Control Technologies for Remediation of Contaminated Soil and Waste Deposits at Superf und Lead Battery Recycling Sites

This paper primarily addresses remediation of contaminated soils and waste deposits at defunct lead-acid battery recycling sites (LBRS) via immobilization and separation processes. A defunct LBRS is a facility at which battery breaking, secondary lead smelting, or both operations were performed for the primary purpose of reclaiming lead from spent lead-acid batteries. Metallic lead and lead compounds are generally the principal contaminants of concern in soils and waste deposits (i.e., buried, piled, landfilled waste) at these sites. Other metals (e.g., cadmium, copper, arsenic, antimony, and selenium) are often present at LBRS, but usually at much lower concentrations than lead and often present below hazardous concentrations. This article is primarily based on experience gained from: (1) Superfund site investigation, removal, and remedial actions, and (2) development and demonstration of control technologies under the Superfund Innovative Technology Evaluation (SITE) Program. The primary remedial options for lead contaminated soils and waste deposits include: (1) no action, (2) off-site disposal, (3) containment, (4) immobilization, (5) separation with resource recovery, and (6) separation without resource recovery. In spite of the toxicity of lead at low concentrations, the relative immobility of lead and site-specific risk assessments can still result in the selection of no action or containment remedies. Solidification/stabilization of lead-contaminated soils has been implemented at three Superfund sites and is the selected remedy at several others. Separation technologies (e.g., screening, extraction) are attractive because, if successful, they actually remove the contaminant from the environmental media. Separation technologies also offer the possibility that a valuable product (e.g., lead, plastic, energy) can be recovered, but careful consideration of economic and technical factors are required. Compared to the implementation of containment and solidification I stabilization remedies, separation technologies tend to be relatively novel, complex, and costly.     

Chemical Composition of Fine Particles in the Tennessee Valley Region

ABSTRACT

Fine particles in the atmosphere have elicited new national ambient air quality standards (NAAQS) because of their potential role in health effects and visibility-reducing haze. Since April 1997, Tennessee Valley Authority (TVA) has measured fine particles (PM_2.5) in the Tennessee Valley region using prototype Federal Reference Method (FRM) samplers, and results indicate that the new NAAQS annual standard will be difficult to meet in this region. The composition of many of these fine particle samples has been determined using analytical methods for elements, soluble ions, and organic and elemental carbon. The results indicate that about one-third of the measured mass is SO₄ ^-2, one-third is organic aerosol, and the remainder is other materials. The fraction of SO₄ ^-2 is highest at rural sites and during summer conditions, with greater proportions of organic aerosol in urban areas throughout the year. Additional measurements of fine particle mass and composition have been made to obtain the short-term variability of fine mass as it pertains to human exposure. Measurements to account for semi-volatile constituents of fine mass (nitrates, semi-volatile organics) indicate that the FRM may significantly under-measure organic constituents. The potentially controllable anthropogenic fraction of organic aerosols is still largely unknown.     

A new approach to characterize emission contributions from area sources during optical remote sensing technique testing

In the method termed “Other Test Method-10,” the U.S. Environmental Protection Agency has proposed a method to quantify emissions from nonpoint sources by the use of vertical radial plume mapping (VRPM) technique. The surface area of the emitting source and the degree to which the different zones of the emitting source are contributing to the VRPM computed emissions are often unknown. The objective of this study was to investigate and present an approach to quantify the unknown emitting surface area that is contributing to VRPM measured emissions. Currently a preexisting model known as the “multiple linear regression model,” which is described in Thoma et al. (2009 Thoma, E.R., Green, R., Hater, G., Goldsmith, C., Swan, N., Chase, M. and Hashmonay, R. 2010. Development of EPA OTM-10 for landfill applications. J. Environ. Eng., 136: 769–776. [Crossref], [Web of Science ®] , [Google Scholar]), is used for quantifying the unknown surface area.

The method investigated and presented in this paper utilized tracer tests to collect data and develop a model much like that described in Thoma et al. (2009 Thoma, E.R., Green, R., Hater, G., Goldsmith, C., Swan, N., Chase, M. and Hashmonay, R. 2010. Development of EPA OTM-10 for landfill applications. J. Environ. Eng., 136: 769–776. [Crossref], [Web of Science ®] , [Google Scholar]). However, unlike the study used for development of the multiple linear regression model, this study is considered a very limited study due to the low number of pollutant releases performed (seven total releases). It was found through this limited study that the location of an emitting source impacts VRPM computed emissions exponentially, rather than linearly (i.e., the impact that an emitting source has on VRPM measurements decreases exponentially with increasing distances between the emitting source and the VRPM plane). The data from the field tracer tests were used to suggest a multiple exponential regression model. The findings of this study, however, are based on a very small number of tracer tests. More tracer tests performed during all types of climatic conditions, terrain conditions, and different emissions geometries are still needed to better understand the variation of capture efficiency with emitting source location. This study provides a step toward such an objective.

Implications The findings of this study will aid in the advancement of the VRPM technique. In particular, the contribution of this study is to propose a slight improvement in how the area contributing to flux is determined during VRPM campaigns. This will reduce some of the technique's inherent uncertainties when it is employed to estimate emissions from an area source under nonideal conditions.     

