Air dispersion of heavy metals in the vicinity of the As-Sb-Tl abounded mine and responsiveness of moss as a biomonitoring media in small-scale investigations

A systematic study was carried out to investigate air deposition and to explore the natural distribution and enrichment (contamination) with trace elements in the small area (cca. 13 km²) of an antimony-arsenic-thallium mineralization outcrop at an abandoned mine “Allchar.” The mine is located on the northwestern part of Ko?uf Mount, Republic of Macedonia. The locality of Allchar is unique in its mineral composition; besides a very intriguing mineral, lorandite, there are 45 other minerals, some of which are rare. The distribution of 53 elements (with special attention to As, Sb, and Tl) were detected in 69 moss samples from eight various species collected from this area. Moss samples were analyzed following microwave digestion by inductively coupled plasma–mass spectrometry and inductively coupled plasma–atomic emission spectrometry. It was found that the atmospheric deposition for As in the moss samples on or around the Allchar mine is >6.5 times higher and for Tl is 19 times higher compared to values for the samples from the rest of the Allchar area. By the application of multivariate cluster and R-mode factor analyses (FA), five geochemical associations were determined. Cluster and R-mode FA were used to identify and characterize element associations, and five associations of elements were determined by the method of multivariate statistics. F1 (Co, Cr, Fe, Sc, Li, V, Ga, Y, Ni, Mn, Al, La-Lu, Cu, Ge, Be, Bi, and Hf); F2 (As, Tl, Sb, and Mg); F3 (Rb, Cs, and Mo); F4 (Sr, Ba, Hf, Zr, La-Lu, and Bi), and F5 (Cd, Zn, Ag, and Cu).     

Effects of Design and Fuel Moisture on Incinerator Effluents

The particle and gas properties that profoundly affect design and performance of fly ash precipitators are discussed and evaluated in this section. Relation of the coal burned to these properties and to the precipitator gas cleaning problem is broadly examined. The need for a high order of technology consistently applied to cope successfully with the wide and often uncertain variations in coal and ash properties encountered in precipitation practices is emphasized.     

Air Pollution Effects of Incinerator Firing Practices and Combustion Air Distribution

A survey of academic programs in air pollution control was made. Results from the 127 schools reporting are tabulated by state. Faculty involved in air pollution instruction are identified. Some conclusions and recommendations are presented.     

Estimation of Smog Effects in the Hydrocarbon-Nitric Oxide System

Hydrocarbon components (propylene, simulated auto exhaust, or authentic auto exhaust) were irradiated in the presence of nitric oxide in large chambers instrumented for measurements of numerous variables. Eye irritation was measured using a selected panel of human subjects. The various dependent variables are presented as functions of the reactant concentrations by means of contour diagrams derived by computer treatment. The effect of “hydrocarbon” and nitric oxide levels on smog effects are discussed; the observed relationships between end effects and reaction rates are considered. The study simulated the effects of varying degrees of vehicular emissions control over one or both reactants and has a bearing on the establishment of vehicle emission standards in California.     

A Comparison Study of Various Types of Ozone and Oxidant Detectors Which Are Used for Atmospheric Air Sampling

Four continuous automatic analyzers for measurement of atmospheric levels of ozone were used in a calibration and field study. These were (1) a colorimetric instrument based upon detection of iodine released from neutral potassium iodide reagent, {2) a coulometric instrument utilizing the polarization current as a measurement of iodine released by ozone in a cell contacted by potassium iodide reagent, (8) a galvanic cell measuring bromine release by ozone, and (4) an ultraviolet photometer. Some ozone determinations by the manual rubber cracking procedure were included. After calibration with ozone the average relative response to atmospheric ozone levels for each instrument was determined using the colorimetric oxidant analyzer as an arbitrary standard. These responses ranged from 77 percent for the galvanic cell 90 percent for the photometer. The instrument of choice for any given application would seem to be governed by requirements for precision specificity, portability, reliability, and ease of operation.     

Air Pollution Equipment for Foundry Cupolas

The choice of air pollution equipment best suited for a specific foundry cupola involves the consideration of a number of factors.—They are: (1) The design of the cupola, including openings, door enclosures, height of stack, etc. These features greatly affect the size, cost, and efficiency of control systems. (2) The constituents of the effluent gas and the other properties, such as temperature and volume, are extremely important because corrosion, warpage, and low efficiency can result from these variables. (3) Four distinctly different types of air pollution control equipment are available for cupolas. They vary widely in initial cost, operating cost, and maintenance, but also vary widely in efficiency. (4) Local air pollution regulations and community considerations dictate the choice of air pollution equipment. Those regulations now in force are quite stringent in some localities, but quite lenient in others. An incremental approach to installation of systems would make one economically feasible for the small foundry.     

Multi-Instrument Performance Evaluation of Conductivity-Type Sulfur Dioxide Analyzers

Three different recording analyzers for sulfur dioxide were operated in parallel under field conditions. Manual sampling for sulfur dioxide using the West-Gaeke procedure supplemented the instrumental evaluation tests. Two of the analyzers were of the continuous-flow type. These were found to give markedly higher readings for SO₂ in the atmosphere (in some cases as much as threefold) than did the other recorder which was sequential-batch or the West-Gaeke manual method.     

Mercury Balance on a Large Pulverized Coal-Fired Furnace

This paper presents results of a survey of mercury concentrations in coal, ash, water, fly ash, and flue gas discharges from a 5.5 × 10⁶ Ib/hr steam generator serving a 775 MW (net) turbine-generator set. Representative composite or grab samples were obtained for inlet coal and outlet ash and water. Stack samples were obtained for fly ash and mercury vapor emissions while the unit was operated at 660 MW (net) (85% of full load). Samples were analyzed by anodic stripping voltammetry, plasma emission spectroscopy, and neutron activation analysis to determine mercury concentration entering the furnace in the coal and leaving the furnace in the flue gas, fly ash, bottom and hopper ash, and water. Method inter-comparisons are discussed. A material balance for mercury has been calculated from fuel, ash, and stack gas flow rates. About 90% of the mercury in the coal is released and appears as vapor discharged in the stack gas while 10% remains in the residual ash. For a 700 MW (net) unit, about 5 lb/day of mercury vapor is released to the atmosphere.