Methodologies for estimating disaggregated anthropogenic emissions--application to a coastal Mediterranean region of Spain

Regional estimates of both anthropogenic and biogenic emissions are important inputs for models of atmospheric chemistry. A disaggregated emissions inventory of all relevant pollutants for an area of 100 x 100 km2 centered in Burriana (Castellon, Spain) has been worked out. Time and spatial resolutions were hourly and 1 x 1 km2, respectively. Estimates were made for all relevant sources of anthropogenic emissions. The pollutants considered were SO2, NOx, NMVOCs (nonmethane volatile organic compounds), CH4, CO, CO2, N2O, and NH3. Thus, the emissions inventory includes up to 18 different NMVOCs. Emissions were computed for a typical sunny workday in June when strong photochemical activity could be expected. A "top-down" methodology was applied, taking as a starting point official annual and provincial estimates based on CORINAIR emission factors. This procedure is a very useful tool, particularly for those cases where a lack of sufficient local detailed information about the main emission-generating activities, such as road traffic, makes the use of a "bottom-up" approximation inadvisable. Moreover, updating these emission inventories is easier and they could be used to evaluate the impact of possible abatement strategies.     

Chemical and biological characterization of slaughterhouse wastes compost

The chemical and biological properties of compost made from yard trimmings (YT) composted alone or mixed with slaughterhouse wastes (SHW) were evaluated in seven phases. Mixtures were weighed in a 2:1 proportion (YT:SHW) and placed in composting bins (0.91 m2). Temperature was recorded to determine the time (d) needed to reach the first (1HC) and second heat cycles (2HC). Composting characteristics were measured at 0 d, at the peak of the 1HC and 2HC, and at maturation (0, 20, 50 and 70 d). During 1HC, bacterial isolates were cultivated in both treatments and identified using the Biolog System. Chemical composition was statistically analyzed using a 2 (layers of SHW)x7 (composting phases) factorial arrangement of treatments with the ANOVA procedure of SAS. The pH was neutral for YT and ranged from 7.41 to 6.82 for SHW throughout the process. There was a decrease in organic matter (OM) and carbon (C), and a relative increase in nitrogen (N) in both treatments. At 70 d of maturation, C:N values were similar between treatments, but lower (P>0.05) than the initial values. Final N concentration was higher (P>0.05) for the treatment with SHW. Only the SHW treatment exhibited thermophilic temperatures. At the 1HC in both treatments, different populations of bacteria responsible for the breakdown of OM were identified showing an active heterogeneous population. The presence of pathogenic microorganisms was not detected in treatments containing SHW.     

Temporal analysis of PM10 in Metropolitan Monterrey, México

The Monterrey Metropolitan Area (MMA) is the third largest city in Mexico. Few studies have been carried out regarding its air pollution. The aim of this study was to analyze the temporal behavior of PM10 (particulate matter < or =10 microm in aerodynamic diameter). Data reported by the "Sistema Integral de Monitoreo Ambiental" (Integrated Environmental Monitoring System) network from 2006 to 2008 were used. PM10 levels were compared among the stations by year, season, and day of week. A bootstrap technique was used to obtain subsamples to which Student's t test and ANOVA were applied. PM10 levels were high and exceeded the annual limit of 50 microg/m3 set up by the Mexican standard Norma Oficial Mexicana NOM-025-SSA1-1993. These levels could have serious health effects. The southwest zone of MMA had the highest levels of PM10 during the period studied. Winter was the most polluted season, and summer was the least polluted season. Thursday and Friday were the most polluted days, and Sunday was the least polluted day. The hours with the highest levels of PM10 were 8:00 to 10:00 a.m., whereas nighttime hours were the cleanest.     

Bioaccumulation and elimination of 14C-lindane by Enchytraeus albidus in artificial (OECD) and a natural soil

Bioaccumulation and elimination of 14C-lindane in Enchytraeus albidus was studied in artificial OECD soil and a silty loam from an agricultural field in Central West Portugal. Results showed that enchytraeids were able to bioaccumulate the chemical with a kinetic pattern similar to that of earthworms: fast uptake within a few days and a biphasic elimination pattern. A 10 day period to study uptake was sufficient, but a few more days were probably necessary for elimination. Bioaccumulation was influenced by soil type. The authors suggest that higher organic matter (OM) content and also the higher content on sand particles in the OECD soil may have led to a faster elimination: hydrophobic chemicals tend to adsorb to OM being in this way less bioavailable and therefore less bioaccumulated having bioaccumulation factor value around 6 while in natural soil is 10; the sand could act as abrasive particles (helpers) in the elimination process leading to an elimination of 90% of the chemical in two days while in natural soil 67% was eliminated in the same period of time.     

