Vertical growth in a coastal city: an analysis of Boa Viagem (Recife,Brazil)

Coastal zones around the world have experienced urban growth in the last 50 years. This landscape change brings new aspects for those zones and the environment. Real estate speculation is a decisive factor that changes landscape, with urban growth that occurs both in the extent and volume of construction. Boa Viagem (BV) beach at Recife, Northeast Brazil was just a sand bar covered by an Atlantic Forest until middle of the 1800s. Today, it has turned into a busy area of the city where residences, services and commerce co-exist in a densely packed arrangement. This work demonstrates and analyses vertical growth in BV and urban changes from 1961 to 2011. It was developed using digital image processing and visual analysis of satellite imagery and aerial photos. A GIS was created using SPRING and ArcScene, to calculate variations in area and volume creating a Volumetric Index (VI). The Minimal Mapping Area was used in sixteen census tract as samples of the area. Occupation and vertical growth were especially accentuated from 1981 to 1996 with the peak at 2011. Increases in vertical growth from shore to inland are evident in all parts of the district. This finding was confirmed by three-dimensional GIS representations of the study area and the VI during the period of this work, showing the potential of 3D GIS models for studying dense urbanization areas in coastal zones.     

Vacuum promotes metabolic shifts and increases biogenic hydrogen production in dark fermentation systems

The successful operation of any type of hydrogen-producing bioreactor depends on the performance of the microorganisms present in the system. Both substrate and partial gas pressures are crucial factors affecting dark fermentation metabolic pathways. The main objective of this study was to evaluate the impact of both factors on hydrogen production using anaerobic granular sludge as inoculum and, secondly, to study the metabolic shifts of an anaerobic community subjected to low partial gas pressures. With this goal in mind, seven different wastewater (four synthetic media, two industrial wastewater, and one domestic effluent) and the effect of applying vacuum on the systems were analyzed. The application of vacuum promoted an increase in the diversity of hydrogenproducing bacteria, such as Clostridium, and promoted the dominance of acetoclastic- over hydrogenotrophic methanogens. The application of different media promoted a wide variety of metabolic pathways. Nevertheless, reduction of the hydrogen partial pressure by application of vacuum lead to further oxidation of reaction intermediates irrespective of the medium used, which resulted in higher hydrogen and methane production, and improved the COD removal. Interestingly, vacuum greatly promoted biogenic hydrogen production from a real wastewater, which opens possibilities for future application of dark fermentation systems to enhance biohydrogen yields.     

Mating effort and space use of an alpine ungulate during the rut

In ungulates, the rut generally leads to increased intra and interpopulation movements for males. Because movements induce energetic costs and missed feeding opportunities, they could be an indication of male mating effort. We studied space use of 44 male mountain goats (Oreamnos americanus) from three neighboring subpopulations in southeast Alaska, during the rut from 2005 to 2008. Using mixed models and an information theoretic approach with AIC, we analyzed the relationships between individual traits of males and their space use. We found no indication of breeding migration between subpopulations. Distances between individual seasonal ranges were not related to any individual trait. Daily movements, home range sizes, and total distance traveled during the rut did not vary with mass or age of individuals. As such, effects of individual traits on male space use during the rut appear weak and observed space use patterns do not support any of the main mating effort hypotheses.     

Sustainable development in the BRICS countries: an efficiency analysis by data envelopment

There is much concern about the social and environmental impacts caused by the economic growth of nations. Thus, to evaluate the socio-economic performance of nations, economists have increasingly addressed matters related to social welfare and the environment. It is within the scope of this context that this work discusses the performance of countries in the BRICS group regarding sustainable development. The objective of this study regards evaluating the efficiency of these countries in transforming productive resources and technological innovation into sustainable development. The proposed objective was achieved by using econometric tools as well as the data envelopment analysis method to then create economic, environmental, and social efficiency rankings for the BRICS countries, which enabled to carry out comparative analyses on the sustainable development of those countries. The results of such assessments can be of interest for more specific scientific explorations.     

