Biodegradability of Banana and Plantain Cellulose Microfibrils Films in Anaerobic Conditions

Currently, cellulose microfibrils are being investigated as nanofillers for polymers to increase their biodegradability. However, until now there has been no report on their degradability by microorganisms. In this work the anaerobic degradation of cellulose microfibril films extracted from banana and plantain plant rachis residues has been studied. Samples were exposed to burial tests in nature compost during 14?days. Changes due to the degradation process were investigated by techniques as optical microscopy, tensile tests, viscosity measurements, ATR-FTIR spectroscopy, X-ray diffraction and thermogravimetric analysis. Biodegradability was higher for cellulose microfibril films extracted from banana (BCMF) than plantain films (PCMF). Growth of microorganism colonies on BCMF films and just yellowing on PCMF films was observed by microscopic analysis. New bands characteristic of aldehyde functional groups due to the breaking of ??-(1,4)-glycosidic bonds were observed in infrared spectra. This breakage was also responsible for the fall-down of mechanical properties and polymerization degree. X-ray diffraction and thermogravimetric analysis showed that BCMF films were at the first stage of degradation for the used burial test times because the microorganisms only attacked the amorphous cellulose leading to a slight increase in crystallinity. In the case of PCMF films this variation remained practically invariant.     

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C&D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C&D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006–2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C&D waste.     

Cultural shift towards sustainability in the construction industry of Hong Kong

Sustainable development is forward-looking; it is a continuous mission for future developments of human society. A genuinely sustainable society is one that initiates developments in sustainable ways. The development of a genuinely sustainable society is supported by its citizens who think and act according to a recognized code of conduct - the sustainable culture. Similar to other forms of culture, sustainable culture of a society is not static, but changes over time. The changes found in a sustainable culture are reflections of the status of sustainability in a society and these changes should be measured from time to time. The resulting measurement gives very important information for decision-makers, in the government and in the private sector, to examine the magnitude of changes that have taken place in a given period of time. The results will also enable them to review and adjust policies in order to better accommodate changes according to the trends of society.This paper provides a method – the T-model, to investigate and measure the extent of change of sustainable culture through two extensive surveys among participants of the construction industry of Hong Kong. The change in sustainable culture is reflected by the change in attitude and practice among construction participants, this can be found in their performance in project development, design and construction operations. The data of these changes are collected and converted to numerical scores. The T-model synthesized these scores and revealed the change of sustainable culture within the specific study time frame.     

Is legislation a barrier to the sustainable management of game species? A case study of wild deer in Britain

Wild game management for hunting in Western society has become increasingly complex as stakeholders have multiplied and as ‘sustainability’ influences the contemporary debate. This paper questions whether the current legal framework for game management, which has evolved from early European civilisations to focus on ‘hunting rights’, is relevant to regulate the contemporary environmental, social and economic dimensions of wild game and their management. Employing a narrative analysis to focus on deer, the study identifies key legislative tenets and highlights the pertinence of historical laws to contemporary conflicts. The analysis suggests that current legislation is increasingly divergent from contemporary trends and has created inertia with respect to sustainable deer management. The paper offers four options to redress this: state intervention; voluntary collaboration; financial incentives; and establishing a legal responsibility for management. It is concluded that significant innovation is required in one or more of these four areas to facilitate the contemporary sustainable management of wild deer in Britain.     

An innovative approach to inventory and monitoring of natural resources in the Mexican State of Jalisco

This paper discusses the statistical design and estimation processes developed for the assessment of key land resources relevant to questions of their condition and change in the State of Jalisco, Mexico. Some initial results of the first phase of Jalisco's Natural Resource Inventory and Monitoring Program (IMRENAT) conducted in 2006 are presented and discussed. Since this is a relatively new approach for an inventory and monitoring program of this magnitude, designed from the beginning specifically for integration with orbital satellite data, it is anticipated that changes will have to be made over time to improve conceptual and operational design aspects. Alternative remote sensing capabilities to further improve local information, more sophisticated analysis to satisfy the requirements of officials as they become more aware of the capabilities of the system, possible improvements in change assessments over time, and opportunities to focus on specific interesting changes will be assessed. As this study indicates, current and future information technology advancements provide a solid prospect for the development and application of integrative sampling strategies to support sustainability science and management processes.     

Evaluation of the best compromise between the urban air quality monitoring resolution by diffusive sampling and resource requirements

The need to collect data representative of overall urban pollution is all-important in order to monitor the population exposure. High spatial resolution monitoring using diffusive samplers allows studying of the urban pollutant distribution, thus enabling deeper investigation of their generation and diffusion mechanisms. Nevertheless, such a monitoring campaign has a certain cost. In this study we point out how to find the best compromise between the number of necessary measurements and the affordable costs for monitoring campaigns. We also describe an innovative method for the proper design of a fixed urban monitoring network by means of preliminary high spatial resolution campaigns using diffusive samplers. Four European capital cities (Dublin, Madrid, Paris and Rome) were monitored six times, each time for seven days. Benzene, toluene, ethylbenzene, xylenes (BTEX) and NO(2) concentrations were measured at 146 sites in Dublin, 293 in Madrid, 339 in Paris and 290 in Rome. Multiscale grids have been drawn which ranged in mesh size from 500 m to 2 km. The statistical processing of data produced a twofold result: the creation of isoconcentration maps with geostatistical procedures, and an algorithm aimed at locating the minimum number of sampling sites where the fixed monitoring stations should be placed. Average urban levels estimated on the basis of these selected sites differ by less than 8% from those calculated on the whole populations of the sampled points. The aim of this work is to investigate how far the resolution of a monitoring campaign of urban pollution by diffusive sampling can be reduced, thus making the monitoring less expensive in terms of human and financial resources, while preserving the same quality of the results that could be achieved with a higher resolution. We found that there is no significant loss of information when the resolution of the monitoring grid for BTEX is lowered to a mesh size of 1.85 km, that is a sampling site each 3.4 km(2), and that the minimum number of sampling sites to be used is N = 0.29 A, where A is the urban surface to be monitored (in km(2)). As the spatial distribution of NO(2) is less sensitive to the distance from the emission source than that of BTEX, this relationship could be retained as a valid lower limit for the mesh grid size also for NO(2) monitoring.     

