Evaluation and standardisation of a simple HG-AAS method for rapid speciation of As(III) and As(V) in some contaminated groundwater samples of West Bengal, India

A simple HG-AAS technique has been evaluated and standardised for rapid speciation of As(III) and As(V) in a number of contaminated groundwater samples of West Bengal, India. Citric acid has been used for selective hydride formation of As(III). The sensitivity of the evaluated HG-AAS method is 7.91 mg(-1)l, standard deviation, 0.001 and detection limit, 0.4 microg l(-1). As(III) sensitivity remains constant in the sample pH range of 2.3-10.6. Concomitant mineral matrix of the water samples did not interfere with arsenic determination. Eight out of ten groundwater samples analysed for As(IlI)and As(V) contain more As(III), which lies in the range of 54-350 ppb. As(III) estimation in drinking water along with total arsenic should be invoked as a policy for a realistic risk assessment of the contaminated water.     

Effect of concentration,moisture and soil type on the dissipation of flufenacet from soil

Effect of concentration, moisture and soil type on dissipation of flufenacet from soil has been studied under laboratory condition. The treated soil samples (1 and 10 microg/g levels) were incubated at 25+/-1 degrees C. The effect of moisture was studied by maintaining the treated soil samples (10 microg/g level) at field capacity and submerged condition. In general, flufenacet persisted for 60-90 days at lower and beyond 90 days at high rate. The dissipation of flufenacet from soil followed first order kinetics with half-life (DT50) values ranging from 10 to 31 days. The dissipation of flufenacet was faster at low rate than high rate of application. The slow dissipation at high rate could be attributed to inhibition of microbial activity at high rate. There was little overall difference in rate of dissipation in Ranchi and Nagpur soil maintained at field capacity and submerged condition moisture regimes. In Delhi soil net dissipation was faster under field capacity moisture than submerged condition. Soil types greatly influenced the dissipation of flufenacet. Dissipation was fastest in Delhi soil (DT50 10.1-22.3 days) followed by Ranchi soil (DT50 10.5-24.1 days) and least in Nagpur soil (DT50 29.2-31.0 days). The difference in dissipation could be attributed to the magnitude of adsorption and desorption of flufenacet in these soils.     

Case studies on biological treatment of tannery effluents in India

This paper presents a comparative assessment of the cost and quality of treatment of tannery wastewater in India by two common effluent treatment plants (CETPs) constructed for two tannery clusters, at Jajmau (Kanpur) and at Unnao in the state of Uttar Pradesh, India. The Jajmau plant is upflow anaerobic sludge blanket (UASB) process-based, while the Unnao plant is activated sludge process (ASP)-based. Investigations indicated that the ASP-based plant was superior in all respects. Total annualized costs, including capital and operation and maintenance costs, for the UASB and ASP plants were Rs. 4.24 million/million liters per day (MLD) and Rs. 3.36 million/MLD, respectively. Land requirements for the two CETPs were 1.4 hectares/MLD and 0.95 hectares/ MLD, respectively. Moreover, the treated UASB effluent had higher biochemical and chemical oxygen demand (BOD/ COD) and considerable amounts of other undesirable constituents, like chromium (Cr) and sulfide, as compared with the ASP effluent, which had lower BOD/COD and negligible concentration of sulfide and Cr. Sludge production from the UASB-based plant was also higher at 1.4 t/day/MLD, in comparison to the sludge production of 0.8 t/day/MLD for the ASP-based plant. Also, the entire sludge produced in the UASB-based plant was Cr-contaminated and, hence, hazardous, while only a small fraction of the sludge produced in the ASP-based plant was similarly contaminated. The results of this study are at variance with the conventional wisdom of the superiority of anaerobic processes for tannery wastewater treatment in tropical developing countries like India.     

Fly-ash induced synthesis of phytochelatins in chickpea (Cicer arietinum L.) plants

Phytochelatins and related metabolites (cysteine and GSH) were found to be induced in the shoots of two varieties of Cicer arietinum viz., CSG-8962 and C-235 grown under different amendments of fly-ash with garden soil and press mud. Cysteine, GSH, PCs and its speciation were found in higher concentrations in amended fly-ash than in the control 100% soil. Two species of metal binding peptides i.e., PC2 and PC4 were found in both varieties and in amendments, however, their concentration varied depending upon the fly-ash concentrations in both amendments. Further, var. CSG-8962 was found more tolerant than var. C-235 because of higher concentrations of PCs and related metabolites.     

Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.     

Gender response and safe carrying load limit for sugar industry workers

This study investigates the safe carrying load limit in relation to gender of workers in the sugar industry. A total of 632 workers (male and female) were interviewed following a physiological and psycho-physiological methodology. All of these workers were in the age groups of 21–30, 31–40 and ≥41 years. In this study, for the physiological methodology, both field and laboratory data were collected, which included heart rate, heart rate variability, energy expenditure and maximum rate of oxygen consumption. Information regarding hemoglobin content, weight, age, lean body weight, etc., was recorded to know the physical health of the workers. In the psycho-physiological evaluation, load-carrying limits were determined by the psychophysical rating of the load by workers from the selected age groups. By considering the physiological stresses and psycho-physiological evaluation, the safe carrying load limit was determined in head and back mode for male and female workers as per their age groups.     

A multilevel perspective of interpersonal trust: Individual,dyadic, and cross‐level predictors of performance

While it is generally known that interpersonal trust facilitates individual functioning, few studies have examined the role of specific features of the interpersonal trust network — individual, dyadic, third‐party, and network‐level features — on individual performance. We adopt a multilevel perspective of interpersonal trust to examine how individuals' performance is not only predicted by their individual‐level centrality in the interpersonal trust network but also moderated, at the network level, by the overall centralized nature of that network. Further, we examine whether mutual trust relationships at the dyadic level, as well as shared trust ties to common third parties, can predict individuals' performance. We test our hypotheses with 206 members in 15 professional networking groups and find that interpersonal trust operates at multiple levels to predict members' performance in terms of generating income from business referrals. These findings provide theoretical and practical implications on how interpersonal trust relationships operate and can be managed for performance gains. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of hexachlorocyclohexane administration on distribution of trace metals in rat tissues

The effects of daily administration of hexachlorocyclohexane (HCH) for 90 days on the distribution of Cu, Zn, Fe and Mn in rat tissues were investigated. The results indicated that HCH caused a significant increase in weight of liver and spleen and decrease in the weight of kidney, heart and brain. The spleen and heart demonstrated the maximum mobilization of metals. Comparing the individual trace elements, zinc appeared to be the most active element. None of the metals assayed registered change in RBC's but there was increase in Zn, Fe and Mn concentration in plasma.