Comparison between the accumulation capacity of four lichen species transplanted to a urban site

The capacity to accumulate trace elements from the atmosphere of the lichens Hypogymnia physodes, Parmelia sulcata, Pseudevernia furfuracea and Usnea gr. hirta transplanted to an urban site of N Italy was compared. Twenty-nine elements (Al, As, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hg, I, K, La, Mg, Mn, Ni, Pb, Rb, Sb, Sc, Se, Sm, Th, Ti, V, Zn) were analyzed by Instrumental Neutron Activation Analysis (INAA) and Electro-Thermal Atomic Absorption Spectroscopy (ET-AAS). The ratio between the concentrations of each element in exposed samples to that of control samples (exposed-to-control ratio and EC ratio) was used to investigate the accumulation rates of lichen thalli. The results showed that in general elements did not exhibit well defined trends, but rather showed fluctuations, and indicated that H. physodes, P. furfuracea and U. gr. hirta have a similar accumulation capacity, while that of P. sulcata is lower.     

Modeling in-situ uranium(VI) bioreduction by sulfate-reducing bacteria

We present a travel-time based reactive transport model to simulate an in-situ bioremediation experiment for demonstrating enhanced bioreduction of uranium(VI). The model considers aquatic equilibrium chemistry of uranium and other groundwater constituents, uranium sorption and precipitation, and the microbial reduction of nitrate, sulfate and U(VI). Kinetic sorption/desorption of U(VI) is characterized by mass transfer between stagnant micro-pores and mobile flow zones. The model describes the succession of terminal electron accepting processes and the growth and decay of sulfate-reducing bacteria, concurrent with the enzymatic reduction of aqueous U(VI) species. The effective U(VI) reduction rate and sorption site distributions are determined by fitting the model simulation to an in-situ experiment at Oak Ridge, TN. Results show that (1) the presence of nitrate inhibits U(VI) reduction at the site; (2) the fitted effective rate of in-situ U(VI) reduction is much smaller than the values reported for laboratory experiments; (3) U(VI) sorption/desorption, which affects U(VI) bioavailability at the site, is strongly controlled by kinetics; (4) both pH and bicarbonate concentration significantly influence the sorption/desorption of U(VI), which therefore cannot be characterized by empirical isotherms; and (5) calcium-uranyl-carbonate complexes significantly influence the model performance of U(VI) reduction.     

Measuring and modelling experimental densities and ultrasonic velocities of aromatic and halogenated environmental pollutants

The potential environmental impact of aromatic and halogenated chemicals from the petrochemical and steel industry is of growning concern. The present paper deals with the modelling and experimental determination of density and speed of sound at the range 278.15-323.15 of six aromatic and halogenated compounds (Benzene, Toluene, Ethylbenzene, Fluorobenzene, 2-Fluorotoluene and Chlorobenzene). Fitting equations were applied to the data in order to correlate for later computer based design. The estimation of the studied properties was made by the application of different theoretical procedures. The Mchaweh-Nasrifar-Moshfeghian model (MNM), an equation of state based on the generalized van der Waals theory which combines the Staverman-Guggenheim combinatorial term of lattice statistics with an attractive lattice gas expression and the Free Length Theory showed a good response at the studied conditions.     

Biological denitrification of high strength nitrate waste using preadapted denitrifying sludge

Denitrification of synthetic high nitrate waste containing 9032 ppm NO(3)-N (40,000 ppm NO(3)) in a time period of only 6h has been achieved in our previous study using activated sludge. The activated sludge culture was acclimatized by a stepwise increase in the nitrate concentration of synthetic waste. In the present work, studies were carried out on the changing microbial population of the sludge and the physiology of nitrate metabolism during the various stages of adaptation process to high strength synthetic nitrate waste. During the course of adaptation, with an increase in the nitrate concentration, a sharp increase in the number of denitrifiers was found with an equally rapid decrease in the nitrifying community. Two key enzymes involved in the first two steps of the denitrification process were also studied during this period. The results of the study suggest that specific enzyme levels increase as the activated sludge adapts itself to higher nitrate concentrations. Biological denitrification of high nitrate waste is a slow process and to increase the rate of denitrification, parameters such as pH, temperature, C:N and biomass concentration of the process were optimized using orthogonal array method. Optimized conditions increased the specific nitrate reduction rate by 54% and specific nitrite reduction rate by 45%.     

