Validation of a questionnaire about the perception of occupational biohazard in Spanish companies

Objectives. The aim of this work was to develop, validate and test a new questionnaire to assess the biological risk in workers with intentional or unintentional exposure to biological agents. Methods. A questionnaire including 34 questions was developed to study the perception of workers against occupational biohazard. Content Validity Index (CVI) and Content Validity Ratio (CVR) were calculated for the analysis of content validity. A pilot study was carried out with 60 workers from 17 companies performing analysis of Cronbach's α to assess the internal consistency or reliability. Results. A total of 518 workers from 51 Spanish companies in which there is exposure to biological agents participated in the study yielding a response rate of 90%. The final questionnaire obtained a Cronbach's α > 0.759 with a stable test–retest result. The questionnaire validation demonstrates that it could be used to evaluate the biological risks and help the prevention of occupational accidents and diseases. Discussion. This study has validated the need to evaluate worker's perception against occupational risks, as well as the application of prevention methods and protective equipment. It is a first step towards developing an occupational biohazards assessment method including all the requirements set by the European Health and Safety Strategy 2013–2020.     

Nitrogen deposition in Mediterranean forests

Atmospheric deposition of inorganic nitrogen was studied at two forested sites in the Montseny mountains (northeast Spain), peripheral to the Barcelona conurbation, and at a nearby lowland town, using bulk deposition, wet-only deposition, throughfall, and dry deposition inferred from branch-washes and surrogate surfaces (metacrylate plates). Bulk deposition inputs of ammonium and nitrate did not show significant temporal trends over a 16-year period. Bulk inputs of inorganic N were moderate, ranging from 6 to 10 kg N ha(-1) year(-1) depending on the time period considered and the degree of site exposure to polluted air masses from the Barcelona conurbation. Large dry-sedimented particles played a minor role, since wet-only inputs were virtually identical to bulk inputs. On the contrary, branch- and plate-washes indicated substantial dry inputs of N gases and small particles. Total atmospheric deposition was estimated at 15-22 kg N ha(-1) year(-1), most of it being retained within the studied broadleaved evergreen forests. Ecosystem N availability is thus likely to be increasing in these forests.     

Carbon monoxide concentration forecasting in Santiago, Chile

In the city of Santiago, Chile, air quality is defined in terms of particulate matter with an aerodynamic diameter < or = 10 microm (PM10) concentrations. An air quality forecasting model based on past concentrations of PM10 and meteorological conditions currently is used by the metropolitan agency for the environment, which allows restrictions to emissions to be imposed in advance. This model, however, fails to forecast between 40 and 50% of the days considered to be harmful for the inhabitants every year. Given that a high correlation between particulate matter and carbon monoxide (CO) concentrations is observed at monitoring stations in the city, a model for CO concentration forecasting would be a useful tool to complement information about expected air quality in the city. Here, the results of a neural network-based model aimed to forecast maximum values of the 8-hr moving average of CO concentrations for the next day are presented. Forecasts from the neural network model are compared with those produced with linear regressions. The neural network model seems to leave more room to adjust free parameters with 1-yr data to predict the following year's values. We have worked with 3 yr of data measured at the monitoring station located in the zone with the worst air quality in the city of Santiago, Chile.     

Bus fleet emissions: new strategies for mitigation by adopting natural gas

Energy consumption is related to local, regional and global impacts. Thus, by comparing different replacement scenarios of diesel vehicles with compressed natural gas, this article estimates pollutants and greenhouse gases emission in the city of São Paulo, Brazil. The calculation of fuel consumption is based on fleet characteristics, in terms of vehicle age, the average annual distance travelled by bus depending on the year and average fuel consumption. These values served as a basis to develop scenarios considering that a percentage of new vehicles that will be phased out and replaced with ones running on natural gas. Results show that the total avoided emissions can range from 579 thousand tons to 1.375 million tons of carbon dioxide (CO₂₎ over 20 years, depending on the scenario. For particulate matter, accumulated avoided emissions vary from 251 thousand to 584 tons over 20 years. The replacement of diesel buses with natural gas-fuelled buses presents favourable results, in comparison with the tendency scenario for CO₂ and particulate matter. Thus, a public policy for fuel replacement in largest cities, such as Sao Paulo, has an important global impact, especially when allowing the introduction of a renewable energy source, such as biogas. It will benefit from the natural gas previous infrastructure, which is largely available in Brazil. As recommendations, we explain the need to review the city of Sao Paulo Climate Change Law to allow the use of natural gas. Fuel replacement should be integrated with a public policy/public policies and operational strategies to promote citizens´ health as well as historical, cultural and heritage conservation for the city and its future generations.     

Comparison of absorption rates and absorption capacity of ammonia solvents with MEA and MDEA aqueous blends for CO2 capture

In this work we present the experimental results of absorption rates and absorption capacity for the CO₂ absorption by ammonia (NH₃) aqueous solutions. Experiments are carried out in a thermoregulated Lewis-type cell reactor and are achieved in temperature and concentration ranges of 278–303 K and 2–5wt.% NH₃ respectively. The obtained values for absorption kinetic rates and absorption capacity are compared with those available for alkanolamine solvents, commonly used to absorb CO₂. In order to achieve this comparison, data available in studies about alkanolamine solvents at 303–333 K and 5–50wt.% for alkanolamines solutions were considered. Results show that CO₂ absorption by NH₃ is faster than the one carried out by MDEA, except for 2wt.% NH₃ at 288 K. At 278 K and using aqueous solutions of 3wt.% NH₃, the absorption rate is almost identical to the one reached with MDEA solvent. The highest absorption capacity, also compared with alkanolamine solution, is reached with aqueous solutions of 5wt.% NH₃ at 278 K and 303 K.     

Lessons learned for a more efficient knowledge and technology transfer to South American countries in the fields of solid waste and contaminated sites management.

The present paper describes the development, performance and conclusions derived from three know-how and technology transfer projects to South American countries. The first project comprised a collaborative study by European and South American universities to find sustainable solutions for Chilean and Ecuadorian leather tanneries which had underachieving process performances. The second project consisted of investigations carried out in a Brazilian municipality to enhance its municipal solid waste management system. The final collaborative programme dealt with the initial identification, evaluation and registration of suspected contaminated sites in an industrial region of Chile. The detailed objectives, methods and procedures applied as well as the results and conclusions obtained in each of the three mentioned projects are presented, giving special attention to the organizational aspects and to the practical approach of each programme, concluding with their main advantages and disadvantages for identifying a set of qualitative and quantitative suggestions, and to establish transferable methods for future applications.