Irreplaceable area extends marine conservation hotspot off Tunisia: insights from GPS-tracking Scopoli’s shearwaters from the largest seabird colony in the Mediterranean

Recent meta-analyses identified conservation hotpots at the scale of the Mediterranean, yet those may be crude by lack of detailed information about the spatial ecology of the species involved. Here, we identify an irreplaceable marine area for >95 % of the world population of the Scopoli’s shearwater (Calonectris diomedea), which is endemic to the Mediterranean and breeds on the island of Zembra off Tunis. To this end, we studied the three-dimensional at-sea movements of 50 breeding adults (over a total of 94 foraging trips) in 2012 and 2013, using GPS and temperature–depth recorders. Feathers were also collected on all birds to investigate their trophic status. Despite Zembra being the largest seabird colony in the Mediterranean (141,000 pairs), the per capita home-range of Scopoli’s shearwaters foraging from this colony was not larger than that of birds from much smaller colonies, indicating highly beneficial feeding grounds in the Gulf of Tunis and off Cap Bon. Considering depleted Mediterranean small pelagic fish stocks, supposed to be Scopoli’s shearwater prey base, we therefore speculate that birds may now also largely feed on zooplankton, something which is supported by our stable isotopic analyses. Crucially, shearwater at-sea feeding and resting areas showed very little overlap with a conservation hotspot recently defined on the western side of the Gulf of Tunis using meta-analyses of species distributions relative to anthropogenic threats. We therefore propose a major extension to this conservation hotspot. Our study stresses the importance of detailed biotelemetry studies of marine megafauna movement ecology for refining large-scale conservation schemes such as marine protected area networks.     

Model selection criteria for overdispersed data and their application to the characterization of a host-parasite relationship

In the statistical modeling of a biological or ecological phenomenon, selecting an optimal model among a collection of candidates is a critical issue. To identify an optimal candidate model, a number of model selection criteria have been developed and investigated based on estimating Kullback’s (Information theory and statistics. Dover, Mineola, 1968) directed or symmetric divergence. Criteria that target the directed divergence include the Akaike (2nd international symposium on information theory. Akadémia Kiadó, Budapest, Hungary, pp 267–281, 1973, IEEE Trans Autom Control AC 19:716–723, 1974) information criterion, AIC, and the “corrected” Akaike information criterion (Hurvich and Tsai in Biometrika 76:297–307, 1989), AICc; criteria that target the symmetric divergence include the Kullback information criterion, KIC, and the “corrected” Kullback information criterion, KICc (Cavanaugh in Stat Probab Lett 42:333–343, 1999; Aust N Z J Stat 46:257–274, 2004). For overdispersed count data, simple modifications of AIC and AICc have been increasingly utilized: specifically, the quasi Akaike information criterion, QAIC, and its corrected version, QAICc (Lebreton et al. in Ecol Monogr 62(1):67–118 1992). In this paper, we propose analogues of QAIC and QAICc based on estimating the symmetric as opposed to the directed divergence: QKIC and QKICc. We evaluate the selection performance of AIC, AICc, QAIC, QAICc, KIC, KICc, QKIC, and QKICc in a simulation study, and illustrate their practical utility in an ecological application. In our application, we use the criteria to formulate statistical models of the tick (Dermacentor variabilis) load on a white-footed mouse (Peromyscus leucopus) in northern Missouri.     

Complex national sampling design for long-term monitoring of protected dry grasslands in Switzerland

We describe a probabilistic sampling design of circular permanent plots for the long-term monitoring of protected dry grasslands in Switzerland. The population under study is defined by the perimeter of a national inventory. The monitoring focus is on the species composition of the protected grassland vegetation and derived conservation values. Efficient trend estimations are required for the whole country and for some predefined target groups (six biogeographical regions and eleven vegetation types). The target groups are equally important regardless of their size. Consequently, intensified sampling of the less frequent groups is essential for sample efficiency. The prior information needed to draw a targeted sample is obtained from the sampling frame and external databases. The logistics and generalized delineation of the target population may pose further problems. Thus, investments in fieldwork and travel time should be well balanced by selecting a cluster sample. Second, any access problems in the field and non-target units in the sample should be compensated for by selecting reserve plots as they otherwise may considerably reduce the effective sample size. Finally, the design has to be flexible as the sampling frame may change over time and sampling intensity might have to be adjusted to redefined budgets or requirements. Likewise, the variables and biological items of interest may change. To fulfil all these constraints and to optimally use the available prior information, we propose a multi-stage self-weighted unequal probability sampling design. The design uses modern techniques such as: balanced sampling, spreading, stratified balancing, calibration, unequal probability sampling and power allocation. This sampling design meets the numerous requirements of this study and provides a very efficient estimator.     

