Hazardous bauxite red mud and ferrous slag management to produce sustainable construction materials

Journal of Material Cycles and Waste Management - This paper reports the development and characterization of new ceramics from hazardous bauxite red mud (50...     

Importance of conserving large and old trees to continuity of tree-related microhabitats

Protecting structural features, such as tree-related microhabitats (TreMs), is a cost-effective tool crucial for biodiversity conservation applicable to large forested landscapes. Although the development of TreMs is influenced by tree diameter, species, and vitality, the relationships between tree age and TreM profile remain poorly understood. Using a tree-ring-based approach and a large data set of 8038 trees, we modeled the effects of tree age, diameter, and site characteristics on TreM richness and occurrence across some of the most intact primary temperate forests in Europe, including mixed beech and spruce forests. We observed an overall increase in TreM richness on old and large trees in both forest types. The occurrence of specific TreM groups was variably related to tree age and diameter, but some TreM groups (e.g., epiphytes) had a stronger positive relationship with tree species and elevation. Although many TreM groups were positively associated with tree age and diameter, only two TreM groups in spruce stands reacted exclusively to tree age (insect galleries and exposed sapwood) without responding to diameter. Thus, the retention of trees for conservation purposes based on tree diameter appears to be a generally feasible approach with a rather low risk of underrepresentation of TreMs. Because greater tree age and diameter positively affected TreM development, placing a greater emphasis on conserving large trees and allowing them to reach older ages, for example, through the establishment of conservation reserves, would better maintain the continuity of TreM resource and associated biodiversity. However, this approach may be difficult due to the widespread intensification of forest management and global climate change.     

Comparison of absorption rates and absorption capacity of ammonia solvents with MEA and MDEA aqueous blends for CO2 capture

In this work we present the experimental results of absorption rates and absorption capacity for the CO₂ absorption by ammonia (NH₃) aqueous solutions. Experiments are carried out in a thermoregulated Lewis-type cell reactor and are achieved in temperature and concentration ranges of 278–303 K and 2–5wt.% NH₃ respectively. The obtained values for absorption kinetic rates and absorption capacity are compared with those available for alkanolamine solvents, commonly used to absorb CO₂. In order to achieve this comparison, data available in studies about alkanolamine solvents at 303–333 K and 5–50wt.% for alkanolamines solutions were considered. Results show that CO₂ absorption by NH₃ is faster than the one carried out by MDEA, except for 2wt.% NH₃ at 288 K. At 278 K and using aqueous solutions of 3wt.% NH₃, the absorption rate is almost identical to the one reached with MDEA solvent. The highest absorption capacity, also compared with alkanolamine solution, is reached with aqueous solutions of 5wt.% NH₃ at 278 K and 303 K.     

Water — and nutrient and energy — systems in urbanizing watersheds

Driven by considerations of sustainability, it has become increasingly difficult over the past 15?C20 years ?? at least intellectually ?? to separate out the water infrastructure and water metabolism of cities from their intimately inter-related nutrient and energy metabolisms. Much of the focus of this difficulty settles on the wastewater component of the city??s water infrastructure and its associated fluxes of nutrients (N, P, C, and so on). Indeed, notwithstanding the massive volumes of these materials flowing into and out of the city, the notion of an urban nutrient infrastructure is conspicuous by its absence. Likewise, we do not tend to discuss, or conduct research into, ??soilshed?? agencies, or soilshed management, or Integrated Nutrient Resources Management (as opposed to its most familiar companion, Integrated Water Resources Management, or IWRM). The paper summarizes some of the benefits (and challenges) deriving from adopting this broader, multi-sectoral ??systems?? perspective on addressing water-nutrient-energy systems in city-watershed settings. Such a perspective resonates with the growing interest in broader policy circles in what is called the ??water-food-energy security nexus??. The benefits and challenges of our Multi-sectoral Systems Analysis (MSA) are illustrated through computational results from two primary case studies: Atlanta, Georgia, USA; and London, UK. Since our work is part of the International Network on Cities as Forces for Good in the Environment (CFG; see www.cfgnet.org), in which other case studies are currently being initiated ?? for example, on Kathmandu, Nepal ?? we close by reflecting upon these issues of water-nutrient-energy systems in three urban settings with quite different styles and speeds of development.     

