respectively. The newest vehicles had PM0.1 and PM1.8 emissions of 51 microg/km and 371 microg/km, respectively. Light duty trucks and sport utility vehicles had PM0.1 and PM1.8 emissions nearly double the corresponding emission rates from passenger cars. Higher PM emissions were associated with cold starts and hard accelerations. The FTP driving cycle produced the lowest emissions, followed by the UC and the CC. PM mass distributions peaked between 0.1- and 0.18-microm particle diameter for all vehicles except those emitting visible smoke, which peaked between 0.18 and 0.32 microm. The majority of the PM was composed of carbonaceous material, with only trace amounts of water-soluble ions. Elemental carbon (EC) and organic matter (OM) had similar size distributions, but the EC/OM ratio in LDGV exhaust particles was a strong function of the adopted emissions control technology and of vehicle maintenance. Exhaust from LDGV classes with lower PM emissions generally had higher EC/OM ratios. LDGVs adopting newer technologies were characterized by the highest EC/OM ratios, whereas OM dominated PM emissions from older vehicles. Driving cycles with cold starts and hard accelerations produced higher EC/OM ratios in ultrafine particles.     

Effect of long-term changes in soil chemistry induced by road salt applications on N-transformations in roadside soils

Of several impacts of road salting on roadside soils, the potential disruption of the nitrogen cycle has been largely ignored. Therefore the fates of low-level ammonium-N and nitrate-N inputs to roadside soils impacted by salting over an extended period (decades) in the field have been studied. The use of road salts disrupts the proportional contributions of nitrate-N and ammonium-N to the mineral inorganic fraction of roadside soils. It is highly probable that the degree of salt exposure of the soil, in the longer term, controls the rates of key microbial N transformation processes, primarily by increasing soil pH. Additional influxes of ammonium-N to salt-impacted soils are rapidly nitrified therefore and, thereafter, increased leaching of nitrate-N to the local waterways occurs, which has particular relevance to the Water Framework Directive. The results reported are important when assessing the fate of inputs of ammonia to soils from atmospheric pollution.     

Some issues relating to the use of perfluorooctanesulfonate (PFOS) samples as reference standards

Samples of potassium perfluorooctanesulfonate (PFOSK) from three suppliers were analyzed by LC-ESI-MS/MS for purity and by LC-ESI-MS for the percentage of linear isomer present. Our data indicated that the purity ranged from 80% to 98% and the percentages of linear isomer from 67% to 79%. The proportion of branched isomers present in the samples was also estimated using (19)F NMR. These results agreed quite closely with those found by LC-ESI-MS indicating that there is essentially no difference in overall SIM response factor for the branched isomers vs. that of the linear isomer. Several further observations relevant to the use of standards when analyzing for PFOS were encountered during this study. It appears unlikely that matrix effects attributable to the cation (sodium or potassium) present in PFOSNa or PFOSK internal standards is an issue. In seeking potential matrix effects, it was found that the chromatography was improved substantially when the standard was injected as a solution in 80:20 methanol/water rather than 100% methanol. Notably, in concert with the improvement in chromatography, an increase of about 10% in response was observed. In some closely related studies, when (18)O(2) mass-labeled perfluorohexanesulfonate was used as an internal standard, the actual and theoretical concentration ratios matched closely those for related native sulfonates as long as they did not co-elute. However, when they did co-elute, the peak intensities of the native species were enhanced by about 5%, while those of the labeled compound were suppressed by a similar amount. If this effect were not taken into account, the concentration of the native would be inflated by 10%.     

Barriers to interlock implementation

This commentary reviews current and past vehicle interlock programs for impaired driving offenders with a focus on the challenges that courts and motor vehicle departments face in attempting to implement mandatory programs as required by current federal legislation. There are few offenders in interlock programs compared to the large number of impaired drivers arrested each year. This suggests that, to increase participation, courts will have to threaten more severe sanctions for those offenders who reject interlock programs. A combination of electronic house arrest with interlock programs is suggested as a method of maximizing interlock use.     

