Effect of six kinds of scale inhibitors on calcium carbonate precipitation in high salinity wastewater at high temperatures

Precipitation of calcium carbonate(Ca CO3) scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect of six kinds of commercial scale inhibitors and screened out the best one(scale inhibitor SQ-1211) to investigate its scale inhibition performance in highly saline conditions at high temperature through static scale inhibition tests. The influences of scale inhibitor dosage, temperature, heating time and p H on the inhibition efficiency of the optimal scale inhibitor were investigated. The morphologies and crystal structures of the precipitates were characterized by Scanning Electron Microscopy and X-ray Diffraction analysis. Results showed that the scale inhibition efficiency of the optimal scale inhibitor decreased with the increase of the reaction temperature. When the concentration of Ca2+was 1600 mg/L, the scale inhibition rate could reach 90.7% at 80°C at p H 8. The optimal scale inhibitor could effectively retard scaling at high temperature. In the presence of the optimal scale inhibitor, the main crystal structure of Ca CO3 changed from calcite to aragonite.     

Adsorption and biodegradation of three selected endocrine disrupting chemicals in river-based artificial groundwater recharge with reclaimed municipal wastewater

Endocrine disrupting chemical(EDC) pollution in river-based artificial groundwater recharge using reclaimed municipal wastewater poses a potential threat to groundwater-based drinking water supplies in Beijing, China. Lab-scale leaching column experiments simulating recharge were conducted to study the adsorption, biodegradation, and transport characteristics of three selected EDCs: 17β-estradiol(E2), 17α-ethinylestradiol(EE2) and bisphenol A(BPA). The three recharge columns were operated under the conditions of continual sterilization recharge(CSR), continual recharge(CR), and wetting and drying alternative recharge(WDAR). The results showed that the attenuation effect of the EDCs was in the order of WDAR CR CSR system and E2 EE2 BPA, which followed first-order kinetics. The EDC attenuation rate constants were 0.0783, 0.0505, and 0.0479 m-1 for E2, EE2 and BPA in the CR system, respectively. The removal rates of E2, EE2, and BPA in the CR system were 98%, 96% and 92%, which mainly depended on biodegradation and were affected by water temperature.In the CR system, the concentrations of BPA, EE2, and E2 in soil were 4, 6 and 10 times higher than in the WDAR system, respectively. According to the DGGE fingerprints, the bacterial community in the bottom layer was more diverse than in the upper layer, which was related to the EDC concentrations in the water-soil system. The dominant group was found to be proteobacteria, including Betaproteobacteria and Alphaproteobacteria, suggesting that these microbes might play an important role in EDC degradation.     

Serious BTEX pollution in rural area of the North China Plain during winter season

Atmospheric BTEX compounds(benzene, toluene, ethylbenzene and xylenes) in a rural site of the North China Plain(NCP) were preliminarily investigated in winter, and the outdoor concentrations(25.8–236.0 μg/m3) were found to be much higher than those reported in urban regions. The pollution of BTEX inside a farmer's house was even more serious, with combined concentrations of 254.5–1552.9 μg/m3. Based on the ratio of benzene to toluene(1.17 ± 0.34) measured, the serious BTEX pollution in the rural site was mainly ascribed to domestic coal combustion for heating during the winter season. With the enhancement of farmers' incomes in recent years, coal consumption by farmers in the NCP is rapidly increasing to keep their houses warm, and hence the serious air pollution in rural areas of the NCP during winter, including BTEX, should be paid great attention.     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

Mercury levels and estimated total daily intakes for children and adults from an electronic waste recycling area in Taizhou, China: Key role of rice and fish consumption

In order to assess the potential health risks of Hg pollution, total mercury (T–Hg) and methyl mercury (MeHg) concentrations were determined in air, dust, surface soil, crops, poultry, fish and human hair samples from an electronic waste (e-waste) recycling area in Taizhou, China. High concentrations of T–Hg and MeHg were found in these multiple matrices, and the mean concentration was 30.7 ng/m³ of T–Hg for atmosphere samples, 3.1 μg/g of T–Hg for soil, 37.6 μg/g of T–Hg for dust, 20.3 ng/g of MeHg for rice and 178.1 ng/g of MeHg for fish, suggesting that the e-waste recycling facility was a significant source of Hg. The inorganic Hg (I–Hg) levels (0.84 μg/g) in hair samples of e-waste workers were much higher than that in the reference samples. Pearson''s correlation coefficients showed that strong positive correlations (p < 0.01) between hair I–Hg and time staying in industrial area (r = 0.81) and between MeHg and fish consumption frequency (r = 0.91), imply that workers were mainly exposed to Hg vapor through long-time inhalation of contaminated air and dust, while other population mainly exposed to MeHg through high-frequency fish consumption. The estimated daily intakes of Hg showed that dietary intake was the major Hg exposure source, and Hg intakes from rice and fish were significantly higher than from any other foods. The estimated total daily intakes (TDIs) of MeHg for both children (696.8 ng/(kg·day)) and adults (381.3 ng/(kg·day)) greatly exceeded the dietary reference dose (RfD) of 230 ng/(kg·day), implying greater health risk for humans from Hg exposures around e-waste recycling facilities.     

Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs(phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration(sum of the gas phase and the particulate phase) was4748.24 ng/m3, ranging between 3070.09 and 6700.14 ng/m3. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the ∑ 6PAEs. Dividing the particulate-phase PAEs into four size ranges( 2.5, 2.5–5, 5–10, 10 μm), the result indicated that PAEs in PM2.5were the most abundant,with the proportion of 72.64%. In addition, the PAE concentration in PM2.5correlated significantly with the total particulate-phase PAEs(R2= 0.85). Thus, the amount of PAEs in PM2.5can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Do vehicular emissions dominate the source of C6–C8 aromatics in the megacity Shanghai of eastern China?

The characteristic ratios of volatile organic compounds(VOCs) to i-pentane, the indicator of vehicular emissions, were employed to apportion the vehicular and non-vehicular contributions to reactive species in urban Shanghai. Two kinds of tunnel experiments, one tunnel with more than 90% light duty gasoline vehicles and the other with more than 60% light duty diesel vehicles, were carried out to study the characteristic ratios of vehicle-related emissions from December 2009 to January 2010. Based on the experiments, the characteristic ratios of C6–C8aromatics to i-pentane of vehicular emissions were 0.53 ± 0.08(benzene), 0.70 ± 0.12(toluene),0.41 ± 0.09(m,p-xylenes), 0.16 ± 0.04(o-xylene), 0.023 ± 0.011(styrene), and 0.15 ± 0.02(ethylbenzene), respectively. The source apportionment results showed that around 23.3% of C6–C8 aromatics in urban Shanghai were from vehicular emissions, which meant that the non-vehicular emissions had more importance. These findings suggested that emission control of non-vehicular sources, i.e. industrial emissions, should also receive attention in addition to the control of vehicle-related emissions in Shanghai. The chemical removal of VOCs during the transport from emissions to the receptor site had a large impact on the apportionment results. Generally, the overestimation of vehicular contributions would occur when the VOC reaction rate constant with OH radicals(k OH) was larger than that of the vehicular indicator, while for species with smaller k OH than the vehicular indicator, the vehicular contribution would be underestimated by the method of characteristic ratios.     

Enhanced CO2 adsorptive performance of PEI/SBA-15 adsorbent using phosphate ester based surfactants as additives

In this study,a series of polyetherimide/SBA-15: 2-D hexagonal P6 mm,Santa Barbara USA(PEI/SBA-15) adsorbents modified by phosphoric ester based surfactants(including tri(2-ethylhexyl)phosphate(TEP),bis(2-ethylhexyl) phosphate(BEP) and trimethyl phosphonoacetate(TMPA))were prepared for CO_2 adsorption.Experimental results indicated that the addition of TEP and BEP had positive effects on CO_2 adsorption capacity over PEI/SBA-15.In particular,the CO_2 adsorption amount could be improved by around 20% for 45PEI–5TEP/SBA-15 compared to the additive-free adsorbent.This could be attributed to the decrease of CO_2 diffusion resistance in the PEI bulk network due to the interactions between TEP and loaded PEI molecules,which was further confirmed by adsorption kinetics results.In addition,it was also found that the cyclic performance of the TEP-modified adsorbent was better than the surfactant-free one.This could be due to two main reasons,based on the results of in situ DRIFT and TG-DSC tests.First and more importantly,adsorbed CO_2 species could be desorbed more rapidly over TEP-modified adsorbent during the thermal desorption process.Furthermore,the enhanced thermal stability after TEP addition ensured lower degradation of amine groups during adsorption/desorption cycles.     

Excretion of manure-borne estrogens and androgens and their potential risk estimation in the Yangtze River Basin

The Yangtze River is the longest river in China, and the river basin spans one fifth of the area of the whole country. Based on statistical data, the excretion of manure-borne steroid hormones, including steroid estrogens(SEs) and steroid androgens(SAs), in 10 provinces of China within the region has been estimated. The potential environmental and ecological risk of manure-borne steroid estrogens to the surface water in this region was also assessed. The manure-borne SE and SA excretions in the 10 provinces and municipalities vary in the order: Sichuan Hunan Hubei Yunnan Jiangsu Anhui Jiangxi Chongqing Qinghai Shanghai. The highest increase of manure-borne SEs(1434.3 kg)and SAs(408.5 kg) was found in Hunan and Hubei provinces, respectively, and the total excretion in 2013 was 65% more than 15 years earlier in these two provinces. However, the emissions in Anhui and Shanghai decreased in this 15 year period of time. Swine urine,chicken feces, cattle urine, and laying hen feces were considered the dominant sources of manure-borne E1, βE2, αE2, and SAs, respectively. Although Jiangsu province did not have the largest excretion of manure-borne SEs, it had the highest level of predicted17β-estradiol equivalency(EEQs) value of 16.65 ng/L in surface water because of the limited surface water resources. According to the lowest observable effect level of 10 ng/L for17β-estradiol, the manure-borne SEs in Jiangsu province might potentially pose ecological risk to its wild aquatic organisms.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。