Bioavailability and plant accumulation of heavy metals and phosphorus in agricultural soils amended by long-term application of sewage sludge

Amendment of agricultural soils with municipal sewage sludges provides a valuable source of plant nutrients and organic matter. Nevertheless, addition of heavy metals and risks of eutrophication continue to be of concern. Metal behaviour in soils and plant uptake are dependent on the nature of the metal, sludge/soil physico-chemical properties and plant species. A pot experiment was carried out to evaluate plant production and heavy metal uptake, soil heavy metal pools and bioavailability, and soil P pools and possible leaching losses, in agricultural soils amended with sewage sludge for at least 10 years (F20) compared to non-amended soils (control). Sewage sludge application increased soil pH, N, Olsen-extractable-P, DOC and exchangeable Ca, Mg and K concentrations. Total and EDTA-extractable soil concentrations of Cu and Zn were also significantly greater in F20, and soil metal (Cu, Mn and Zn) and P fractionation altered. Compared to the control, in F20 relative amounts of acid-extractable (Mn, Zn), reducible (Mn, Zn) and oxidisable (Cu, Zn) metal fractions were greater, and a dominance of inorganic P forms was observed. Analyses of F20 soil solutions highlighted risks of PO4 and Cu leaching. However, despite the observed increases in metal bioavailability sewage sludge applications did not lead to an increase in plant shoot concentrations (in wild plants or crop species). On the contrary, depending on the plant species, Mn and Zn tissue concentrations were within the deficiency level for most plants.     

Lichens as indicators of a perturbation/stability gradient in the Asperillo dunes, SW spain

In the asperillo dune system, Southwest Spain, lichen vegetation covering the dune sand, has a low species diversity but is an important component of the perennial vegetation, providing stability, nutrients, and moisture to the soil layer. The Asperillo dunes harbour (1) natural ecosystems, (2) disturbed systems affected by forestry activities where the natural vegetation is eliminated, and (3) pine forest resulting from afforestation withPinus pinea since the end of the 1940s where the composition and abundance of the lichen flora has been drastically changed. Our hypothesis was that the lichen species composition and distribution are influenced by the type and period of human intervention. To test this hypothesis a 1.2 km × 1.1 km area, which includes zones with different degrees of conservation and perturbation, consisting of five different habitats, was selected: well preservedJuniperus woodland,Pinus pinea plantations with dense scrub, dense scrub,P. pinea plantations cleared from scrub, and pioneer scrub in recent pine afforestation. In each area, randomly located 5m × 5 m homogeneous plots were sampled. In each plot the cover of shrub and lichen species was recorded. The first results show that lichen cover is higher in the most preserved areas,Cladonia mediterranea being the dominant species under theJuniperus phoenicea canopy. The lichen community changes in composition and abundance depending on the time elapsed since the last perturbation.     

广州市菜园土和蔬菜中镉含量水平及污染评价

探讨了广州市各区、市菜园土和蔬菜中的重金属Cd污染状况,测定了95份土壤样品以及292份蔬菜样品中的镉含量,并对广州市各区市菜园土中Cd污染程度进行了评价。研究结果表明,不同种类的蔬菜中,叶菜类对重金属Cd的吸收和富集较高,瓜豆类较低。蔬菜中重金属Cd的含量受土壤中Cd含量的影响。与国内其它城市相比,广州市蔬菜地土壤中的Cd平均含量处于较高水平;蔬菜则以海珠、番禺两区Cd含量相对较高,高于其它城市的含量水平。     

Determination of protective effect of carob (Ceratonia siliqua L.) extract against cobalt(II) nitrate-induced toxicity

Environmental Science and Pollution Research - Cobalt (Co) is widely used in many industrial fields such as batteries and paints. Cobalt, a dangerous heavy metal, can be found in high...     

Eco-efficiency in Portuguese companies of marble sector

The activities developed within an eco-efficiency project in mineral industries located in the largest area for marble extraction in Portugal, in Alentejo region, in the Estremoz – Borba and Vila Viçosa anticline are presented in this paper. The project was designed to apply the sustainability concept in seven companies of marble extraction and transformation. The adopted strategy used new cleaner production models together with sustainable value (SV) improvement, leading to the rationalization of the industrial process, the involvement of economic agents and the orientation of the management of production processes towards eco-efficiency. The challenge was to have the mineral industry managing efficiently the resources on which the business depends, according to sustainability principles. Different opportunities for improvement, related to the minimization of materials, water and energy use, were identified in the companies. Some proposals mainly related to social improvement and small and medium-sized enterprise competitiveness benefits were also selected and discussed. This approach allows the integration of sustainability at company's and region's levels by combining in the entrepreneurial activity the creation of wealth together with the environment protection and the achieving of social benefits. Highlights: The involvement of different stakeholders in the project (Eco-efficiency in Portuguese companies of marble sector) was positive in the discussion and search of solutions for companies. It is possible to involve marble extraction and processing companies in eco-efficiency improvement towards sustainability. Companies from the marble sector improved environmental and social performance and reduced the costs of their production processes by applying SV methodology.