Proximity to wood industries and respiratory symptoms in children: a sensitivity analysis

Increased prevalence of respiratory and irritation symptoms was found in children who live near a large wood industrial park. Proximity to the wood industries was used as indicator of exposure. This study describes a sensitivity analysis for the results of the survey. All the children (3-14 years) living in the area were surveyed through a parental questionnaire (n = 3854) and their addresses were geocoded. The distances from each child's home and school to the closest industry were combined, weighted and used as an indicator of exposure. A sensitivity analysis was performed to check 1) the robustness of the results to the choice of weights used for defining the exposure indicator, 2) the effect of outliers on risk estimates and 3) the sensitivity on the functional form used for modeling the dose-response function. The choice of the weights did not influence the association between proximity to the industries and respiratory symptoms. Excluding the subjects who lived far away from the industries showed that in a radius of 5 km from the industries the study did not had enough power to estimate a gradient in the dose-response function. Besides, results were sensitive to the choice of the functional form used for modeling the minimum distance. The sensitivity analyses confirmed the overall increasing trend of respiratory symptoms with proximity to the industries and pointed out that all the assumptions made for defining a proxy of exposure need to be carefully checked.     

Comparative assessment of metribuzin sorption efficiency of biochar,hydrochar and vermicompost

Abstract

In this study, we used two biochars (BC) produced from grapevine pruning residues (BCgv) and red spruce wood (BCrs), two hydrochars (HC) from urban pruning residues (HCup) and the organic fraction of municipal solid wastes (HCuw), and two vermicomposts (VC) obtained vermicomposting digestates from buffalo manure (VCbm) and mixed feedstock (VCmf). Adsorption kinetics and isotherms of metribuzin onto these materials were performed. Sorption kinetics followed preferentially a pseudo-second-order model, thus indicating the occurrence of chemical interactions between the sorbate and the adsorbents. Adsorption constants were calculated using the Freundlich and Langmuir models. Metribuzin sorption data on BCgv and both HC fitted preferentially the Freundlich equation, whereas on the other materials data fitted both isotherms well (r?>?0.95). Metribuzin sorption capacity of the materials followed the trend BC?>?HC?>?VC. Sorption constants of metribuzin normalised per organic carbon content (K_OC) on BCgv, BCrs, HCup, HCuw, VCbm and VCmf were 561, 383, 251, 214, 102 and 84?L kg^?1, respectively. A significant positive correlation (P?=?0.016) was calculated between distribution coefficients (K_d) of all materials and the corresponding organic carbon contents, thus indicating a prominent role of the organic fraction of these materials in the adsorption of metribuzin.     

Fast determination of phenoxy acid herbicides in carrots and apples using liquid chromatography coupled triple quadrupole mass spectrometry

A fast, simple and inexpensive method has been developed for the analysis of phenoxy acid herbicides: 2,4-dichlorophenoxyacetic acid (2,4-D), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2-(4-chloro-o-tolyloxy)propionic acid (MCPP), 2-(4-aryloxyphenoxy)propionic acid (Fluazifop) and 2-(4-aryloxyphenoxy)propionic acid (Haloxyfop) in carrots and apples by liquid chromatography coupled to triple quadrupole mass spectrometry (LC/MS/MS). The compounds were analyzed by QuEChERS (quick, easy, cheap, effective, rugged, safe) methodology without cleanup.

The recoveries were performed at two spiked levels (0.05 and 0.5 mg/kg) for both matrices with six replicates for each level. The mean recoveries ranged from 70–92% for both apples and carrots. The precision of the method expressed as relative standard deviation (RSD%) was found to be in the range 3–15%. For all compounds, good linearity (r² > 0.99) was obtained over the range of concentration from 0.05 μ g/mL to 0.5 μ g/mL, corresponding to the pesticide concentrations of 0.05 mg/kg and 0.5 mg/kg, respectively. The determination limits (LOQs) ranged from 0.01 ng/mL to 1.3 ng/mL in solvent, whereas, the LOQs calculated in matrix ranged from 0.05 ng/g to 21.0 ng/g for apples and from 0.06 ng/g to 10.2 ng/g for carrots. The developed methodology combines the advantages of both QuEChERS and LC/MS/MS producing a very rapid, sensitive and cheap method useful for the routine analytical laboratories.     

Evaluation of Human Exposure to Ambient PM10 in the Metropolitan Area of Mexico City Using a GIS-Based Methodology

ABSTRACT

The main goal of this study was to evaluate the magnitude of outdoor exposure to fine particulate matter (PM₁₀) potentially experienced by the population of metropolitan Mexico City. With the use of a geographic information system (GIS), spatially resolved PM₁₀ distributions were generated and linked to the local population. The PM₁₀ concentration exceeded the 24-hr air quality standard of 150 μg/m³ on 16% of the days, and the annual air quality standard of 50 μg/m³ was exceeded by almost twice its value in some places. The basic methodology described in this paper integrates spatial demographic and air quality databases, allowing the evaluation of various air pollution reduction scenarios. Achieving the annual air quality standard would represent a reduction in the annual arithmetic average concentration of 14 μg/m³ for the typical inhabitant. Human exposure to particulate matter (PM) has been associated with mortality and morbidity in Mexico City; reducing the concentration levels of this pollutant would represent a reduction in mortality and morbidity and the associated cost of such impacts. This methodology is critical to assessing the potential benefits of the current initiative to improve air quality implemented by the Environmental Metropolitan Commission of Mexico City.     

