An explanation of the behavioral origin of moderation in the use of natural resources: a meta-synthesis study

Environment Systems and Decisions - Natural resources are a type of good whose individual utility maximization is not desirable, as it could lead to their depletion. This problem, raised several...     

Radon in indoor air of primary schools: determinant factors,their variability and effective dose

Radon is a radioactive gas, abundant in granitic areas, such as in the city of Porto at the north-east of Portugal. This gas is a recognized carcinogenic agent, being appointed by the World Health Organization as the leading cause of lung cancer after smoking. The aim of this preliminary survey was to determine indoor radon concentrations in public primary schools, to analyse the main factors influencing their indoor concentration levels and to estimate the effective dose in students and teachers in primary schools. Radon concentrations were measured in 45 classrooms from 13 public primary schools located in Porto, using CR-39 passive radon detectors for about 2-month period. In all schools, radon concentrations ranged from 56 to 889 Bq/m³ (mean = 197 Bq/m³). The results showed that the limit of 100 Bq/m³ established by WHO IAQ guidelines was exceeded in 92 % of the measurements, as well as 8 % of the measurements exceeded the limit of 400 Bq/m³ established by the national legislation. Moreover, the mean annual effective dose was calculated as 1.25 mSv/y (ranging between 0.58 and 3.07 mSv/y), which is below the action level (3–10 mSv). The considerable variability of radon concentration observed between and within floors indicates a need to monitor concentrations in several rooms for each floor. A single radon detector for each room can be used, provided that the measurement error is considerably lower than variability of radon concentration between rooms. The results of the present survey will provide useful baseline data for adopting safety measures and dealing effectively with radiation emergencies. In particular, radon remediation techniques should be used in buildings located in the highest radon risk areas of Portugal. The results obtained in the current study concerning radon levels and their variations will be useful to optimize the design of future research surveys.     

Simulations of the flow in the Mahakam river–lake–delta system,Indonesia

Large rivers often present a river–lake–delta system, with a wide range of temporal and spatial scales of the flow due to the combined effects of human activities and various natural factors, e.g., river discharge, tides, climatic variability, droughts, floods. Numerical models that allow for simulating the flow in these river–lake–delta systems are essential to study them and predict their evolution under the impact of various forcings. This is because they provide information that cannot be easily measured with sufficient temporal and spatial detail. In this study, we combine one-dimensional sectional-averaged (1D) and two-dimensional depth-averaged (2D) models, in the framework of the finite element model SLIM, to simulate the flow in the Mahakam river–lake–delta system (Indonesia). The 1D model representing the Mahakam River and four tributaries is coupled to the 2D unstructured mesh model implemented on the Mahakam Delta, the adjacent Makassar Strait, and three lakes in the central part of the river catchment. Using observations of water elevation at five stations, the bottom friction for river and tributaries, lakes, delta, and adjacent coastal zone is calibrated. Next, the model is validated using another period of observations of water elevation, flow velocity, and water discharge at various stations. Several criteria are implemented to assess the quality of the simulations, and a good agreement between simulations and observations is achieved in both calibration and validation stages. Different aspects of the flow, i.e., the division of water at two bifurcations in the delta, the effects of the lakes on the flow in the lower part of the system, the area of tidal propagation, are also quantified and discussed.     

Sustainable development in the BRICS countries: an efficiency analysis by data envelopment

There is much concern about the social and environmental impacts caused by the economic growth of nations. Thus, to evaluate the socio-economic performance of nations, economists have increasingly addressed matters related to social welfare and the environment. It is within the scope of this context that this work discusses the performance of countries in the BRICS group regarding sustainable development. The objective of this study regards evaluating the efficiency of these countries in transforming productive resources and technological innovation into sustainable development. The proposed objective was achieved by using econometric tools as well as the data envelopment analysis method to then create economic, environmental, and social efficiency rankings for the BRICS countries, which enabled to carry out comparative analyses on the sustainable development of those countries. The results of such assessments can be of interest for more specific scientific explorations.     

