Distributions of zinc, copper, cadmium and lead in a tropical ultisol after long-term disposal of sewage sludge

Heavy metals present in soils constitute serious environmental hazards from the point of view of polluting the soils and adjoining streams and rivers. The distribution of heavy metals in a sandy Ultisol (Arenic Kandiustult) in south eastern Nigeria subjected to 40 years disposal of sewage wastes (sludge and effluents) was studied using two profile pits (S/NSK/1 and S/NSK/2) sited in the sewage disposal area and one profile pit (NS/NSK) sited in the non-sewage disposal area. Soil samples were collected in duplicate from these soil horizons and analyzed for their heavy metal contents. The mean concentrations of Zn, Cu, Cd and Pb in the top- and sub-soil horizons of sewage soil were 79.3, 32, 0.29 and 1.15 mg/kg, respectively. These levels were high enough to constitute health and phytotoxic risks. All the metal levels were much higher in the AB horizon in the sewage than in the non-sewage soil profile, but Pb and Cu contents were also high down to the Bt1 horizon, indicating their apparent relatively high mobility in this soil. There was a significant correlation between organic matter (OM) and Zn (r=0.818**), and between OM and Cd (0.864**) in the sewage soil. The high OM status of the sewage sludge, together with its corresponding low pH, might have favoured metal-OM complexation that could reduce heavy metal mobility and phytotoxicity in this soil.     

Analysis of microcystins in cyanobacteria blooms and surface water samples from Meiliang Bay,Taihu Lake,China

Taihu Lake is the third largest freshwater lake in China. In recent years, the water pollution of cyanobacteria blooms has become a severe problem in this area. Microcystins (MCs) are an important group of toxic compounds mainly produced by some cyanobacteria species and have both acute and chronic hepatotoxic effects on animals and humans. This paper presents the first data on the identification and detection of MCs in both natural occurring cyanobacteria blooms and surface water samples (0-0.5 m), collected from Meiliang Bay, Taihu Lake, China. A conventional method for extraction and isolation of MCs from cyanobacteria blooms was applied. High-performance liquid chromatography (HPLC) analysis showed that the main toxic component in the cyanobacteria materials was MC-LR. The monoclonal antibody (mAb) against MC-LR produced by hybridoma technique was employed for direct competitive ELISA to detect the concentrations of MCs in bloom and water samples collected in 2001. The results not only revealed the presence of MCs but also temporal variations of MCs levels of three sampling stations in Meiliang Bay in 1 year. It is obvious that the MC contents were relatively higher during warm months and related with the status of eutrophication. Our study indicates the threat associated with MCs in water body of Taihu Lake. To prevent the MCs potential hazard on public health in this area, some necessary measures of monitoring and control of growth of cyanobacteria are urgently needed.     

Availability of 99Tc in undisturbed soil cores

Models for safety assessment of radioactive waste repositories need accurate values of the soil-to-plant transfer of radionuclides. In oxidizing environments, (99)Tc is expected to occur as pertechnetate ((99)TcO(4)(-)). Due to its high mobility, leaching of this element in the field might be important, potentially affecting the reliability of estimated transfer parameters of (99)Tc as measured in closed experimental systems such as hydroponics or pot experiments. The aim of this experiment was to measure the leaching of (99)Tc in undisturbed irrigated soil cores under cultivation as well as plant uptake and to study the possible competition between the two transfer pathways. Undisturbed soil cores (50 x 50 cm) were sampled from a Rendzic Leptosol (R), a colluvial Fluvic Cambisol (F) and a Dystric Cambisol (D) using PVC tubes (three cores sampled per soil type). Each core was equipped with a leachate collector at the bottom, allowing the monitoring of (99)Tc leaching through the cores. Cores were placed in a greenhouse and maize (Zea mays L., cv. DEA, Pioneer) was sown. After 135 d, maize was harvested and radioactivity determined in both plant and water samples. Results showed that during the growing period, leaching of (99)Tc was limited, due to the high evapotranspiration rate of maize. After harvest, leaching of (99)Tc went on because of the absence of evapotranspiration. Effective uptake (EU) of (99)Tc in leaves and grains was calculated. EU reached 70% of the input in the leaves and was not significantly different among soils. These results confirmed those obtained from pot experiments, even though leaching was allowed to occur in close-to-reality hydraulical conditions. As a consequence, it was concluded that pot experiments are an adequate surrogate for more complex "close-to-reality" experimental systems for measuring transfer factors.     