Heavy metal resistance and genotypic analysis of metal resistance genes in gram-positive and gram-negative bacteria present in Ni-rich serpentine soil and in the rhizosphere of Alyssum murale

Forty-six bacterial cultures, including one culture collection strain, thirty from the rhizosphere of Alyssum murale and fifteen from Ni-rich soil, were tested for their ability to tolerate arsenate, cadmium, chromium, zinc, mercury, lead, cobalt, copper, and nickel in their growth medium. The resistance patterns, expressed as minimum inhibitory concentrations, for all cultures to the nine different metal ions were surveyed by using the agar dilution method. A large number of the cultures were resistant to Ni (100%), Pb (100%), Zn (100%), Cu (98%), and Co (93%). However, 82, 71, 58 and 47% were sensitive to As, Hg, Cd and Cr(VI), respectively. All cultures had multiple metal-resistant, with heptametal resistance as the major pattern (28.8%). Five of the cultures (about of 11.2% of the total), specifically Arthrobacter rhombi AY509239, Clavibacter xyli AY509235, Microbacterium arabinogalactanolyticum AY509226, Rhizobium mongolense AY509209 and Variovorax paradoxus AY512828 were tolerant to nine different metals. The polymerase chain reaction in combination with DNA sequence analysis was used to investigate the genetic mechanism responsible for the metal resistance in some of these gram-positive and gram-negative bacteria that were, highly resistant to Hg, Zn, Cr and Ni. The czc, chr, ncc and mer genes that are responsible for resistance to Zn, Cr, Ni and Hg, respectively, were shown to be present in these bacteria by using PCR. In the case of, M. arabinogalactanolyticum AY509226 these genes were shown to have high homology to the czcD, chrB, nccA, and mer genes of Ralstonia metallidurans CH34. Therefore, Hg, Zn, Cr and Ni resistance genes are widely distributed in both gram-positive and gram-negative isolates obtained from A. murale rhizosphere and Ni-rich soils.     

Sulfidation treatment of molten incineration fly ashes with Na2S for zinc, lead and copper resource recovery

The present study focuses on the conversion of heavy metals involved in molten incineration fly ashes to metal sulfides which could be thereafter separated by flotation. The sulfidation treatment was carried out for five molten incineration fly ashes (Fly ash-A to Fly ash-E) by contacting each fly ash with Na(2)S solution for a period of 10 min to 6h. The initial molar ratio of S(2-) to Me(2+) was adjusted to 1.20. The conversion of heavy metals to metal sulfides was evaluated by measuring the S(2-) residual concentrations using an ion selective electrode. The formation of metal sulfides was studied by XRD and SEM-EDS analyses. In the case of Fly ash-A to Fly ash-D, more than 79% of heavy metals of zinc, lead and copper was converted to metal sulfides within the contacting period of 0.5h owing to a fast conversion of metal chlorides to metal sulfides. By contrast, the conversion of about 35% was achieved for Fly ash-E within the same contacting period, which was attributed to a high content of metal oxides. Further, the S(2-) to Me(2+) molar ratio was reduced to 1.00 to minimize Na(2)S consumption and the conversions obtained within the contacting period of 0.5h varied from 76% for Fly ash-D to 91% for Fly ash-C. Finally, soluble salts such as NaCl and KCl were removed during the sulfidation treatment, which brought about a significant enrichment in metals content by a factor varying from 1.5 for Fly ash-D to 4.9 for Fly ash-A.     

Bacteria transport and deposition under unsaturated conditions: the role of the matrix grain size and the bacteria surface protein