A ‘coastal-hazard GIS’ for Sri Lanka

Following the 2004 tsunami disaster in Sri Lanka, it was apparent that mapping the coast’s vulnerability was essential for future protection of the local populations. We therefore developed a prototype ‘Coastal-hazard GIS’ for Sri Lanka so as to provide an effective tool for decision makers to limit the impact of natural coastal hazards such as sea level rise, tsunamis, storm surges and coastal erosion, and thus protect the exposed assets (population, property, settlements, communications networks, etc.). The prototype was developed on a pilot site in Galle through building up homogeneous data on the land/sea interface from studies conducted on the exposure of the coastal populations, the aim being to enable an evaluation of the hazards combined with the vulnerability and thus an analysis of the risks. Coastal risk scenarios are developed so as to estimate the impacts and consequences of an event (tsunami, storm, etc.) on the assets, the principle behind this being that if, in general, the coastal hazard cannot be decreased, then a better knowledge of it through simulation should make it possible to limit the vulnerability and thus the risk. The Coastal-hazard GIS will also provide a planning tool in terms of locating new settlements, expanding urban areas, siting coastal protection works, etc.     

Adaptive prey behavior and the dynamics of intraguild predation systems

Intraguild predation constitutes a widespread interaction occurring across different taxa, trophic positions and ecosystems, and its endogenous dynamical properties have been shown to affect the abundance and persistence of the involved populations as well as those connected with them within food webs. Although optimal foraging decisions displayed by predators are known to exert a stabilizing influence on the dynamics of intraguild predation systems, few is known about the corresponding influence of adaptive prey decisions in spite of its commonness in nature. In this study, we analyze the effect that adaptive antipredator behavior exerts on the stability and persistence of the populations involved in intraguild predation systems. Our results indicate that adaptive prey behavior in the form of inducible defenses act as a stabilizing mechanism and show that, in the same direction that adaptive foraging, enhances the parameter space in which species can coexist through promoting persistence of the IG-prey. At high levels of enrichment, the intraguild predation system exhibits unstable dynamics and zones of multiples attractors. In addition, we show that the equilibrium density of the IG-predator could be increased at intermediate values of defense effectiveness. Finally we conclude that adaptive prey behavior is an important mechanism leading to species coexistence in intraguild predation systems and consequently enhancing stability of food webs.     

Nitrogen deposition in Mediterranean forests

Atmospheric deposition of inorganic nitrogen was studied at two forested sites in the Montseny mountains (northeast Spain), peripheral to the Barcelona conurbation, and at a nearby lowland town, using bulk deposition, wet-only deposition, throughfall, and dry deposition inferred from branch-washes and surrogate surfaces (metacrylate plates). Bulk deposition inputs of ammonium and nitrate did not show significant temporal trends over a 16-year period. Bulk inputs of inorganic N were moderate, ranging from 6 to 10 kg N ha(-1) year(-1) depending on the time period considered and the degree of site exposure to polluted air masses from the Barcelona conurbation. Large dry-sedimented particles played a minor role, since wet-only inputs were virtually identical to bulk inputs. On the contrary, branch- and plate-washes indicated substantial dry inputs of N gases and small particles. Total atmospheric deposition was estimated at 15-22 kg N ha(-1) year(-1), most of it being retained within the studied broadleaved evergreen forests. Ecosystem N availability is thus likely to be increasing in these forests.     

