Longitudinal variability in streamwater chemistry and carbon and nitrogen fluxes in restored and degraded urban stream networks

Stream restoration has increasingly been used as a best management practice for improving water quality in urbanizing watersheds, yet few data exist to assess restoration effectiveness. This study examined the longitudinal patterns in carbon and nitrogen concentrations and mass balance in two restored (Minebank Run and Spring Branch) and two unrestored (Powder Mill Run and Dead Run) stream networks in Baltimore, Maryland, USA. Longitudinal synoptic sampling showed that there was considerable reach-scale variability in biogeochemistry (e.g., total dissolved nitrogen (TDN), dissolved organic carbon (DOC), cations, pH, oxidation/reduction potential, dissolved oxygen, and temperature). TDN concentrations were typically higher than DOC in restored streams, but the opposite pattern was observed in unrestored streams. Mass balances in restored stream networks showed net uptake of TDN across subreaches (mean ± standard error net uptake rate of TDN across sampling dates for Minebank Run and Spring Branch was 420.3 ± 312.2 and 821.8 ± 570.3 mg m(-2) d(-1), respectively). There was net release of DOC in the restored streams (1344 ± 1063 and 1017 ± 944.5 mg m(-2) d(-1) for Minebank Run and Spring Branch, respectively). Conversely, degraded streams, Powder Mill Run and Dead Run showed mean net release of TDN across sampling dates (629.2 ± 167.5 and 327.1 ± 134.5 mg m(-2) d(-1), respectively) and net uptake of DOC (1642 ± 505.0 and 233.7 ± 125.1 mg m(-2) d(-1), respectively). There can be substantial C and N transformations in stream networks with hydrologically connected floodplain and pond features. Assessment of restoration effectiveness depends strongly on where monitoring is conducted along the stream network. Monitoring beyond the stream-reach scale is recommended for a complete perspective of evaluation of biogeochemical function in restored and degraded urban streams.     

Heavy metal pollution in water and sediments in the Kabini River, Karnataka, India

Critical to habitat management is the understanding of not only the location of animal food resources, but also the timing of their availability. Grizzly bear (Ursus arctos) diets, for example, shift seasonally as different vegetation species enter key phenological phases. In this paper, we describe the use of a network of seven ground-based digital camera systems to monitor understorey and overstorey vegetation within species-specific regions of interest. Established across an elevation gradient in western Alberta, Canada, the cameras collected true-colour (RGB) images daily from 13 April 2009 to 27 October 2009. Fourth-order polynomials were fit to an RGB-derived index, which was then compared to field-based observations of phenological phases. Using linear regression to statistically relate the camera and field data, results indicated that 61% (r (2)?= 0.61, df = 1, F?= 14.3, p?= 0.0043) of the variance observed in the field phenological phase data is captured by the cameras for the start of the growing season and 72% (r (2)?= 0.72, df = 1, F?= 23.09, p?= 0.0009) of the variance in length of growing season. Based on the linear regression models, the mean absolute differences in residuals between predicted and observed start of growing season and length of growing season were 4 and 6?days, respectively. This work extends upon previous research by demonstrating that specific understorey and overstorey species can be targeted for phenological monitoring in a forested environment, using readily available digital camera technology and RGB-based vegetation indices.     

Distribution of vehicular pollutants in street canyons of Varanasi, India: a different case

In present study horizontal and vertical distribution of traffic-related pollutants (CO and SO(2)) within the street canyons in (CO and SO(2)) Varanasi, India was monitored. The results showed that average horizontal profiles of traffic-related pollutant concentrations within street canyon at leeward side were approximately same as that of windward side. However, the vertical concentration of both the pollutants decreases with height above the ground and study indicated that CO and SO(2) concentrations at different heights below the roof showed clear vertical self-gradient. CO and SO(2) concentration decreased with height and the minimum value occurred at the roof. It was concluded from the observed results that pollutants from vehicular exhaust emissions in the street canyon of Varanasi were evenly distributed. This result may be due to the fact that wind vortices are not formed. Therefore, urban planners can use this type of streets so that there is proper ventilation and dispersal of pollutants.     

Utility of dynamics as indicators of stress in population models

The relationships between the dynamics of environmentally and chemically stressed populations and indicators of the effects of the stressor are explored in a model framework. The physiologically structured population, represented by a system of McKendrick–von Foerster hyperbolic partial differential equations, includes the dynamics of numerous individuals distinguished by ecotype. Chemical uptake of nonpolar narcotics is modeled by first order kinetics. Classical methodologies, frequency analysis and phase space reconstruction, are explored in a search for indicators of magnitude of stress. When these techniques proved generally unsuccessful for the objective of indicator selection in our model setting, summary statistics, as related to bifurcation diagrams, were constructed and appear more useful as indicators. It is concluded that physiological structures generally lead to more feasible measurable indicators of magnitude of stress than do specifics of population dynamics.     

