Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.     

Environmental risk mapping of accidental pollution and its zonal prevention in a city

Accidental releases of pollution can have severe environmental, societal, economic, and institutional consequences. This paper considers the use of risk mapping of accidental pollution events, and zonal prevention measures for alleviating the impact on large urban areas. An Environmental Pollution Accident Risk Mapping (EPARM) model is constructed according to a mapping index system supported by quantitative sub-models dedicated to evaluating the risk arising from different sources of potential accidental pollution. The EPARM approach consists of identifying suitable indexes, assessment of environmental risk at regional and national scales based on information on previous pollution accidents and the prevailing environmental and social conditions, and use of GIS to map the overall risk. A case study of pollution accidents in Minghang District, Shanghai, China is used to demonstrate the effectiveness of the model. The paper also proposes a systemic framework for accidental environmental pollution risk prevention, and detailed countermeasures for specific risk zones.     

Petroleum hydrocarbon concentrations in eight mollusc species along Tamilnadu coast, Bay of Bengal, India

Eight mollusc species and sediment samples collected from three different stations along Tamilnadu coast, Bay of Bengal, India were analysed for the levels of petroleum hydrocarbons to elucidate the status of the petroleum residues in mollusc meant for human consumption. The concentrations of petroleum hydrocarbons in sediments along Tamilnadu coast varied from 5.04–25.5 g/g dw (dry weight). High concentration of petroleum hydrocarbons in the sediment of Uppanar estuary (25.5 1.45 g/g dw) was perhaps land and marine based anthropogenic sources of this region. The petroleum hydrocarbon residues in eight mollusc species collected from Uppanar, Vellar and Coleroon estuaries varied between 2.44–6.04 g/g ww (wet weight). Although the concentration of petroleum hydrocarbons in sediment of the Uppanar region was markedly higher than the background, the petroleum hydrocarbon residues in mollusc collected from Uppanar estuary did not suggest bioaccumulation. The results signified that industrial growth has affected the aquatic environments and regular monitoring will help to adopt stringent pollution control measures for better management of the aquatic region.     

空气污染与儿童呼吸系统患病率的相关分析

 在流行病学调查和空气污染物监测的基础上，研究讨论了儿童呼吸系统患病率与空气污染之间的相关关系，结果表明，空气中细颗粒物（PM_2.5）和可吸入颗粒物（PM₁₀）与儿童呼吸系统患病率呈线性正相关关系，其影响比SO₂、Nox更密切．哮喘明显受颗粒物、SO₂、Nox的综合作用的影响．未感冒咳嗽发生率明显受细颗粒物和Nox污染综合作用的影响．     

Operational decisions in response to a performance-based regulation to reduce organic waste impacts near Atlantic salmon farms in British Columbia,Canada

Nutrient enrichment of the seafloor (benthos) has been a primary subject of investigation since the beginning of commercial salmon farming. Waste feed and feces passing through the containment nets can create zones of organic enrichment to the benthos in the vicinity of the pen cages. Early studies of salmon farming in British Columbia Canada (500–1200 metric ton production farms) showed that these effects varied greatly and were reduced where conditions of adequate water depth and strong tidal currents were present. More recent studies of farms producing in excess of 2000 tons of fish have documented measurable organic benthic impacts.The implementation of a performance-based waste regulation in British Columbia in 2002 has caused operational changes to achieve and maintain compliance. This paper describes field monitoring data for four representative farm operations including the waste impact levels prior to the implementation of regulatory standards and the effect of adaptive management actions taken to reduce organic enrichment such as modified feed delivery, relatively small position changes to the cages or reducing site production to achieve continuing compliance.Monitoring over several full production cycles at selected farms indicated that sediment impacts at maximum production levels have decreased while maintaining, and in some cases increasing overall production of salmon.     