Vulnerability to climate variability and change in East Timor

This paper presents the results of a preliminary study of climate vulnerability in East Timor. It shows the results of projections of climate change in East Timor. The country's climate may become hotter, drier, and increasingly variable. Sea levels are likely to rise. The paper then considers the implications of these changes on three natural resources--water, soils, and the coastal zone--and finds all to be sensitive to changes in climate and sea level. Changes in the abundance and distribution of these resources is likely to cause a reduction in agricultural production and food security, and sea-level rise is likely to damage coastal areas, including Dili, the capital city.     

Total and partial digestion of sediments for the evaluation of trace element environmental pollution

Four different sample treatment methods for the determination of trace elements have been compared: a total digestion with HNO3-H2O2-HF using microwave, and three different standardized methods of fractionation: BCR three-steps sequential extraction, USEPA standard 3050B and ISO standard 11466. The four treatment methods were applied to the determination of Cu and Ni in four samples collected in different areas of Cienfuegos Bay (Cuba). The location of samples and the analytes were selected on the basis of results obtained by previous studies. Analyses following total digestion and BCR three-steps procedure were performed by inductively coupled plasma mass spectroscopy whereas analyses following EPA and ISO procedures were performed by flame atomic absorption spectroscopy. The results obtained have been compared with an estimated anthropic fraction evaluated in each sampling point as the difference between the total concentration and an estimated background concentration level. The BCR three-steps provided the best approximation of the estimated anthropic fraction and was therefore applied also in the determination of Pb and Cd for further consideration.     

Disrupted bone metabolism in contaminant-exposed white storks (Ciconia ciconia) in southwestern Spain

In 1998, the Aznalcóllar mine tailings dyke in southwestern Spain broke, flooding the Agrio-Guadiamar river system with acid tailings up to the borders of one of the largest breeding colonies of white storks in the western Palearctic, Dehesa de Abajo. Over the following years, a high proportion of nestlings developed leg defects not seen before the spill, prompting this study. Nestlings with deformed legs had significantly lower plasma phosphorous (P) and higher Ca:P ratios than non-deformed cohorts in the first two years, but in the third year, when more, younger birds were studied, plasma P ranged from much higher to much lower in the affected colony compared with reference birds. Coefficients of variation for phosphorous were 19% and 60%, in reference and contaminated colonies, respectively. Storks from the contaminated colony were unable to control P levels and Ca:P ratios within the narrow limits necessary for normal bone development.     

Modelling concentrations of decamethylcyclopentasiloxane in two UK rivers using LF2000-WQX

Current regulatory environmental exposure assessments for decamethylcyclopentasiloxane (D₅), used in a range of personal care products, are based on a number of erroneous assumptions. Using an estimated D₅ flux to waste water of 11.6 mg cap⁻¹ d⁻¹, a 95.2% removal rate in Sewage Treatment Plants (STP) and a dilution factor of 10 results in modelled surface water concentrations that are up to an order of magnitude higher than concentrations observed downstream of STPs in two UK rivers. A GIS-based water quality model (LF2000-WQX) was used to predict concentrations of D₅ in two UK rivers. Assuming the STP removal rate is reasonable, a waste water flux of 2.4 mg cap⁻¹ d⁻¹ is needed in order to obtain a reasonable match between predicted and observed in-river concentrations. This flux is consistent with measured effluent concentrations. The results highlight major uncertainties in estimating chemical emission rates for volatile chemicals used in personal care products and suggest that measured concentrations in waste water are needed to refine exposure assessments.     

Scenario-based stakeholder engagement: incorporating stakeholders preferences into coastal planning for climate change

Climate change poses many challenges for ecosystem and resource management. In particular, coastal planners are struggling to find ways to prepare for the potential impacts of future climate change while dealing with immediate pressures. Decisions on how to respond to future risks are complicated by the long time horizons and the uncertainty associated with the distribution of impacts. Existing coastal zone management approaches in the UK either do not adequately incorporate changing stakeholder preferences, or effectively ensure that stakeholders are aware of the trade-offs inherent in any coastal management decision. Using a novel method, scenario-based stakeholder engagement, which brings together stakeholder analysis, climate change management scenarios and deliberative techniques, the necessary trade-offs associated with long term coastal planning are explored. The method is applied to two case studies of coastal planning in Christchurch Bay on the south coast of England and the Orkney Islands off the north coast of Scotland. A range of conflicting preferences exist on the ideal governance structure to manage the coast under different climate change scenarios. In addition, the results show that public understanding of the trade-offs that have to be made is critical in gaining some degree of public support for long term coastal decision-making. We conclude that scenario-based stakeholder engagement is a useful tool to facilitate coastal management planning that takes into account the complexities and challenges of climate change, and could be used in conjunction with existing approaches such as the Shoreline Management Planning process.     

Trade-offs in linking adaptation and mitigation in the forests of the Congo Basin

Regional Environmental Change - Recent discussions on forests and climate change have highlighted the potential for conservation of tropical forests to contribute synergistically to both mitigation...