基于物联网技术的滑坡监测数据自动采集系统研究∗

针对传统滑坡监测数据采集系统布线困难、自动化程度低、成本高等问题,设计了一种基于物联网技术的滑坡监测数据自动采集系统。该系统以 ZigBee 无线传感器网络、无线通信技术为核心,通过布置在滑坡体上的传感器节点采集数据。利用 ZigBee 协议和互联网将数据实时传输到监控中心,使相关工作人员及时掌握滑坡体信息。 以三峡库区八字门滑坡为例,分析了该滑坡当前监测手段的不足,建立了八字门滑坡的物联网监测系统,分别对系统的硬件组成和软件程序进行设计。针对节点能量供应和数据远程传输问题,提出将太阳能供电系统和北斗短报文模块应用到数据采集系统来弥补野外条件的不足。结合八字门滑坡的地形地质条件,优化了滑坡测点的布置方案,并开发了数据采集界面以实现监测数据的自动采集和直观显示。     

风力发电机组低电压穿越能力的试验分析

针对多起因系统故障引起电压跌落,导致风力发电机组脱网事故,对风电机组的低电压穿越能力进行分析,采用风电机组低电压穿越移动测试装置对风电机组进行低电压穿越能力测试。测试结果表明:风电机组低电压穿越能力测试可以精确记录风电机组低电压穿越期间电压、电流等各项参数指标,对并网风机及系统的稳定运行意义重大。     

隔震建筑概念设计的基本问题

在隔震建筑的设计过程中应首先进行概念设计,在总体上把握隔震结构设计的主要方面。本文论述了隔震建筑概念设计的基本问题。在概念设计阶段,首先应在目标设计概念指导下,综合隔震建筑安全性与投资水平的平衡,确定建筑是采用隔震结构还是抗震结构。在进行隔震设计时,应根据输入地震动的加速度幅值和主频,建筑的允许加速度等值确定隔震结构的固有频率;应根据隔震系数和隔震层的允许位移合理确定隔震层总体刚度的范围。对隔震建筑的上部结构,应选择有利房型,合理布置结构,减小结构的不利地震反应。     

实施最严格的野生动物保护:中国现状与改革方向

随着全球工业化和城市化的快速发展,野生动物及其栖息地保护面临着前所未有的挑战。本文识别了我国的野生动物保护存在的主要问题:(1)现行《野生动物保护法》对野生动物保护范围界定过窄,资源利用主导思维干扰了野生动物保护,缺乏对生态系统与生物安全的足够重视。(2)由于现行野生动物保护立法、执法和管理制度不健全甚至缺失,导致野生动物驯养繁殖交易市场长期混乱,甚至成为非法野生动物交易的"洗白工具"。(3)社会公众群体尊重和保护野生动物意识淡薄,全民参与和监督举报机制不健全。本文认为,我国应该实施最严格的野生动物保护制度,实现人与野生动物平等、文明、和谐相处,建议:(1)树立尊重野生动物物种生存权、人与野生动物文明和谐相处的理念,摒弃野生动物资源利用观,重构人与野生动物平等共存关系。(2)清晰界定野生动物法律定义,扩大野生动物保护范围,围绕捕猎、繁育、运输、储存、转让、食用等环节,全面、科学、精准地构建最严格的野生动物保护制度。(3)立足于全面保护野生动物,严格禁止滥食滥用野生动物和过度商业化利用,实行野生动物保护利用特许制度,并大幅提高标准严格控制交易和利用,建立职责清晰的执法监管和惩治体系。(4)建立最严格的野生动物保护公众参与和司法治理体系,实施野生动物非法贸易、猎杀的行政公益诉讼制度,引导公众建立爱护保护野生动物、不食不用野生动物的文明行为,最终实现人类社会与野生动物的文明和谐共处。     

SiO2气凝胶隔热性能的影响因素研究

目的 在不同热流条件下,通过调整SiO2气凝胶的孔隙率、涂层厚度等,以满足合适的隔热要求。方法 针对中短程飞行器飞行时外壁面承受短时高热流的特点,在分析孔隙率对SiO2气凝胶热导率影响规律的基础上,通过数值仿真研究不同气凝胶孔隙率、气凝胶厚度及热流作用下的温度响应。结果 得到了不同条件下满足隔热要求的气凝胶最小厚度,以及气凝胶表面的最高温度。高温情况下,气凝胶孔隙率为96%时,有效热导率最低,孔隙率超过96%时,隔热性能变差。结论 当飞行器内壁面温度满足要求时,增大气凝胶的孔隙率,则需要减小气凝胶的厚度,相应的气凝胶表面温度会升高,但升幅很小。当飞行器外壁面承受长时间大热流时,仅调整气凝胶的厚度和孔隙率不能达到结构的隔热要求。     

区域生态环境服务价值评估 --以延安市宝塔区为例

将小尺度行政区域作为研究对象,建立区域生态环境服务价值评估模型。模型重点考虑了2个方面:第一,主体生态系统对区域生态环境服务价值的贡献大小及主体生态系统之间的相互影响;第二,估算主体生态系统价值时考虑直接使用价值、间接使用价值、非使用价值的重复或遗漏及生态环境服务价值随社会经济的变化。以陕西延安市宝塔区为例进行评估,得到2002年宝塔区生态环境服务价值为118322.214万元。     

