An Intelligent Emissions Controller for Fuel Lean Gas Reburn in Coal-Fired Power Plants

ABSTRACT

The application of artificial intelligence techniques for performance optimization of the fuel lean gas reburn (FLGR) system is investigated. A multilayer, feedforward artificial neural network is applied to model static nonlinear relationships between the distribution of injected natural gas into the upper region of the furnace of a coal-fired boiler and the corresponding oxides of nitrogen (NO_x) emissions exiting the furnace. Based on this model, optimal distributions of injected gas are determined such that the largest NO_x reduction is achieved for each value of total injected gas. This optimization is accomplished through the development of a new optimization method based on neural networks. This new optimal control algorithm, which can be used as an alternative generic tool for solving multidimensional nonlinear constrained optimization problems, is described and its results are successfully validated against an off-the-shelf tool for solving mathematical programming problems. Encouraging results obtained using plant data from one of Commonwealth Edison's coal-fired electric power plants demonstrate the feasibility of the overall approach.

Preliminary results show that the use of this intelligent controller will also enable the determination of the most cost-effective operating conditions of the FLGR system by considering, along with the optimal distribution of the injected gas, the cost differential between natural gas and coal and the open-market price of NO_x emission credits. Further study, however, is necessary, including the construction of a more comprehensive database, needed to develop high-fidelity process models and to add carbon monoxide (CO) emissions to the model of the gas reburn system.     

Comparative effect of thymol or its glucose conjugate,thymol-β-d-glucopyranoside,on Campylobacter in avian gut contents

Campylobacter jejuni is an important human food-borne pathogen that can contaminate meat and poultry during processing. Consequently, strategies are sought to reduce the carriage of C. jejuni in food animals before they arrive at the abattoir. Thymol is a natural product that reduces survivability of Campylobacter in vitro, but its rapid absorption from the proximal alimentary tract limits its bactericidal efficacy in vivo. Thymol-β-d-glucopyranoside is more resistant to absorption than free thymol, but its administration to chickens has not been reported. In the present studies, 1 mM thymol-β-d-glucopyranoside was shown to exhibit near equal anti-Campylobacter activity as 1 mM thymol when incubated anaerobically in avian crop or cecal contents in vitro, resulting in reductions of 1.10–2.32 log₁₀ colony forming units mL^?1 in C. jejuni concentrations after 24 h incubation. In a follow-up live animal study, oral administration of thymol-β-d-glucopyranoside, but not free thymol, significantly lowered (>10-fold) recovery of Campylobacter from the crop of market-aged broilers when compared to placebo-treated controls (n = 6 broilers/treatment). Neither thymol-β-d-glucopyranoside nor thymol affected recovery of Campylobacter from cecal contents of the treated broilers. These results indicate that rapid absorption or passage of free thymol from the crop precluded its anti-Campylobacter activity at this site and throughout the entire gastrointestinal tract. Conversely, lower recovery of Campylobacter from the crop of birds treated with thymol-β-d-glucopyranoside indicates this conjugate was retained and able to be hydrolyzed to biologically active free thymol at this site as intended, yet was not sufficiently protected to allow passage of efficacious amounts of the intact glycoside to the lower gut. Nevertheless, these results warrant further research to see if higher doses or encapsulation of thymol-β-d-glucopyranoside or similar glycosides may yield an efficacious additive to reduce carriage of Campylobacter as well as other pathogens throughout the avian gut.     

The Analysis of Airborne Sulfate

This report reviews the current state of analytical methodology for sulfate in airborne particles. Methods for determination of total aerosol sulfate and total soluble sulfate are assessed. A more detailed review of the relatively new techniques for quantitative speciation of airborne sulfate then follows. Size distribution methodology and filter sampling difficulties relating to the collection of airborne sulfate-containing particles are enumerated. Experiments are suggested which use new, improved, and potentially applicable sulfate speciation techniques to obtain a better understanding of the generation, transport, transformation and removal processes that, in turn, determine the identity and concentrations of sulfate species in ambient air.     

Characterization of Particulates from Power Plants

The emphasis on participate control from industrial processes has been shifted recently towards fine particulates, having diameters less than 3 microns. There exists an urgent need for more scientific information of fine particle characterization.^1,2 Coal and oil fired power plants are among the largest anthropogenic point sources of particulate matter.³ Limited knowledge is available on particle size distribution and trace metal composition in power plant emissions.^4-7 The morphological properties of particle emissions have been largely neglected. In this report we present some information on particle characteristics for an oil-fired and coal-fired power plant.     

Analysing the sensitivity behaviour of two hydrology models

Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and resolution) that control the sampling of the output parameter to determine its sensitivity to various inputs. The criteria for these parameters have been set on the analysis of a well-behaved analytical function (see Cropp and Braddock, Reliab. Eng. Syst. Saf. 78:77–83, 2002), which may not be applicable to other physical models that describe complex processes. This paper will investigate the appropriateness of the criteria from (Cropp and Braddock, 2002) and hence the effectiveness of the New Morris Method to determine the sensitivity behaviour of two hydrologic models: the Soil Erosion and Deposition System and Griffith University Representation of Urban Hydrology. In the first case, this paper will separately analyse the sensitivity of an output parameter on a set of input parameters (first- and second-order effects) for each model and discuss the physical meaning of these sensitivities. This will be followed by an investigation into the sampling criteria by exploring the convergence of the sensitivity behaviour for each model as the sampling of the parameter space is increased. By comparing these trends to the convergence behaviour from Cropp and Braddock (2002), we will determine how well the New Morris Method estimates the sensitivity for each model and whether the sampling criteria are appropriate for these models. It will be shown that the New Morris Method can provide additional insight into the functioning of these models, and that, under a different metric, the sensitivity behaviour of these models does converge confirming the sampling criteria set by Cropp and Braddock.     

