Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

Operational decisions in response to a performance-based regulation to reduce organic waste impacts near Atlantic salmon farms in British Columbia,Canada

Nutrient enrichment of the seafloor (benthos) has been a primary subject of investigation since the beginning of commercial salmon farming. Waste feed and feces passing through the containment nets can create zones of organic enrichment to the benthos in the vicinity of the pen cages. Early studies of salmon farming in British Columbia Canada (500–1200 metric ton production farms) showed that these effects varied greatly and were reduced where conditions of adequate water depth and strong tidal currents were present. More recent studies of farms producing in excess of 2000 tons of fish have documented measurable organic benthic impacts.The implementation of a performance-based waste regulation in British Columbia in 2002 has caused operational changes to achieve and maintain compliance. This paper describes field monitoring data for four representative farm operations including the waste impact levels prior to the implementation of regulatory standards and the effect of adaptive management actions taken to reduce organic enrichment such as modified feed delivery, relatively small position changes to the cages or reducing site production to achieve continuing compliance.Monitoring over several full production cycles at selected farms indicated that sediment impacts at maximum production levels have decreased while maintaining, and in some cases increasing overall production of salmon.     

Cleaner tanning practices for tannery pollution abatement: Role of enzymes in eco-friendly vegetable tanning

Concern about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Thus, the leather industry is also under pressure to look for effective alternative tanning materials for chromium. Natural products like vegetable tannins are regaining importance. However, there are limitations in the use of vegetable tanning materials because of its high organic load in the effluent, which are difficult to degrade leading to high chemical oxygen demand (COD). Moreover, conventional vegetable tanning process requires partial pickling that involves the use of sodium chloride, to suppress osmotic swelling. This results in very high amount of total dissolved solid (TDS) content in wastewaters. In this investigation, an attempt has been made to design an eco-friendly vegetable tanning process combining pickle-free tanning and application of proteolytic enzymes to improve the exhaustion of vegetable tannins. Such an approach has resulted in more than 95% tannin exhaustion in the case of the experimental process, an increase of 10% compared with the conventional vegetable tanning process. The tanned leathers showed slight improvement in hydrothermal stability. Physical and tactile evaluation of experimental leathers has been better than conventionally tanned leathers. Surface colour values illustrated negligible variation in colour and shade between control and experimental leathers. The resultant leather showed opened up, split compact fibre structure that has been well coated, indicating that the enzyme assisted tanning process did not bring about any major change or destruction on the fibre structure of the leathers. The optimized system has been field tested in a commercial tannery. The results showed that the enzyme assisted tanning process is efficient in terms of improved quality of leather and also led to reduction in total solids (TS), chlorides and COD loads. The enzyme assisted tanning system presented appears to be a viable option for combating pollution arising from the conventional vegetable tanning system.     

Yield response of potato to spatially patterned nitrogen application

Although crop response to nitrogen fertilization has long been studied, classical experimental designs have led to inadequate accounting of spatial variability in field properties and yield response. Analytical methods to explicitly account for spatial variability now exist but the complementary modification of experimental design is still developing. There is a need to combine these analytical methods with non-traditional experimental design. A 2-year study was implemented to assess the response of potato (Solanum tuberosum cv. Kennebec) yield to nitrogen fertilizer rate. We used a transect-type plot design where four nitrogen treatments (0, 56, 112, and 280 kg N ha^?1) were applied systematically in a continuous sinusoidal pattern along longitudinal transects. Measured field properties included topography, soil texture, pre-application soil nitrate levels, and plant available soil water content. A random field linear model was used to simultaneously account for treatment effects and soil properties. The results showed that treatment effects were significantly different from each other; however, if spatially correlated errors were accounted for, these differences were smaller and significance levels lower. Nitrogen response functions varied widely throughout the field. Of the covariates, only clay content proved important in explaining spatial differences in response to N. The sinusoidal response pattern of N was similar over the 2 years but the amplitudes varied due to differences in weather. Interactions between uncharacteristically high rainfall and a sandy field soil may have minimized discernable effects of the other covariates. The results demonstrated how the statistical analysis of potato response to a patterned application of nitrogen fertilizer can take advantage of spatial correlations to understand the response of potato to nitrogen application over larger areas.     

Carbon accumulation through ecosystem recovery

A market has emerged for carbon sequestered through reforestation. The opportunity to restore ecosystems through this market rather than establish plantations is demonstrated by an Australian case study. In the state of Queensland there are vast areas that have been cleared relatively recently and could be restored to ecosystems with high resilience and important biodiversity values with appropriate management. In order to foster opportunities for carbon accumulation through ecosystem recovery spatially explicit information on sequestration rates, management recommendations, and clear definitions of ancillary biodiversity benefits need to be defined.     

Estimating carbon in savanna ecosystems: rational distribution of effort

Minimising the cost of repeatedly estimating C (C) stocks is crucial to the financial viability of projects that seek to sell C credits. Depending on the price of C, this may imply less or more sampling effort than would be applied for science objectives. In systems with heterogeneous C pools, such as savannas, this translates into a variable-effort sampling strategy that maximises the marginal additional C that can be claimed per incremental unit of effort expended. Analysis of a savanna in north-eastern South Africa indicates relatively modest returns per hectare due to the small C quantities and low sequestration rates. Under these conditions, areas in excess of 1,000 ha and infrequent sampling frequencies of 5–10 years are required to make such projects financially viable. For such projects the sample variance, number of samples, cost per sample and establishment costs have negligible impacts on financial viability. It was also found that the soil-C pool contributes up to three times the net returns of the aboveground C pool and provides a strong argument to monitor soil C for certification and market trading. The financial viability estimates, however, do not include the management or opportunity costs incurred in changing the land use. The economies of scale identified in this study combined with the massive area covered by savannas indicate that these additional costs can be covered. Further research is recommended to quantify these costs and interrogate the feasibility of large scale (in excess of 10,000 ha) C-sink projects in savanna systems.     

The value of Seasonal Correction Factors in assessing the health risk from domestic radon: a case study in Northamptonshire, UK

Following an intensive survey of domestic radon levels in the United Kingdom (UK), the former National Radiological Protection Board (NRPB), now the Radiation Protection Division of the Health Protection Agency (HPA-RPD), established a measurement protocol and promulgated Seasonal Correction Factors applicable to the country as a whole. Radon levels in the domestic built environment are assumed to vary systematically and repeatably during the year, being generally higher in winter. The Seasonal Correction Factors therefore comprise a series of numerical multipliers, which convert a 1-month or 3-month radon concentration measurement, commencing in any month of the year, to an effective annual mean radon concentration. In a recent project undertaken to assess the utility of short-term exposures in quantifying domestic radon levels, a comparative assessment of a number of integrating detector types was undertaken, with radon levels in 34 houses on common geology monitored over a 12-month period using dose-integrating track-etch detectors exposed in pairs (one upstairs, one downstairs) at 1-month and 3-month resolution. Seasonal variability of radon concentrations departed significantly from that expected on the basis of the HPA-RPD Seasonal Correction Factor set, with year-end discontinuities at both 1-month and 3-month measurement resolutions. Following this study, monitoring with electrets was continued in four properties, with weekly radon concentration data now available for a total duration in excess of three and a half years. Analysis of this data has permitted the derivation of reliable local Seasonal Correction Factors. Overall, these are significantly lower than those recommended by HPA-RPD, but are comparable with other results from the UK and from abroad, particularly those that recognise geological diversity and are consequently prepared on a regional rather than a national basis. This finding calls into question the validity of using nationally aggregated Seasonal Correction Factors, especially for shorter exposures, and the universal applicability of these corrections is discussed in detail.