Utilization of solidified phosphogypsum as Portland cement retarder

The utilization of the phosphogypsum (PG) as cement retarder is both an economical and an ecological approach to treat this solid waste. Cement using raw PG as retarder has two problems pressing for solution,namely, delaying the setting time and difficulty being fed into the cement mill. The soluble phosphates in PG behave as super-retarder and bring about retarding in the setting process of cement made with PG. Two types of solidified phosphogypsum (SPG) were prepared to solve those two problems. The strength and the water stability of the SPG were good enough to ensure that they may be conveyed easily and fed into the cement mill stably. The cements with SPG had a similar setting time and strength as cement made with natural gypsum (NG). The microstructure of two kinds of SPG were observed with SEM. During factory application of SPG, good techniques and economic benefits were obtained.     

Quantitative assessment of the differential coastal vulnerability associated to oil spills

The risk associated with a given hazard (natural or technological) generally results from the interaction between the hazard potential and the vulnerability. This paper is centred on the assessment of the vulnerability variable. A quantitative vulnerability assessment and mapping methodology is proposed, with two main specificities: (1) it is hazard- and spatially-centred (respectively, oil spills and coastal areas) and; (2) the spatial segregation level used is the municipality. Due to the geographic context of the Portuguese mainland coast, the proposed methodology was applied in an attempt to illustrate the spatial distribution and the degree of the vulnerability associated to oil spills for mainland Portugal coastal municipalities. A final map is presented together with other informative elements. Analysis and discussion of the results allows for the understanding that: (1) there is a very heterogeneous and differential distribution of the degree of vulnerability to oil spills along the Portuguese coastline; (2) the application of specific hazard-centred and spatially-centred vulnerability assessment methodologies, comprising multi-dimensional indicators (e.g., geographic, ecological, demographic, social and economic), produces more robust and realistic results, highlighted by a thorough and spatially detailed analysis; and (3) future research is required on vulnerability assessment in Portugal; along side, hazard potential assessment methodologies must also be developed in order to create a final risk profile, which can be an extremely useful tool in spatial planning and management.     

Water-dispersible nano-pollutions reshape microbial metabolism in type-specific manners: A metabolic and bacteriological investigation in Escherichia coli

• Water-dispersible nano-pollutions exhibit type-specific toxic effects on E. coli. • Global metabolite profiling was used to characterize metabolic disruption patterns. • Key dysregulated metabolites responsive to nano-pollution exposures were found. • Amino acid metabolism and purine metabolism are perturbed at nano-pollutions. Incomplete separation and recycling of nanoparticles are causing undesirable nanopollution and thus raising great concerns with regard to nanosafety. Since microorganisms are important regulator of physiological processes in many organisms, the interaction between nanopollution and microbial metabolomics and the resultant impact on the host’s health are important but unclear. To investigate how typical nanopollution perturbs microbial growth and metabolism, Escherichia coli (E. coli) in vitro was treated with six water-dispersible nanomaterials (nanoplastic, nanosilver, nano-TiO₂, nano-ZnO, semiconductor quantum dots (QDs), carbon dots (CDs)) at human-/environment-relevant concentration levels. The nanomaterials exhibited type-specific toxic effects on E. coli growth. Global metabolite profiling was used to characterize metabolic disruption patterns in the model microorganism exposed to different nanopollutants. The percentage of significant metabolites (p<0.05, VIP>1) accounted for 6%–38% of the total 293 identified metabolites in each of the nanomaterial-contaminated bacterial groups. Metabolic results also exhibited significant differences between different nanopollutants and dose levels, revealing type-specific and untypical concentration-dependent metabolic responses. Key metabolites responsive to nanopollution exposures were mainly involved in amino acid and purine metabolisms, where 5, 4, and 7 significant metabolic features were included in arginine and proline metabolism, phenylalanine metabolism, and purine metabolism, respectively. In conclusion, this study horizontally compared and demonstrated how typical nanopollution perturbs microbial growth and metabolomics in a type-specific manner, which broadens our understanding of the ecotoxicity of nanopollutants on microorganisms.     

双室微生物燃料电池不同接种条件下处理薯蓣素废水

比较了在5种不同接种条件下,利用双室微生物燃料电池(Microbial Fuel Cells,MFCs)处理薯蓣素生产废水的污染物去除和产电效果. 结果表明,该种废水可以用作微生物燃料电池的底物,在去除有机物的同时能够获得电能;采用全混合接种对污染物的去除效果最好,在350 h时COD_Cr去除率达到90%;采用污水处理厂厌氧污泥和薯蓣素废水驯化菌液混合接种的产电效果最好,在1 000 Ω的外电阻下得到了370 mV的输出电压,最大输出功率密度达到10.32 mW/m2;不同菌属在MFCs中的作用差别显著,产电与去污功能可能由不同优势菌属承担;初步富集到优势菌菌b,菌d和菌e;PCR-DGGE和DNA序列分析结果显示,菌d和菌e与β-变形菌具有较好的同源性.