Preliminary investigation on the environmental occurrence and effects of antibiotics used in aquaculture in Italy

A preliminary investigation has been carried out on the occurrence and effects of antibiotics used in Italian aquaculture with the objective of identifying priorities for monitoring programmes. According to the information available on the most pertinent and diffuse fish diseases and their related therapies, the presence of flumequine and oxytetracycline in sediments sampled from two trout farms and three sea-bass farms and in their surrounding environments was selected for an analytical investigation. The concentrations of oxytetracycline and flumequine varied up to a maximum of 246.3 and 578.8 microg/kg d.w., respectively. Flumequine was seen to have the highest toxicity in a bioluminescence assay with EC50 values varying within the range of 12-15 mg/l, while the EC50 values for oxytetracycline were within the range of 121-139 mg/l. The results of the present study indicate flumequine and oxytetracycline as priority chemicals to be monitored for possible environmental side effects of aquaculture in Italy. Apart from peak concentrations the chronic presence of flumequine and oxytetracycline in sediments both inside and outside farms should also be considered. In spite of the potential risks related to the use of antibiotics, the concentrations found in the sediments of the studied fish farms are significantly lower than those found in other areas.     

Projected changes in particulate matter concentrations in the South Coast Air Basin due to basin-wide reductions in nitrogen oxides,volatile organic compounds,and ammonia emissions

An ozone abatement strategy for the South Coast Air Basin (SoCAB) has been proposed by the South Coast Air Quality Management District (SCAQMD) and the California Air Resources Board (ARB). The proposed emissions reduction strategy is focused on the reduction of nitrogen oxide (NO_x) emissions by the year 2030. Two high PM_2.5 concentration episodes with high ammonium nitrate compositions occurring during September and November 2008 were simulated with the Community Multi-scale Air Quality model (CMAQ). All simulations were made with same meteorological files provided by the SCAQMD to allow them to be more directly compared with their previous modeling studies. Although there was an overall under-prediction bias, the CMAQ simulations were within an overall normalized mean error of 50%; a range that is considered acceptable performance for PM modeling. A range of simulations of these episodes were made to evaluate sensitivity to NO_x and ammonia emissions inputs for the future year 2030. It was found that the current ozone control strategy will reduce daily average PM_2.5 concentrations. However, the targeted NO_x reductions for ozone were not found to be optimal for reducing PM_2.5 concentrations. Ammonia emission reductions reduced PM_2.5 and this might be considered as part of a PM_2.5 control strategy.

Implications: The SCAQMD and the ARB have proposed an ozone abatement strategy for the SoCAB that focuses on NO_x emission reductions. Their strategy will affect both ozone and PM_2.5. Two episodes that occurred during September and November 2008 with high PM_2.5 concentrations and high ammonium nitrate composition were selected for simulation with different levels of nitrogen oxide and ammonia emissions for the future year 2030. It was found that the ozone control strategy will reduce maximum daily average PM_2.5 concentrations but its effect on PM_2.5 concentrations is not optimal.     

Pharmaceuticals in the Environment in Italy: Causes, Occurrence, Effects and Control

- DOI: http://dx.doi.org/10.1065/espr2006.01.004 Background, Aim and Scope Environmental contamination by pharmaceuticals is an emerging issue. Until recently, information on medicinal substances released into the environment was scant, but several studies have now been published. Data are, however, usually scattered and a systematic approach to this subject is generally lacking. Moreover, because of differences in the prevalence of diseases, treatment habits and options, or simply for market reasons, the pollution profile can differ significantly in different countries. The aim of this work is to review the papers dealing with environmental contamination by pharmaceuticals in Italy, with the aim of providing a comprehensive view on a national scale. Methods Papers related to environmental contamination by pharmaceuticals in Italy were reviewed, in order to offer a comprehensive view of this subject. Topics included analysis, occurrence, monitoring, modelling, treatment, control of the emissions, and ecotoxicological effects of pharmaceuticals in the environment. Results and Conclusion The literature suggests that pharmaceuticals are widespread contaminants, entering the environment from a myriad of scattered points. Patients, in case of drugs for human use, or animals for veterinary drugs, are the main sources of contamination. Pharmaceuticals can be ranked according to environmental loads, predicted by multiplying sales figures by the rate of metabolism in man or animals. Priority pharmaceuticals, i.e. the molecules of concern for the environment, can be measured in waste and surface water by liquid chromatography-tandem mass spectrometry, and the loads detected are generally comparable to the predicted ones. Pharmaceuticals are designed to stimulate a response in humans and animals at low doses, with a very specific target, so the implications for human health and the environment need to be assessed. In vitro and in vivo studies suggest that pharmaceutical principles, taken singularly or in combinations, and concentrations close to those detected in the environment, may have ecotoxicological effects. The sewage system is an important point in the control of contamination, but sewage treatment plants are not able efficiently to abate a substantial part of water-borne pharmaceuticals. Several variables play a role, however, in the processes of waste water treatment, and could be specifically adjusted to improve the efficiency of drug abatement, mitigating the potential environmental hazards. Recommendation and Perspective Pharmaceuticals in the environment are becoming a subject of global concern, with potential environmental consequences. Further knowledge of the causes, occurrence and effects of drugs as environmental pollutants is necessary for a better understanding of this ecological issue, as well as to improve abatement strategies, and to mitigate subtle environmental consequences.     

