Usability of food industry waste oils as fuel for diesel engines

Two cogeneration units were each fitted with a prechamber (IDI) diesel engine in order to test the feasibility of using waste oils from the food industry as a fuel source, and additionally to test emissions generated by the combustion of these fuels. Esterified waste oils and animal fats as well as mustard oil were tested and compared to the more or less "common" fuels: diesel, rapeseed oil and rapeseed methyl ester. The results show that, in principle, each of these fuels is suitable for use in a prechamber diesel engine. Engine performance can be maintained at a constant level. Without catalytic conversion, the nitrogen oxides emissions were comparable. A significant reduction in NO(x) was achieved through the injection of urea. Combining a urea injection with the SCR catalytic converter reduced NO(x) emissions between 53% and 67%. The carbon monoxide emissions from waste oils are not significantly different from those of "common" fuels and can be reduced the same way as of hydrocarbon emissions, through utilization of a catalytic converter. The rate of carbon monoxide reduction by catalytic conversion was 84-86%. A lower hydrocarbon concentration was associated with fuels of agricultural origin. With the catalytic converter a reduction of 29-42% achieved. Each prechamber diesel engine exhibited its own characteristic exhaust, which was independent of fuel type. The selective catalytic reduction of the exhaust emissions can be realized without restriction using fuels of agricultural origin.     

Matrix effects on the de novo synthesis of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls and benzenes

The formation of polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls and benzenes in de novo synthesis experiments have been studied on model fly ashes with a wide range of matrices. The model fly ash consisted of 18 selected matrices with the addition of CuCl(2) x 2H(2)O, activated charcoal and NaCl. The studied matrices were not restricted to the commonly investigated matrices with defined chemical composition (silica gel, alumina, florisil) and industrially produced adsorbents with silicate structures (diatomaceous earths), but also included natural occurring matrices (clays, kaolin, bentonite and feldspars). In addition fly ashes from a hazardous waste incinerator were included in the study for comparison. Differences in the isomer composition (homologue profiles and isomer patterns) of the substances formed by de novo synthesis experiments are discussed in dependence on the chemical composition of the studied matrices. The de novo synthesis experiments on matrices with silicate structures resulted in high concentration of mainly perchlorinated aromatic compounds while for other matrices in particular alkaline matrices a homologue shift to lower chlorinated homologues and lower formation rates were found. The paper discusses the resulting PCDD/PCDF pattern and compares them to the PCDD/PCDF profile found in naturally occurring kaolin and ball clay (illite).     

Comparison of the solution behaviour of a pyrite-calcite mixture in batch and unsaturated sand column

A successful application of reaction transport algorithms to calculate the chemical evolution of natural systems requires accurate methods to compute the rates of mineral/fluid surface reactions. Regarding the transport of radio-nuclides in mining dumps the dissolution of minerals is of special importance. Using a kinetic rate law of the mineral dissolution verified for unsaturated conditions will allow a realistic modelling of the mineral weathering in the environment. Dissolution rates of minerals in an aqueous solution are determined by several characteristics. These are surface reaction rates, morphology of the mineral's surface and, in case it is the unsaturated zone, the degree of the water saturation. For this process, the quantity of the particle surfaces which are in contact with percolating water is most decisive. In order to study the differences of mineral dissolution under saturated and unsaturated conditions batch and column experiments were carried out with a pyrite-calcite mixture. The experimental results were verified by calculations. Comparing the dissolution in batch with those in the column experiment, which was performed with a water flow velocity of 0.64 cm/day and was analyzed in the region of a water saturation of 0.11, one can conclude that only a small portion of about 5% of the grain surface is chemically reactive in this unsaturated flow.     

Correction to: Small-scale on-site treatment of fecal matter: comparison of treatments for resource recovery and sanitization

Environmental Science and Pollution Research - A correction to this paper has been published: https://doi.org/10.1007/s11356-021-13658-3     

Life cycle assessment of energy from waste via anaerobic digestion: A UK case study

Particularly in the UK, there is potential for use of large-scale anaerobic digestion (AD) plants to treat food waste, possibly along with other organic wastes, to produce biogas. This paper presents the results of a life cycle assessment to compare the environmental impacts of AD with energy and organic fertiliser production against two alternative approaches: incineration with energy production by CHP and landfill with electricity production. In particular the paper investigates the dependency of the results on some specific assumptions and key process parameters. The input Life Cycle Inventory data are specific to the Greater London area, UK. Anaerobic digestion emerges as the best treatment option in terms of total CO₂ and total SO₂ saved, when energy and organic fertiliser substitute non-renewable electricity, heat and inorganic fertiliser. For photochemical ozone and nutrient enrichment potentials, AD is the second option while incineration is shown to be the most environmentally friendly solution. The robustness of the model is investigated with a sensitivity analysis. The most critical assumption concerns the quantity and quality of the energy substituted by the biogas production. Two key issues affect the development and deployment of future anaerobic digestion plants: maximising the electricity produced by the CHP unit fuelled by biogas and to defining the future energy scenario in which the plant will be embedded.     

Buoyancy and turbulence-driven atmospheric circulation over urban areas

In the buoyancy and turbulence-driven atmospheric circulations (BTDAC) that occur over urban areas where the approach means wind speeds are very low (less than turbulent fluctuations and typically < 3 m/sec), the surface temperatures are significantly higher than those in the external rural areas, and the atmosphere above the mixing layer is stably stratified. In this paper, the mechanisms of BTDAC formation are studied through laboratory experiments and modelling, with additional low-level inflow from external rural areas and a divergent outflow in the opposite direction in the upper part of the mixed layer. Strong turbulent plumes in the central region mix the flow between lower and higher levels up to the inversion height. There are shear-driven turbulent eddies and weaker buoyant plumes around the periphery of the urban area. As the approach flow is very weak, the recirculating streamlines within the dome restrict the ventilation, and the dispersion of pollution emitted from sources below the inversion height leading to a rise in the mean concentration. Low-level air entrained from rural areas can, however, improve ventilation and lower this concentration. This trend can also be improved if the recirculating structure of the BTDAC flow pattern over urban areas breaks down as a result of the surface temperature distribution not being symmetrical, or as the approach wind speed increases to a level comparable with the mean velocity of circulation, or (except near the equator) the urban area is large enough that the Coriolis acceleration is significant.     

Phenotypic analysis of fetal blood leucocytes: Potential for prenatal diagnosis of immunodeficiency disorders

Recent technological advances allow the detection and quantitation of subsets of leucocytes using monoclonal antibodies. We have taken advantage of this to study the ontogeny of fetal blood leucocytes, using very small blood samples obtained at fetoscopy. By 14 weeks gestation T cells represent 35 per cent or more of fetal leucocytes and the distribution of the helper/inducer and suppressor/cytotoxic subsets is similar to that of adults. B lymphocytes before 161/2 weeks are low (4–20 per cent), but rise to a mean of 28 per cent in 17–26 week fetuses. Granulocytic cells, many of which are phenotypically immature, represent 18–34 per cent of total leucocytes. The methodology employed is very reliable and offers the opportunity for the prenatal diagnosis of some immunodeficiency disorders, since using the same reagents we have diagnosed children with severe combined immunodeficiency shortly after birth.