Carbon monoxide concentration forecasting in Santiago, Chile

In the city of Santiago, Chile, air quality is defined in terms of particulate matter with an aerodynamic diameter < or = 10 microm (PM10) concentrations. An air quality forecasting model based on past concentrations of PM10 and meteorological conditions currently is used by the metropolitan agency for the environment, which allows restrictions to emissions to be imposed in advance. This model, however, fails to forecast between 40 and 50% of the days considered to be harmful for the inhabitants every year. Given that a high correlation between particulate matter and carbon monoxide (CO) concentrations is observed at monitoring stations in the city, a model for CO concentration forecasting would be a useful tool to complement information about expected air quality in the city. Here, the results of a neural network-based model aimed to forecast maximum values of the 8-hr moving average of CO concentrations for the next day are presented. Forecasts from the neural network model are compared with those produced with linear regressions. The neural network model seems to leave more room to adjust free parameters with 1-yr data to predict the following year's values. We have worked with 3 yr of data measured at the monitoring station located in the zone with the worst air quality in the city of Santiago, Chile.     

Lessons learned for a more efficient knowledge and technology transfer to South American countries in the fields of solid waste and contaminated sites management.

The present paper describes the development, performance and conclusions derived from three know-how and technology transfer projects to South American countries. The first project comprised a collaborative study by European and South American universities to find sustainable solutions for Chilean and Ecuadorian leather tanneries which had underachieving process performances. The second project consisted of investigations carried out in a Brazilian municipality to enhance its municipal solid waste management system. The final collaborative programme dealt with the initial identification, evaluation and registration of suspected contaminated sites in an industrial region of Chile. The detailed objectives, methods and procedures applied as well as the results and conclusions obtained in each of the three mentioned projects are presented, giving special attention to the organizational aspects and to the practical approach of each programme, concluding with their main advantages and disadvantages for identifying a set of qualitative and quantitative suggestions, and to establish transferable methods for future applications.     

Amazon River dissolved load: temporal dynamics and annual budget from the Andes to the ocean

The aim of the present study is to estimate the export fluxes of major dissolved species at the scale of the Amazon basin, to identify the main parameters controlling their spatial distribution and to identify the role of discharge variability in the variability of the total dissolved solid (TDS) flux through the hydrological cycle. Data are compiled from the monthly hydrochemistry and daily discharge database of the “Programa Climatologico y Hidrologico de la Cuenca Amazonica de Bolivia” (PHICAB) and the HYBAM observatories from 34 stations distributed over the Amazon basin (for the 1983–1992 and 2000–2012 periods, respectively). This paper consists of a first global observation of the fluxes and temporal dynamics of each geomorphological domain of the Amazon basin. Based on mean interannual monthly flux calculations, we estimated that the Amazon basin delivered approximately 272?×?10⁶ t year^?1 (263–278) of TDS during the 2003–2012 period, which represents approximately 7 % of the continental inputs to the oceans. This flux is mainly made up by HCO₃, Ca and SiO₂, reflecting the preferential contributions of carbonate and silicate chemical weathering to the Amazon River Basin. The main tributaries contributing to the TDS flux are the Marañon and Ucayali Rivers (approximately 50 % of the TDS production over 14 % of the Amazon basin area) due to the weathering of carbonates and evaporites drained by their Andean tributaries. An Andes–sedimentary area–shield TDS flux (and specific flux) gradient is observed throughout the basin and is first explained by the TDS concentration contrast between these domains, rather than variability in runoff. This observation highlights that, under tropical context, the weathering flux repartition is primarily controlled by the geomorphological/geological setting and confirms that sedimentary areas are currently active in terms of the production of dissolved load. The log relationships of concentration vs discharge have been characterized over all the studied stations and for all elements. The analysis of the slope of the relationship within the selected contexts reveals that the variability in TDS flux is mainly controlled by the discharge variability throughout the hydrological year. At the outlet of the basin, a clockwise hysteresis is observed for TDS concentration and is mainly controlled by Ca and HCO₃ hysteresis, highlighting the need for a sampling strategy with a monthly frequency to accurately determine the TDS fluxes of the basin. The evaporite dissolution flux tends to be constant, whereas dissolved load fluxes released from other sources (silicate weathering, carbonate weathering, biological and/or atmospheric inputs) are mainly driven by variability in discharge. These results suggest that past and further climate variability had or will have a direct impact on the variability of dissolved fluxes in the Amazon. Further studies need to be performed to better understand the processes controlling the dynamics of weathering fluxes and their applicability to present-day concentration–discharge relationships at longer timescales.