Selecting optimal hyperspectral bands to discriminate nitrogen status in durum wheat: a comparison of statistical approaches

Hyperspectral data can provide prediction of physical and chemical vegetation properties, but data handling, analysis, and interpretation still limit their use. In this study, different methods for selecting variables were compared for the analysis of on-the-ground hyperspectral signatures of wheat grown under a wide range of nitrogen supplies. Spectral signatures were recorded at the end of stem elongation, booting, and heading stages in 100 georeferenced locations, using a 512-channel portable spectroradiometer operating in the 325–1075-nm range. The following procedures were compared: (i) a heuristic combined approach including lambda-lambda R² (LL R²) model, principal component analysis (PCA), and stepwise discriminant analysis (SDA); (ii) variable importance for projection (VIP) statistics derived from partial least square (PLS) regression (PLS-VIP); and (iii) multiple linear regression (MLR) analysis through maximum R-square improvement (MAXR) and stepwise algorithms. The discriminating capability of selected wavelengths was evaluated by canonical discriminant analysis. Leaf-nitrogen concentration was quantified on samples collected at the same locations and dates and used as response variable in regressive methods. The different methods resulted in differences in the number and position of the selected wavebands. Bands extracted through regressive methods were mostly related to response variable, as shown by the importance of the visible region for PLS and stepwise. Band selection techniques can be extremely useful not only to improve the power of predictive models but also for data interpretation or sensor design.     

Forensic fingerprinting and source identification of the 2009 Sarnia (Ontario) oil spill

This paper presents a case study in which integrated forensic oil fingerprinting and data interpretation techniques were used to characterize the chemical compositions and determine the source of the 2009 Sarnia (Ontario) oil spill incident. The diagnostic fingerprinting techniques include determination of hydrocarbon groups and semi-quantitative product-type screening via gas chromatography (GC), analysis of oil-characteristic biomarkers and the extended suite of parent and alkylated PAH (polycyclic aromatic hydrocarbon) homologous series via gas chromatography-mass spectrometry (GC-MS), determination and comparison of a variety of diagnostic ratios of "source-specific marker" compounds, and determination of the weathering degree of the spilled oil, and whether the spilled oil hydrocarbons have been mixed with any other "background" chemicals (biogenic and/or pyrogenic hydrocarbons). The detailed chemical fingerprinting data and results reveal the following: (1) all four samples are mixtures of diesel and lubricating oil with varying percentages of diesel to lube oil. Both samples 1460 and 1462 are majority diesel-range oil mixed with a smaller portion of lube oil. Sample 1461 contains slightly less diesel-range oil. Sample 1463 is majority lubricating-range oil. (2) The diesel in the four diesel/lube oil mixture samples was most likely the same diesel and from the same source. (3) The spill sample 1460 and the suspected-source sample 1462 have nearly identical concentrations and distribution patterns of target analytes including TPHs, n-alkane, PAHs and biomarker compounds; and have nearly identical diagnostic ratios of target compounds as well. Furthermore, a perfect "positive match" correlation line (with all normalized ratio data points falling into the straight correlation line) is clearly demonstrated. It is concluded that the spill oil water sample 1460 (#1, from the water around the vessel enclosed by a boom) matches with the suspected source sample 1462 (#3, from the vessel engine room bilge pump). (4) From the n-alkane and PAH analysis, it appears that the oil in the spill sample 1460 is slightly more weathered in comparison with sample 1462. The minor differences in fingerprints of two samples were most likely caused by weathering effects. (5) Sample 1461 (#2, from the vessel engine room bilge) and sample 1463 (#4, from the vessel bilge waste collection tank) demonstrated significantly different fingerprints and diagnostic ratios of target compounds from that of spill sample 1460. This was caused most likely by percentages of diesel to lube oil in these two samples different from that in spill sample 1460.     

Performance evaluation of two commercial chemiluminescence NOx analysers according to European Standard EN 14211

According to Directive 2008/50/EC, all equipment used for NO(x) fixed measurements must comply with the reference method or equivalent by 11 June 2013. Up to that date, non-type-approved equipment can continue to be used in air monitoring networks and will probably also be used in air pollution studies even after that date. In this context, it is advisable to know how these "old" measuring instruments respond to the requirements of European Standard EN 14211: 2005: Ambient Air Quality--Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence. In this work, we carry out a thorough performance evaluation of two commercial NO(x) analysers, both purchased before 2010, according to the mentioned Standard. Results show that water vapour interference is one of the most important disconformities with this Standard. The expanded uncertainty estimation of both analysers was below the quality objective of the above-mentioned Directive (15%); however, this calculation was performed by applying some modifications to the proposed model of Standard EN 14211. These modifications are also discussed in the paper.