The relationship between job experiences and psychological distress: A structural equation approach

Using structural equations, we estimated the relationship between employees' experiences of seven job conditions, that have been identified as potential job stressors, and psychological distress in a random sample of 504 full-time employed men and women in dual-earner couples. The seven job conditions were: skill discretion, decision authority, schedule control, job demands, pay adequacy, job security, and relations with supervisor. We found that two job conditions — skill discretion and job demands — were related to psychological distress, whereas five other conditions were not. These findings lend partial support to Karasek's job demand — job control model. In our analysis, skill discretion, one of the two components of job control (referred to jointly as decision latitude) was related to distress, however, decision authority, the second component, was not. A third aspect of control, schedule control, was also unrelated to distress. For full-time employed women and men in dual-earner couples, the additive effects of feeling concerned about having to do dull, monotonous work and having to work under pressure of time and conflicting demands were associated with psychological distress. Finally, the magnitude of the relationships between these job experiences and psychological distress did not differ between men and women.     

Single-laboratory evaluation and modification of U.S. EPA methods 7470 and 7471 for the determination of mercury in aqueous and solid hazardous wastes

The current U.S. Environmental Protection Agency (U.S. EPA) protocols for mercury determinations in aqueous and solid waste samples (SW-846 Methods 7470 and 7471) using recirculating cold-vapor atomic absorption spectrometry (CV-AAS) have been evaluated. The U.S. EPA methods are not sufficiently flexible to permit special quality control (QC) measures, have limited detectability for low-level mercury concentrations, and are plagued by spectral interferences caused by the nonspecific absorption of primary mercury radiation by volatile organic vapors. The U.S. EPA protocols have been modified in a single-laboratory study to facilitate additional QC measures, to enhance detectability for low-level mercury concentrations, and to eliminate nonspecific vapor absorption interferences. Volumetric manipulations for additional QC measures, if required, are facilitated by performing the sample digestions in Erlenmeyer flasks rather than in the current Biochemical Oxygen Demand (BOD) reduction-aeration bottles. Typical manipulations for additional QC measures that are now feasible include dilution of concentrated samples and multiple aliquot sampling for post-digestion spike and replicate analyses. Instrument detectability is improved 10-fold by using a gas sparging bottle as a dedicated reduction-aeration vessel and a silver wool-amalgamation CV-AAS system operated in an open configuration. The on-line amalgamation/thermal desorption process of the modified CV-AAS system eliminates interfering water and organic matrix vapors prior to the mercury absorption measurement. Good accuracy and precision have been obtained with the amalgamation CV-AAS system for the analyses of four reference sediment materials. The amalgamation CV-AAS measurements on the reference sediment digests have been successfully performed at absolute mercury concentration levels that are only 1 to 4 times above the instrumental detection limit of the U.S. EPA recirculating CV-AAS method.     

Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

Seeing the forest not for the carbon: why concentrating on land-use-induced carbon stock changes of soils in Brazil can be climate-unfriendly

Regional Environmental Change - Soil carbon stocks of 29 plots along a transect through tropical Brazil showed only minor soil carbon losses after land use shift, although replacement of...     

Social and ecological facets of pest management in Honduran subsistence agriculture: implications for IPM extension and natural resource management

In subsistence farming systems of the developing world, adoption of resource-conserving practices such as integrated pest management (IPM) is often strikingly low. This has partially been ascribed to researchers’ limited understanding of how technologies develop at the interface of the systems’ social and ecological components. In Honduras (Central America), there exists concern about limited adoption and diffusion of IPM technologies in certain smallholder production systems. In this study, we determine social and ecological drivers of IPM adoption in subsistence maize production in the country’s hillside environment. Honduran small-scale maize production is typified by a key insect pest (the fall armyworm, Spodoptera frugiperda) being partly kept at bay through action of a diverse natural enemy complex, including ants, social wasps, carabid beetles, and spiders. Local agricultural landscapes, primarily shaped through shifting cultivation, provide key resources to maintain this natural enemy diversity. These local ecological conditions and related natural enemy abundance strongly influence farmers’ agroecological knowledge and pest management practices. In the meantime, farmer practices are also affected by local communication networks, which help validate and spread IPM concepts and technologies. Based on our findings, we advocate a holistic approach to improve IPM extension through mapping of agroecological opportunities, visualization of regional patterns in farmer knowledge, and associated priority setting. Local IPM capacity could be built through institutional strengthening and adaptive comanagement, while IPM training should be linked with natural resource management initiatives. These approaches may eventually improve the way IPM is delivered to small-scale farmers who operate in the ecologically diverse environments of the tropics.