Cleaner tanning practices for tannery pollution abatement: Role of enzymes in eco-friendly vegetable tanning

Concern about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Thus, the leather industry is also under pressure to look for effective alternative tanning materials for chromium. Natural products like vegetable tannins are regaining importance. However, there are limitations in the use of vegetable tanning materials because of its high organic load in the effluent, which are difficult to degrade leading to high chemical oxygen demand (COD). Moreover, conventional vegetable tanning process requires partial pickling that involves the use of sodium chloride, to suppress osmotic swelling. This results in very high amount of total dissolved solid (TDS) content in wastewaters. In this investigation, an attempt has been made to design an eco-friendly vegetable tanning process combining pickle-free tanning and application of proteolytic enzymes to improve the exhaustion of vegetable tannins. Such an approach has resulted in more than 95% tannin exhaustion in the case of the experimental process, an increase of 10% compared with the conventional vegetable tanning process. The tanned leathers showed slight improvement in hydrothermal stability. Physical and tactile evaluation of experimental leathers has been better than conventionally tanned leathers. Surface colour values illustrated negligible variation in colour and shade between control and experimental leathers. The resultant leather showed opened up, split compact fibre structure that has been well coated, indicating that the enzyme assisted tanning process did not bring about any major change or destruction on the fibre structure of the leathers. The optimized system has been field tested in a commercial tannery. The results showed that the enzyme assisted tanning process is efficient in terms of improved quality of leather and also led to reduction in total solids (TS), chlorides and COD loads. The enzyme assisted tanning system presented appears to be a viable option for combating pollution arising from the conventional vegetable tanning system.     

Yield response of potato to spatially patterned nitrogen application

Although crop response to nitrogen fertilization has long been studied, classical experimental designs have led to inadequate accounting of spatial variability in field properties and yield response. Analytical methods to explicitly account for spatial variability now exist but the complementary modification of experimental design is still developing. There is a need to combine these analytical methods with non-traditional experimental design. A 2-year study was implemented to assess the response of potato (Solanum tuberosum cv. Kennebec) yield to nitrogen fertilizer rate. We used a transect-type plot design where four nitrogen treatments (0, 56, 112, and 280 kg N ha^?1) were applied systematically in a continuous sinusoidal pattern along longitudinal transects. Measured field properties included topography, soil texture, pre-application soil nitrate levels, and plant available soil water content. A random field linear model was used to simultaneously account for treatment effects and soil properties. The results showed that treatment effects were significantly different from each other; however, if spatially correlated errors were accounted for, these differences were smaller and significance levels lower. Nitrogen response functions varied widely throughout the field. Of the covariates, only clay content proved important in explaining spatial differences in response to N. The sinusoidal response pattern of N was similar over the 2 years but the amplitudes varied due to differences in weather. Interactions between uncharacteristically high rainfall and a sandy field soil may have minimized discernable effects of the other covariates. The results demonstrated how the statistical analysis of potato response to a patterned application of nitrogen fertilizer can take advantage of spatial correlations to understand the response of potato to nitrogen application over larger areas.     

Carbon accumulation through ecosystem recovery

A market has emerged for carbon sequestered through reforestation. The opportunity to restore ecosystems through this market rather than establish plantations is demonstrated by an Australian case study. In the state of Queensland there are vast areas that have been cleared relatively recently and could be restored to ecosystems with high resilience and important biodiversity values with appropriate management. In order to foster opportunities for carbon accumulation through ecosystem recovery spatially explicit information on sequestration rates, management recommendations, and clear definitions of ancillary biodiversity benefits need to be defined.     

Estimating carbon in savanna ecosystems: rational distribution of effort

Minimising the cost of repeatedly estimating C (C) stocks is crucial to the financial viability of projects that seek to sell C credits. Depending on the price of C, this may imply less or more sampling effort than would be applied for science objectives. In systems with heterogeneous C pools, such as savannas, this translates into a variable-effort sampling strategy that maximises the marginal additional C that can be claimed per incremental unit of effort expended. Analysis of a savanna in north-eastern South Africa indicates relatively modest returns per hectare due to the small C quantities and low sequestration rates. Under these conditions, areas in excess of 1,000 ha and infrequent sampling frequencies of 5–10 years are required to make such projects financially viable. For such projects the sample variance, number of samples, cost per sample and establishment costs have negligible impacts on financial viability. It was also found that the soil-C pool contributes up to three times the net returns of the aboveground C pool and provides a strong argument to monitor soil C for certification and market trading. The financial viability estimates, however, do not include the management or opportunity costs incurred in changing the land use. The economies of scale identified in this study combined with the massive area covered by savannas indicate that these additional costs can be covered. Further research is recommended to quantify these costs and interrogate the feasibility of large scale (in excess of 10,000 ha) C-sink projects in savanna systems.