Analysis of Mosses and Soils for Quantifying Heavy Metal Concentrations in Sicily: A Multivariate and Spatial Analytical Approach

- DOI: http://dx.doi.org/10.1065/espr2006.01.006 Background The use of vegetal organisms as indicators of contamination of the environment is partially replacing traditional monitoring techniques. Amongst the vegetal organisms available, mosses appear to be good bioindicators and are used for monitoring anthropogenic and natural fall-out on soils. This study has two objectives: the evaluation of the concentrations of heavy metals in soils and mosses of the Sicily Region, in Italy and the identification of the origin of fall-out of heavy metals. Methods Mosses and the surface soil were sampled at 28 sites, only the youngest segments of Hylocomium splendens and Hypnum cupressiforme, corresponding to the plant tissues produced during the last 3 years, were taken. The elements Cd, Cu, Ni, Pb and Zn were analysed by ICP-MS and Hg by AAS. Statistical analysis was by PCA and spatial representation by GIS. Results and Discussion In the mosses sampled in Sicily, the highest concentrations of Cd were found around the cities of Palermo and Messina. The highest concentrations of Hg were recorded in the northern part of the island between Trapani and Messina, similar to the distribution of Cu. Different areas with the highest concentrations of Ni were found near the south coast, in the vicinity of Palermo and around the Volcano Etna. The highest concentrations of Pb were found in the south-west coast near Agrigento, where important chemical plants and petroleum refineries are located. Except for a few locations, Zn fall-out was found to be evenly distributed throughout Sicily. Conclusion The sites where the concentrations of heavy metals cause greatest concern have been revealed by the PCA analysis and portrayed using GIS. Also of some concern is the diffuse and anthropogenic origin of Hg and Cd. The combined approach of using soil and mosses, together with pedological interpretation and application of multivariate statistical techniques has provided valuable insight into the environmental aspects of heavy metal deposition in a region of southern Europe. Recommendations and Outlook Further insight into the deposition of heavy metals will require more detailed sampling of soils and mosses in both new and previous study areas. This needs to be complemented by detailed pedological investigations in the study areas. Future research programmes will address these issues.     

Evaluation of biodegradation kinetic constants for aromatic compounds by means of aerobic batch experiments

Kinetics of aerobic biodegradation have been investigated for twenty aromatic species using sludges collected from the aeration basin of municipal sewage treatment plants. The reproducibility of the results is tested with respect to the sludges period of collection and the wastewater treatment plant where they are taken. The comparison of kinetic constants, estimated for the investigated chemicals, allows to evaluate the reactivity effect of single groups (i.e., -OH, -CH3, -Cl, -NO2) into the aromatic structures. The search for easy structure-reactivity relationships is also attempted by means of contributing group methods.     

Seasonal decline of offspring quality in the European starling Sturnus vulgaris: an immune challenge experiment