Functional responses of copepod nauplii using a high efficiency gut fluorescence technique

To investigate copepod nauplii ingestion rates on phytoplankton, we have adapted the traditional gut fluorescence technique as it can be used with lower gut pigment concentrations. With the improved technique, laboratory experiments were performed to estimate functional responses for nauplii of Calanus helgolandicus and Centropages typicus. Nauplii were raised from eggs to copepodites and the experiments were performed with stages NIV-NV. Gut evacuation rates and ingestion rates were measured on Isochrysis galbana at different concentrations. Specific ingestion rates ranged between 0.038–0.244 μg C μg⁻¹ nauplii C d⁻¹ for C. typicus and 0.041–1.412 μg C μg⁻¹ nauplii C d⁻¹ for C. helgolandicus. Both species showed a type III functional response, reaching a saturation concentration at around 600 μgC l⁻¹ for C. typicus and 800 μgC l⁻¹ for C. helgolandicus. An erratum to this article can be found at     

Patterns of houses and habitat loss from 1937 to 1999 in northern Wisconsin, USA.

Rural America is witnessing widespread housing development, which is to the detriment of the environment. It has been suggested to cluster houses so that their disturbance zones overlap and thus cause less habitat loss than is the case for dispersed development. Clustering houses makes intuitive sense, but few empirical studies have quantified the spatial pattern of houses in real landscapes, assessed changes in their patterns over time, and quantified the resulting habitat loss. We addressed three basic questions: (1) What are the spatial patterns of houses and how do they change over time; (2) How much habitat is lost due to houses, and how is this affected by spatial pattern of houses; and (3) What type of habitat is most affected by housing development. We mapped 27 419 houses from aerial photos for five time periods in 17 townships in northern Wisconsin and calculated the terrestrial land area remaining after buffering each house using 100- and 500-m disturbance zones. The number of houses increased by 353% between 1937 and 1999. Ripley's K test showed that houses were significantly clustered at all time periods and at all scales. Due to the clustering, the rate at which habitat was lost (176% and 55% for 100- and 500-m buffers, respectively) was substantially lower than housing growth rates, and most land area was undisturbed (95% and 61% for 100-m and 500-m buffers, respectively). Houses were strongly clustered within 100 m of lakes. Habitat loss was lowest in wetlands but reached up to 60% in deciduous forests. Our results are encouraging in that clustered development is common in northern Wisconsin, and habitat loss is thus limited. However, the concentration of development along lakeshores causes concern, because these may be critical habitats for many species. Conservation goals can only be met if policies promote clustered development and simultaneously steer development away from sensitive ecosystems.     

A model for energetics and bioaccumulation in marine mammals with applications to the right whale.

We present a dynamic energy budget (DEB) model for marine mammals, coupled with a pharmacokinetic model of a lipophilic persistent toxicant. Inputs to the model are energy availability and lipid-normalized toxicant concentration in the environment. The model predicts individual growth, reproduction, bioaccumulation, and transfer of energy and toxicant from mothers to their young. We estimated all model parameters for the right whale; with these parameters, reduction in energy availability increases the age at first parturition, increases intervals between reproductive events, reduces the organisms' ability to buffer seasonal fluctuations, and increases its susceptibility to temporal shifts in the seasonal peak of energy availability. Reduction in energy intake increases bioaccumulation and the amount of toxicant transferred from mother to each offspring. With high energy availability, the toxicant load of offspring decreases with birth order. Contrary to expectations, this ordering may be reversed with lower energy availability. Although demonstrated with parameters for the right whale, these relationships between energy intake and energetics and pharmacokinetics of organisms are likely to be much more general. Results specific to right whales include energy assimilation estimates for the North Atlantic and southern right whale, influences of history of energy availability on reproduction, and a relationship between ages at first parturition and calving intervals. Our model provides a platform for further analyses of both individual and population responses of marine mammals to pollution, and to changes in energy availability, including those likely to arise through climate change.     

Adversarial safety analysis: borrowing the methods of security vulnerability assessments

INTRODUCTION: Safety and security share numerous attributes. The author, who heads the (Security) Vulnerability Assessment Team at Los Alamos National Laboratory, therefore argues that techniques used to optimize security might be useful for optimizing safety. OPTIMIZING SECURITY: There are three main ways to attempt to improve security-security surveys, risk assessment (or "design basis threat"), and vulnerability assessments. The latter is usually the most effective. SAFETY ANALOGS: Vulnerability assessment techniques used to improve security can be applied to safety analysis--even though safety is not ordinarily viewed as having malicious adversaries (other than hazards involving deliberate sabotage). Thinking like a malicious adversary can nevertheless have benefits in identifying safety vulnerabilities. SUGGESTIONS: The attributes of an effective safety vulnerability assessment are discussed, and recommendations are offered for how such an adversarial assessment might work. CONCLUSION: A safety vulnerability assessment can potentially provide new insights, a fresh and vivid perspective on safety hazards, and increased safety awareness.