Solvent-free biodiesel epoxidation

Biodiesel emerged again recently as an alternative for fossil fuels. Besides energy, biodiesel can be used as raw material to synthesize high value products such as epoxides. Indeed, epoxides are versatile intermediates in organic synthesis for numerous reactions due to the high reactivity of the oxirane ring. Actually common epoxidation by peracids in organic solvent can last several hours according to the double bonds number. The solvent confers selectivity to the reaction, preventing di-hydroxylation. Alternatively solvent-free reactions can be done in shorter times, but hydroxylation is less controlled. Here, we set up the synthesis of epoxides from methyl and ethyl esters of waste cooking oil, without solvent or metal catalyst. We tested molar ratio of hydrogen peroxide and formic acid, double bond number, reaction time, and temperature. Results show that the highest epoxide yields and selectivity, with high conversion of the double bonds, were obtained for temperature reactions between 50 and 65 °C, reaction times from 2 to 3 h, and molar ratio of 20/2/1. For those conditions, the double bonds conversion is equal or near 100 %, with epoxide yield and selectivity between 85 and 93 %. Organic solvent suppression, besides being environmentally friendly, also saves reaction time and subsequent purification steps.     

Genotoxic effects of metals on human salivary gland tissue and lymphocytes as detected by the Comet assay

The etiology of salivary gland malignancies still remains unclear. Metal compounds are of special interest since they show ubiquitous presence in the environment, are present in many working places, and are accepted (co-)carcinogens in some other malignancies. Metals enter the body as xenobiotics by inhalation or ingestion. This study investigated the genotoxic potential of sodium dichromate (Na₂Cr₂O₇), nickel sulfate (NiSO₄), cadmium sulfate (CdSO₄) and zinc chloride (ZnCl₂) on human salivary gland cells and lymphocytes. Macroscopically healthy tissue of salivary glands was harvested from 46 patients during surgery and isolated to single cells by enzymatic digestion. The cells were incubated with Na₂Cr₂O₇, NiSO₄, CdSO₄ or ZnCl₂. Na₂Cr₂O₇ was also incubated in combination with the other metal compounds listed. Carcinogenic and co-carcinogenic effects of cadmium were tested by incubation with Na₂Cr₂O₇ and consecutive repair intervals. DNA damage and repair were evaluated by the Comet assay, determining DNA-strand breaks. The extent of damage was quantified using a digital analysis system. Na₂Cr₂O₇ produced significantly enhanced DNA-strand breaks in human salivary gland tissue and lymphocytes. All other metal compounds exerted no damaging effect on both cell types. Co-incubation of Na₂Cr₂O₇ with the other metals revealed a significant additive effect only for CdSO₄. Specific analysis of the influence of cadmium showed a reduction of DNA-repair after Na₂Cr₂O₇-induced strand breaks in salivary gland cells. This study provides evidence that exposure to distinct metals may significantly contribute to malignant salivary gland tumors. In consequence, further studies as epidemiological and toxicological data are warranted to determine the role of distinct metals as potential (co-) carcinogens.     

Dissolution behavior of metals from particulate matter emissions

Exposure to air particulate matter (PM) is linked to numerous health effects. In order to improve the understanding of the role of its metallic components, their solubility was examined by using serial short-contact dissolutions totalling 1?h and additional sequential contact periods of 1, 4, and 8 days. The dissolution experiments were performed in solutions containing the main biological electrolytes. ICPMS determinations were used to quantify the dissolved metals. The total compositions were determined after closed vessel microwave digestion. Large variations in the rate and completeness of the dissolutions were observed. Fast and extensive dissolutions within the short-contact time (e.g., Zn, Cd) as well as slow dissolutions persisting during the last contact period (e.g., Ni, Cu, Sb, Pb) were found for smelting emissions. The multi-element determinations also made it possible to identify relationships between dissolution of different metals and define gradual composition changes of residual PM. When comparing with dissolutions performed in de-ionized water, similar major fractions were observed at short-contact time for minor components of smelting or combustion emissions (e.g., V, Ni, Cd), suggesting a preponderance of easily available forms at the surface of the relatively inert particle cores. The use of these time sequential methods may help in (1) modeling metal partitioning in biological media and (2) investigating the causes of adverse effects attributed to air PM.