In seasonally fluctuating environments, timing of reproduction is a crucial determinant of fitness. Studies of birds show that late breeding attempts generally result in offspring of lower reproductive value, with lower recruitment and long-term survival prospects. Several proximate mechanisms, including a seasonal decline of immune system functioning, may lead to a seasonal decline of offspring fitness. We investigated seasonal variation in offspring quality by subjecting first- and second-brood chicks of a sexually size dimorphic species, the European starling Sturnus vulgaris, to an immune challenge with a bacterial endotoxin (LPS), and evaluated their growth and physiological response in terms of total plasma antioxidant capacity (TAC), concentration of reactive oxygen metabolites and hematocrit. LPS challenge did not affect chick growth or oxidative status. However, hematocrit of second-brood chicks was higher in LPS chicks compared to controls. Body mass halfway through the rearing period (days?8–9 post-hatching), TAC and hematocrit were lower among second- vs. first-brood chicks. Interestingly, sexual dimorphism in body mass at days?8–9 post-hatching markedly differed between broods, first-brood males being 4.7% and second-brood males 22.7% heavier than their sisters, respectively. Pre-fledging mortality occurred among second-brood chicks only and was strongly female-biased. Our findings suggest that starling chicks, even if in poor conditions, are little affected by a bacterial challenge, at least in the short-term. Moreover, our study indicates that sex differences in body size, possibly mediated by sex-specific maternal investment in egg size, may heavily impact on pre-fledging survival in a different way in the course of the breeding season, resulting in sex-specific seasonal decline of offspring fitness. Finally, we suggest that levels of circulating antioxidants should be regarded among the proximate causes of the association between timing of fledging and long-term survival in avian species.     

Ketoprofen Loaded in Natural Rubber Latex Transdermal Patch for Tendinitis Treatment

Ketoprofen is an analgesic with potent anti-inflammatory activity against acute inflammation, subacute inflammation, for the acute and long-term treatment of various inflammatory pathologies, as rheumatoid arthritis and colonic adenocarcinoma. In order to minimize the incidence of systemic events related to ketoprofen, the transdermal drug delivery system development has been most important. The advantages of using natural rubber latex membranes include not only the reduction of adverse systemic events, but also the suitability of the low cost of the material together with its physicochemical properties such as flexibility, mechanical stability, surface porosity and water vapor permeability, and besides being a biocompatible material also presents biological activity to stimulate the angiogenesis, being able to be used in tissue repair. This study demonstrated that ketoprofen was successfully incorporated into natural latex membranes for drug delivery. FTIR indicated that the drug did not interact chemically with the membrane. Moreover, the natural latex membranes released 60% of the ketoprofen incorporated in 50 h. SEM images indicated that a portion of the drug was present on the membrane surface, being this portion responsible for the burst release. The tensile tests showed that the addition of the drug into the natural latex membrane did not influence on the polymer mechanical behavior. In addition, drug-natural latex membranes presented no red blood cell damaging effects. Our data shows that the ketoprofen loaded natural latex membranes is a promising system for sustained drug delivery which can be used to minimize the adverse side effects of high dose systemic drug delivery.     

Techno-economic-environmental characteristics of polyurethane composite to thermal insulation for building with flame resistance: corroborative effect recycled of PVC and aluminum oxide

Journal of Material Cycles and Waste Management - In this article, we present the results of the composite development obtained from polyurethane (PU), polyvinyl chloride (PVC), and aluminum...     

Synthesis and Characterization of a Thin-Film Composite Nanofiltration Membrane Based on Polyamide-Cellulose Acetate: Application for Water Purification

Membrane separation has been widely used for various applications including microfiltration (MF), ultrafiltration (UF), and nanofiltration (NF) processes in the fields of biomedicine, food, and water purification. In this work, a facile synthesis of new polyamide thin-film composite nanofiltration membranes (NF-TFC) for water purification was described. The polyamide thin film was deposed over a synthetic cellulose acetate (CA) support by interfacial polymerization method. 1,3 cyclohexane bis (methylamine) (CHMA) and trimesoyl chloride (TMC) were used as monomers. The membranes were characterized using Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectroscopy (FT-IR), water uptake, porosity, contact angle, water permeability and rejection towards specific salt and dye molecules. The effect of the variation of the CHMA concentration (0.2–2 wt.%) on the morphology, porosity, water permeation and rejection properties of the prepared membranes was studied. SEM results displayed the growth of the membrane thickness when the CHMA concentration increased from 0.2 to 2 wt.%. The strong adhesion between the cellulose acetate substrate and the polyamide layer explained by the formation of the polyamide film in the substrate surface and inside the pores. The water permeability varied from 36.02 to 17.09 L h^?1 m^?2 bar^?1. The salt rejection of Na₂SO₄ and NaCl increased from 9 to 68% and from 38.41% to 89.4%, respectively, when the CHMA concentration was changed from 0.2 to 2 wt.%. The prepared membranes were further applied successfully for the removal of malachite green and congo red. The results indicated that the maximum rejection reached 89% and 85% for malachite green and congo red, respectively.