Forest protection and economic development by offshoring wood extraction: Bhutan’s clean development path

With globalization, virtual exchanges of natural resources embodied in traded commodities redistribute geographically land use and its environmental impacts. Benefits of national forest protection may be undermined at the global-scale by leakage through international trade. We studied land use displacement associated with national policies to protect forests in Bhutan. This case study provides a simple situation: a dominant forest cover almost unaffected by agricultural expansion, a rural economy dominated by the primary sector, centralized forest conservation policies, and a dominant trading partner. We assessed the net effects at the international level of the Bhutanese forest protection policies by accounting for trade in wood products with India. Our results show that these policies have been effective in maintaining a high forest cover, but have been accompanied by an increasing displacement of forest use to India. In 1996–2011, the difference between the total volume of wood imported from India and the total volume exported from Bhutan—i.e., the net displacement—corresponds to 27 % of the total volume consumed in Bhutan. In 2011, 68 % of the total forest area required to produce the wood consumed in Bhutan was located in India. The wood imported by Bhutan was likely originating from tree plantations in the northeastern Indian states. Since Bhutan has few tree plantations and very valuable natural forests, the net international-level ecological impacts of this land use displacement is arguably positive. Most of the wood imports of Bhutan were wood charcoal for its emerging chemical industries. This case of displacement reflects functional upgrading in the value-chain rather than an externalization of consumption-based environmental costs. Through its government policies, Bhutan has managed to support its economic development while protecting its forests and leapfrogging the negative impacts on forests generally associated with the early stages of modernization.     

Analytic framework for assessing participation processes and outcomes of climate change adaptation tools

The assumptions and empirical evidence linking climate change adaptation to development cooperation have led to the emergence of a range of climate change adaptation tools aiming at improving the quality of development cooperation initiatives in times of global change. In order to assess the quality of these tools, we develop an analytic framework to critically assess the social learning and sustainable development outcomes of climate change adaptation tools. The analytic framework defines project objectives, participation typology, participation tools, participation stages, scenarios development, modelling exercises, stakeholder analysis and risk communication strategies that support quality participation outcomes.     

Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.     

Risk assessment and pathway study of arsenic in industrially contaminated sites of Hyderabad: a case study

Different areas in the industrial region of Patancheru near Hyderabad, Andhra Pradesh (A.P), India are contaminated with high concentration of arsenic, which is attributed to industrial source like veterinary chemicals, pharmaceuticals, pesticide industries, etc. Fourteen villages of this area of Patancheru were assessed for arsenic contamination by collecting samples of water (surface and ground), soil, fodder, milk, and vegetables. The total arsenic content in the whole blood, urine, hair, and nails of the residents showing arsenical skin lesions and other clinical manifestations were also studied. To understand the bioavailability of arsenic in this environment and its possible entry into human food chain, speciation studies of arsenic was carried out and the results are presented in this paper.     

Chlorinated paraffins: a review of analysis and environmental occurrence

Chlorinated paraffins (CPs), as technical mixtures of polychlorinated alkanes (PCAs), are ubiquitous in the environment. CPs tend to behave in a similar way to persistent organic pollutants (POPs), leading several countries to impose regulations on the use of CPs. In this article, we review the literature on the properties of CPs, the current analytical tools available to determine CPs in various types of environmental matrices, and concentrations found in the environment. In particular, concentrations of CPs in environmental compartments including air, water, sediments, biota, human food products and human tissues are summarized. Priorities for future research are: improvements in analytical methodologies (reducing the complexity of the analysis, producing reference materials and performing interlaboratory studies); determining background levels of chlorinated paraffins in the environment and human populations (this question should be answered using quality assured analytical tools allowing the intercomparison of data); and investigating the sources of CPs to the environment and to humans.     

Towards a general relationship between climate change and biodiversity: an example for plant species in Europe

Climate change is one of the main factors that will affect biodiversity in the future and may even cause species extinctions. We suggest a methodology to derive a general relationship between biodiversity change and global warming. In conjunction with other pressure relationships, our relationship can help to assess the combined effect of different pressures to overall biodiversity change and indicate areas that are most at risk. We use a combination of an integrated environmental model (IMAGE) and climate envelope models for European plant species for several climate change scenarios to estimate changes in mean stable area of species and species turnover. We show that if global temperature increases, then both species turnover will increase, and mean stable area of species will decrease in all biomes. The most dramatic changes will occur in Northern Europe, where more than 35% of the species composition in 2100 will be new for that region, and in Southern Europe, where up to 25% of the species now present will have disappeared under the climatic circumstances forecasted for 2100. In Mediterranean scrubland and natural grassland/steppe systems, arctic and tundra systems species turnover is high, indicating major changes in species composition in these ecosystems. The mean stable area of species decreases mostly in Mediterranean scrubland, grassland/steppe systems and warm mixed forests.     

Evaluating and reducing a model of radiocaesium soil-plant uptake

An existing model of radiocaesium transfer to grasses was extended to include wheat and barley and parameterised using data from a wide range of soils and contact times. The model structure was revised and evaluated using a subset of the available data which was not used for model parameterisation. The resulting model was then used as a basis for systematic model reduction to test the utility of the model components. This analysis suggested that the use of 4 model variables (relating to radiocaesium adsorption on organic matter and the pH sensitivity of soil solution potassium concentration) and 1 model input (pH) are not required. The results of this analysis were used to develop a reduced model which was further evaluated in terms of comparisons to observations. The reduced model had an improved empirical performance and fewer adjustable parameters and soil characteristic inputs.