Diurnal and seasonal variations of carbonyls and their effect on ozone concentrations in the atmosphere of Monterrey,Mexico

Few studies have been made regarding carbonyl concentrations in Monterrey, México. The Monterrey Metropolitan Area (MMA) has the third largest population in the country and has increasing pollution issues. The concentrations of 10 aldehydes and two ketones were measured in the MMA, in the spring and fall of 2011 and 2012. Formaldehyde (16–42 ppbv) was the most abundant carbonyl, followed by acetaldehyde (5–15 ppbv) and acetone (7–15 ppbv). The concentrations showed marked diurnal trends with maximum values between 10:00 a.m. and 2:00 p.m., when photochemical activity is intense. Thus, secondary production of carbonyls is statistically significant in the city. Biogenic production of several carbonyls, such as 2-butanone, was supported by their mid correlation with solar radiation and low correlation with propionaldehyde, which is mainly emitted by anthropogenic sources. The seasonal variability of the concentrations was observed in the first three samplings, with the highest levels reached in the fall. The rainy conditions during the fourth sampling did not allow comparison. Carbonyl–NOx–O₃ analysis was made. Results indicated a carbonyl-sensitive atmosphere, especially during the midday samplings of 10:00 a. m. to 2:00 p.m. and 2:00 p.m. and 6:00 p.m. because of the intense solar radiation during these periods.

Implications:?Monitoring of carbonyls in Monterrey, Mexico, was performed to quantify the pollutant concentration in the city’s atmosphere. Although primary emission is significantly important, the secondary production of the pollutants, along with ozone production being carbonyl sensitive, indicates that air pollution controls must address the direct sources and the precursors of the pollutants to achieve air quality.     

Polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in milk from Italian women living in Rome and Venice

The levels of selected polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) were measured in human milk samples from the areas of Venice and Rome, primarily in order to characterize the current levels of infant exposure to PCBs and PBDEs due to breast feeding in Italy. Sixteen non-dioxin-like PCBs, including the traditional indicator congeners, and 11 PBDEs, comprising the relevant PBDE-47, PBDE-99, and PBDE-153, were determined. Congeners were selected for analysis according to their relative abundance in human tissues, toxicological relevance, and diffusion in the environment. Dietary habits of the milk donors were recorded by questionnaires; mothers of the Venice area were classified into three groups according to their consumption of local fish, molluscs, and other fishery products. Sigma(16)(PCBs) and Sigma(11)(PBDEs) (ng g(-1) fat) for the areas of Venice and Rome were respectively, 250-390 and 240, and 1.6-2.8 and 4.1. An increase of fish and fishery product consumption could not be associated with an increase of PCB and PBDE levels in milk.     

Test methods for assessing the biological stability of biodegradable waste

This paper presents some results of investigations for the characterization of waste excavated from closed landfills and of waste sampled during mechanical-biological pretreatment before disposal in landfill. The results reported are those obtained with the tests carried out for the assessment of the biological stability of the waste. Some of the considered tests, such as the ones for the determination of the respiration activity and the biogas production, are well known and have been applied for years; other tests, such as the ones for the determination of BOD5 and COD in leaching test eluate and of the black index, are among the tests considered by the international research community for possible utilization for the evaluation of waste biological stability. Good correlations were found for most of the results obtained, proving the reliability of the test methods used. In particular, the effectiveness of biodegradation during waste pretreatment processes can be easily monitored by measuring the respiration index and/or the BOD5 and COD in leaching test eluate; for the characterization of waste from landfills, the use of respiration index can be recommended. In both cases the COD in leaching test eluate may provide additional useful information especially in the case of low values for the respiration index. Moreover, the black index test may be considered with some limits that will be discussed, providing good results in a simple and cost effective way.     

Characterization of Atrazine-Loaded Biodegradable Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Microspheres

Polyhydroxybutyrate-co-hydroxyvalerate microspheres (PHBV-MS) were prepared as a delivery system for the herbicide atrazine (ATZ). Characterization of the system included investigation of in vitro release properties and genotoxicity. ATZ − PHBV-MS particle diameters showed a size distribution range of 1–13 μm. Differential scanning calorimetry analyses indicated that ATZ was associated with the PHBV microparticles. The release profiles showed a different release behavior for the pure herbicide in solution, as compared with that containing ATZ-loaded PHBV-MS. Korsmeyer–Peppas model analyses showed that atrazine release from the microparticles occurred by a combination of diffusion through the matrix and partial diffusion through water-filled pores of the PHBV microparticles. A Lactuca sativa test result showed that the genotoxicity of ATZ-loaded PHBV-MP was decreased in relation to ATZ alone. The results demonstrate a viable biodegradable herbicide release system using atrazine for agrochemical purposes.     

Particulate matter in the indoor and outdoor air of a gymnasium and a fronton

An indoor/outdoor monitoring programme of PM₁₀ was carried out in two sports venues (a fronton and a gymnasium). Levels always below 50 μg m^?3 were obtained in the fronton and outdoor air. Due to the climbing chalk and the constant process of resuspension, concentrations above 150 μg m^?3 were registered in the gymnasium. The chalk dust contributed to CO₃ ^2? concentrations of 32?±?9.4 μg m^?3 in this sports facility, which represented, on average, 18 % of the PM₁₀ mass. Here, the carbonate levels were 128 times higher than those registered outdoors. Much lower concentrations, around 1 μg m^?3, were measured in the fronton. The chalk dust is also responsible for the high Mg²⁺ concentrations in the gym (4.7?±?0.89 μg m^?3), unfolding a PM₁₀ mass fraction of 2.7 %. Total carbon accounted for almost 30 % of PM₁₀ in both indoor spaces. Aerosol size distributions were bimodal and revealed a clear dependence on physical activities and characteristics of the sports facilities. The use of climbing chalk in the gymnasium contributed significantly to the coarse mode. The average geometric mean diameter, geometric standard deviation and total number of coarse particles were 0.77 μm, 2.79 cm^?3 and 28 cm^?3, respectively.