Quantifying the effect of wind on internal wave resonance in Lake Villarrica,Chile

Lake Villarrica, located in south central Chile, has a maximum depth of 167 m and a maximum fetch of about 20 km. The lake is monomictic, with a seasonal thermocline located at a depth of approximately 20 m. Field data show the presence of basin-scale internal waves that are forced by daily winds and affected by Coriolis acceleration. A modal linear and non-linear analysis of internal waves has been used, assuming a two-layer system. The numerical simulations show good agreement with the internal wave field observations. The obtained modes were used to study the energy dissipation within the system, which is necessary to control the amplitude growth. Field data and numerical simulations identify (1) the occurrence of a horizontal mode 1 Kelvin wave, with a period of about a day that coincides with the frequency of daily winds, suggesting that this mode of the Kelvin waves is in a resonant state (subject to damping and controlled by frictional effects in the field) and (2) the presence of higher-frequency internal waves, which are excited by non-linear interactions between basin-scale internal waves. The non-linear simulation indicates that only 10 % of the dissipation rate of the Kelvin wave is because of bottom friction, while the rest 90 % represents the energy that is radiated from the Kelvin wave to other modes. Also, this study shows that modes with periods between 5 and 8 h are excited by non-linear interactions between the fundamental Kelvin wave and horizontal Poincaré-type waves. A laboratory study of the resonant interaction between a periodic forcing and the internal wave field response has also been performed, confirming the resonance for the horizontal mode 1 Kelvin wave.     

Layer-by-Layer Deposition of Antibacterial Polyelectrolytes on Cotton Fibres

The introduction of molecules with biological properties on textile materials is essential for a number of biotechnological applications. With the purpose of testing new processes applied to textiles, in this study, we present the first results on the feasibility of using the Layer-by-Layer (LbL) deposition process in natural fibers such as cotton, with natural polyelectrolytes like chitosan (CH) and alginic acid sodium salt (ALG), the durability of CH/ALG multilayer on cotton were evaluated. The increase of negative charges to the substrate cotton was made with NaBr and TEMPO, to ensure the success of the process of LbL. Three characterization methods to assess electrostatic LbL deposition were performed: the contact angle between a liquid (water) and the sample surface, in order to characterize the wettability of the samples with the different layers of CH and ALG; dyeing of the CH/ALG assembled cotton fabric with cationic methylene blue that shows regular changes in terms of color depth (K/S value), which indicate that the surface were alternately deposited with CH and ALG layers and, finally, the analysis by infrared spectroscopy using Fourier Transform with Attenuated Total Reflection (ATR-FTIR), to assess the changes in the interaction between CH and ALG deposited on cotton samples.     

Quantitative assessment of the differential coastal vulnerability associated to oil spills

The risk associated with a given hazard (natural or technological) generally results from the interaction between the hazard potential and the vulnerability. This paper is centred on the assessment of the vulnerability variable. A quantitative vulnerability assessment and mapping methodology is proposed, with two main specificities: (1) it is hazard- and spatially-centred (respectively, oil spills and coastal areas) and; (2) the spatial segregation level used is the municipality. Due to the geographic context of the Portuguese mainland coast, the proposed methodology was applied in an attempt to illustrate the spatial distribution and the degree of the vulnerability associated to oil spills for mainland Portugal coastal municipalities. A final map is presented together with other informative elements. Analysis and discussion of the results allows for the understanding that: (1) there is a very heterogeneous and differential distribution of the degree of vulnerability to oil spills along the Portuguese coastline; (2) the application of specific hazard-centred and spatially-centred vulnerability assessment methodologies, comprising multi-dimensional indicators (e.g., geographic, ecological, demographic, social and economic), produces more robust and realistic results, highlighted by a thorough and spatially detailed analysis; and (3) future research is required on vulnerability assessment in Portugal; along side, hazard potential assessment methodologies must also be developed in order to create a final risk profile, which can be an extremely useful tool in spatial planning and management.     

Ecological drivers of group living in two populations of the communally rearing rodent, Octodon degus

Intraspecific variation in sociality is thought to reflect a trade-off between current fitness benefits and costs that emerge from individuals' decision to join or leave groups. Since those benefits and costs may be influenced by ecological conditions, ecological variation remains a major, ultimate cause of intraspecific variation in sociality. Intraspecific comparisons of mammalian sociality across populations facing different environmental conditions have not provided a consistent relationship between ecological variation and group-living. Thus, we studied two populations of the communally rearing rodent Octodon degus to determine how co-variation between sociality and ecology supports alternative ecological causes of group living. In particular, we examined how variables linked to predation risk, thermal conditions, burrowing costs, and food availability predicted temporal and population variation in sociality. Our study revealed population and temporal variation in total group size and group composition that covaried with population and yearly differences in ecology. In particular, predation risk and burrowing costs are supported as drivers of this social variation in degus. Thermal differences, food quantity and quality were not significant predictors of social group size. In contrast to between populations, social variation within populations was largely uncoupled from ecological differences.