Evaluation of Terrestrial and Streamside Salamander Monitoring Techniques at Shenandoah National Park

In response to concerns about amphibian declines, a study evaluating and validating amphibian monitoring techniques was initiated in Shenandoah and Big Bend National Parks in the spring of 1998. We evaluate precision, bias, and efficiency of several sampling methods for terrestrial and streamside salamanders in Shenandoah National Park and assess salamander abundance in relation to environmental variables, notably soil and water pH. Terrestrial salamanders, primarily redback salamanders (Plethodon cinereus), were sampled by searching under cover objects during the day in square plots (10 to 35 m²). We compared population indices (mean daily and total counts) with adjusted population estimates from capture-recapture. Analyses suggested that the proportion of salamanders detected (p) during sampling varied among plots, necessitating the use of adjusted population estimates. However, adjusted population estimates were less precise than population indices, and may not be efficient in relating salamander populations to environmental variables. In future sampling, strategic use of capture-recapture to verify consistency of p's among sites may be a reasonable compromise between the possibility of bias in estimation of population size and deficiencies due to inefficiency associated with the estimation of p. The streamside two-lined salamander (Eurycea bislineata) was surveyed using four methods: leaf litter refugia bags, 1 m² quadrats, 50 × 1 m visual encounter transects, and electric shocking. Comparison of survey methods at nine streams revealed congruent patterns of abundance among sites, suggesting that relative bias among the methods is similar, and that choice of survey method should be based on precision and logistical efficiency. Redback and two-lined salamander abundance were not significantly related to soil or water pH, respectively.     

An ecological function and services approach to total maximum daily load (TMDL) prioritization

Prioritizing total maximum daily load (TMDL) development starts by considering the scope and severity of water pollution and risks to public health and aquatic life. Methodology using quantitative assessments of in-stream water quality is appropriate and effective for point source (PS) dominated discharge, but less so in watersheds with mostly nonpoint source (NPS) related impairments. For NPSs, prioritization in TMDL development and implementation of associated best management practices should focus on restoration of ecosystem physical functions, including how restoration effectiveness depends on design, maintenance and placement within the watershed. To refine the approach to TMDL development, regulators and stakeholders must first ask if the watershed, or ecosystem, is at risk of losing riparian or other ecologically based physical attributes and processes. If so, the next step is an assessment of the spatial arrangement of functionality with a focus on the at-risk areas that could be lost, or could, with some help, regain functions. Evaluating stream and wetland riparian function has advantages over the traditional means of water quality and biological assessments for NPS TMDL development. Understanding how an ecosystem functions enables stakeholders and regulators to determine the severity of problem(s), identify source(s) of impairment, and predict and avoid a decline in water quality. The Upper Reese River, Nevada, provides an example of water quality impairment caused by NPS pollution. In this river basin, stream and wetland riparian proper functioning condition (PFC) protocol, water quality data, and remote sensing imagery were used to identify sediment sources, transport, distribution, and its impact on water quality and aquatic resources. This study found that assessments of ecological function could be used to generate leading (early) indicators of water quality degradation for targeting pollution control measures, while traditional in-stream water quality monitoring lagged in response to the deterioration in ecological functions.     

Analysis of multi-temporal landsat satellite images for monitoring land surface temperature of municipal solid waste disposal sites

This studypresents a remote sensing application of using time series Landsat satellite images for monitoring the Trail Road and Nepean municipal solid waste (MSW) disposal sites in Ottawa, Ontario, Canada. Currently, the Trail Road landfill is in operation; however, during the 1960s and 1980s, the city relied heavily on the Nepean landfill. More than 400 Landsat satellite images were acquired from the US Geological Survey (USGS) data archive between 1984 and 2011. Atmospheric correction was conducted on the Landsat images in order to derive the landfill sites’ land surface temperature (LST). The findings unveil that the average LST of the landfill was always higher than the immediate surrounding vegetation and air temperature by 4 to 10 °C and 5 to 11.5 °C, respectively. During the summer, higher differences of LST between the landfill and its immediate surrounding vegetation were apparent, while minima were mostly found in fall. Furthermore, there was no significant temperature difference between the Nepean landfill (closed) and the Trail Road landfill (active) from 1984 to 2007. Nevertheless, the LST of the Trail Road landfill was much higher than the Nepean by 15 to 20 °C after 2007. This is mainly due to the construction and dumping activities (which were found to be active within the past few years) associated with the expansion of the Trail Road landfill. The study demonstrates that the use of the Landsat data archive can provide additional and viable information for the aid of MSW disposal site monitoring.