Unsaturated (80% water saturated) packed column experiments were conducted to investigate the influence of grain size distribution and bacteria surface macromolecules on bacteria (Rhodococcus rhodochrous) transport and deposition mechanisms. Three sizes of silica sands were used in these transport experiments, and their median grain sizes were 607, 567, and 330 microm. The amount of retained bacteria increased with decreasing sand size, and most of the deposited bacteria were found adjacent to the column inlet. The deposition profiles were not consistent with predictions based on classical filtration theory. The experimental data could be accurately characterized using a mathematical model that accounted for first-order attachment, detachment, and time and depth-dependent straining processes. Visual observations of the bacteria deposition as well as mathematical modelling indicated that straining was the dominant mechanism of deposition in these sands (78-99.6% of the deposited bacteria), which may have been enhanced due to the tendency of this bacterium to form aggregates. An additional unsaturated experiment was conducted to better deduce the role of bacteria surface macromolecules on attachment and straining processes. In this case, the bacteria surface was treated using a proteolitic enzyme. This technique was assessed by examining the Fourier-transform infrared spectrum and hydrophobicity of untreated and enzyme treated cells. Both of these analytical procedures demonstrated that this enzymatic treatment removed the surface proteins and/or associated macromolecules. Transport and modelling studies conducted with the enzyme treated bacteria, revealed a decrease in attachment, but that straining was not significantly affected by this treatment.     

Estimates of ambient background concentrations of trace metals in soils for risk assessment

Site-specific or soil type-specific ambient background concentrations (ABCs) of trace metals in soils are needed for risk assessment. We investigated three different methods for estimating ABCs in soils using a dataset of 5691 soil samples from England and Wales. The concentrations of Co, Cr and Ni were strongly associated with Al and Fe, and multiple regressions explained 62-85% of their variation, and Al and Fe can therefore be used to predict ABCs for these metals. Soil texture had a major influence on the concentrations of Cd, Co, Cr, Cu, Ni and Zn, and the medians were 3-5 fold higher in clayey than in sandy soils. This was used to predict texture-specific ABCs. Lead concentration was higher in acidic peaty soils than in other soils. A probability graph method was used to estimate ABC for Pb in a population of relatively uncontaminated soils. Potential applications of ABCs are discussed.     

Binding affinity of proanthocyanidin from waste Pinus radiata bark onto proline-rich bovine achilles tendon collagen type I

Binding affinity of proanthocyanidin (PA) purified from Pinus radiata bark waste onto bovine Achilles tendon collagen (type I) was studied. Adsorption of PA onto the collagen was optimized by examining pH, contact time and temperature. The adsorption was pH-dependent. The maximum adsorption capacity (Q(0)) of PA on collagen was found to be 211 mg g(-1) using the Langmuir isotherm. Comparison between two adsorbents also showed that collagen had higher adsorptivity of approximately 20% more than PVPP (polyvinyl polypyrrolidone). The high affinity between PA and collagen was further confirmed in solvent solubility experiments. The observed solvent resistance was thought to be mainly due to a hydrophobic stacking mechanism reinforced by hydrogen bonding. FT-IR spectra clearly indicated the presence of PA adsorbed on collagen. The results have interesting implications that PA can be a good protective agent for collagen against collagenase and other enzymes.     

Biosurfactant technology for remediation of cadmium and lead contaminated soils

This research focuses on column experiments conducted to evaluate the potential of environmentally compatible rhamnolipid biosurfactant produced by Pseudomonas aeruginosa strain BS2 to remove heavy metals (Cd and Pb) from artificially contaminated soil. Results have shown that di-rhamnolipid removes not only the leachable or available fraction of Cd and Pb but also the bound metals as compared to tap water which removed the mobile fraction only. Washing of contaminated soil with tap water revealed that approximately 2.7% of Cd and 9.8% of Pb in contaminated soil was in freely available or weakly bound forms whereas washing with rhamnolipid removed 92% of Cd and 88% of Pb after 36 h of leaching. This indicated that di-rhamnolipid selectively favours mobilization of metals in the order of Cd>Pb. Biosurfactant specificity observed towards specific metal will help in preferential elution of specific contaminant using di-rhamnolipid. It was further observed that pH of the leachates collected from heavy metal contaminated soil column treated with di-rhamnolipid solution was low (6.60-6.78) as compared to that of leachates from heavy metal contaminated soil column treated with tap water (pH 6.90-7.25), which showed high dissolution of metal species from the contaminated soil and effective leaching of metals with treatment with biosurfactant. The microbial population of the contaminated soil was increased after removal of metals by biosurfactant indicating the decrease of toxicity of metals to soil microflora. This study shows that biosurfactant technology can be an effective and nondestructive method for bioremediation of cadmium and lead contaminated soil.