Water solubility enhancements of pyrene by single and mixed surfactant solutions

ＩｎｔｒｏｄｕｃｔｉｏｎＳｕｒｆａｃｔａｎｔｓｅｎｈａｎｃｅｔｈｅｒｅｍｅｄｉａｔｉｏｎｏｆＮＡＰＬ ｃｏｎｔａｍｉｎａｔｅｄｓｉｔｅｓｂｙｉｎｃｒｅａｓｉｎｇｔｈｅａｑｕｅｏｕｓ ｐｈａｓｅｃｏｎｃｅｎｔｒａｔｉｏｎｏｆｔｈｅＮＡＰＬｖｉａｍｉｃｅｌｌｅｆｏｒｍａｔｉｏｎ ,ｍｉｃｒｏｅｍｕｌｓｉｆｉｃａｔｉｏｎ ,ｏｒｍｏｂｉｌｉｚｉｎｇｔｈｅＮＡＰＬｐｈａｓｅ (Ｋｉｌｅ ,1989;Ｅｄｗａｒｄｓ,1991;Ｇｕｈａ ,1998ａ ;Ｋｏ ,1998;Ｚｉｍｍｅｒｍａｎ ,1999;Ｂｅｔｔａｈａｒ,1999;Ｗｉｌｌｓｏｎ ,1999;Ｐａ…     

Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process

The application of ultrasonic-electrolysis process for the removal of copper is studied.In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution.Thus increases metal deposition on the cathode surface.The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

Vertical gradients of ozone and carbon dioxide within a deciduous forest in Central Pennsylvania

Ambient concentrations of ozone (O(3)) and carbon dioxide (CO(2)) were measured at locations from the forest floor to the top of the canopy in a deciduous forest at the Moshannon State Forest in northcentral Pennsylvania. O(3) concentrations were measured from May-September for three years (1993-1995) while CO(2) concentrations were measured only during July and August of 1994. O(3) concentrations increased steadily during the day at all locations, peaking during the middle to late afternoon hours. O(3) concentrations then steadily declined to their lowest point, just before dawn. Vertical O(3) concentration gradients varied seasonally and among years. However, O(3) concentrations were highest within the forest canopy and lowest at the forest floor, with an average difference of approximately 13%. Differences in O(3) concentrations between the canopy and forest floor were greatest at night. O(3) concentrations were slightly higher at locations within the canopy than above the canopy. CO(2) concentrations were consistenly higher near the forest floor and were higher above the canopy than within the canopy. CO(2) concentrations were higher at night than during the day at all locations, especially near the forest floor.     

Organic carbon concentration profiles in recent cave sediments: records of agricultural pollution or diagenesis?

Recent (<7 years old) cave sediments in Speedwell Cavern, Derbyshire, show an approximately exponential decay of organic carbon with depth. This phenomenon was thought to be due to one of two causes: (i) changing agricultural practice within the catchment feeding the cave, especially the increased use of sewage sludge and animal slurry as fertilizer; (ii) a relatively constant organic carbon concentration over time in the input sediment, with subsequent carbon mineralization during diagenesis. Carbon isotope composition of the organic material and the evolution of H/C ratio with depth indicate that the latter hypothesis is correct and that the profiles result from microbial diagenesis, not increased organic carbon inputs. By comparison with sediment of known (7 years) age, temporal decay constants for organic matter can be derived; these lie between rates previously determined for organic matter decomposition in marine sediments and soils. The H/C ratio of organic matter can be modelled as a function of time and proceeds in a similar fashion to soil organic material.     

Mass transfer resistance in ASFF reactors for waste water treatment

Analysis of mass transfer resistances was performed for an aerated submerged fixed-film reactor (ASFF) for the treatment of waste water containing a mixture of sucrose and ammonia. Both external and internal mass transfer resistances were considered in the analysis, and characterized as a function of feed flow-rate and concentration. Results show that, over a certain operating regime, external mass transfer resistance in the system was greater for sucrose removal than ammonia. This is because the reaction rates for carbon removal were much larger than those of nitrogen. As a result, existence of any form of mass transfer resistance caused by inadequate mixing or diffusion limitations, strongly affects the overall removal rates of carbon more than nitrogen. Effects of the internal m?ss transfer resistance were virtually non-existent for ammonia removal. This behaviour was found over two orders of magnitude range for the effective diffusivity for ammonia, and one order of magnitude for the film specific surface area. However, over the same parameters' range, it is found that sucrose removal was strongly affected upon lowering its effective diffusivity and increasing the film specific surface area.     

A model describing the complexing effect in the leaching of aluminum from cooking utensils

A simple model describing the complexing effect in the leaching of aluminum from cooking utensils is presented in this paper. Some experimental results obtained by previous workers may be explained by this model, which demonstrates that the complexing effect takes a very important role in the process of aluminum liberated from cooking utensils. Increased concentrations of complexing ions (organic acids, fluoride ion, OH-, etc.) significantly enhance the release of aluminum. The speciation of aluminum in simulated food solution is also investigated. The model suggests that in the pH range of most food (pH 4-8) aluminum present is predominantly in the form of organic Al-complexes, which is harmful to the human body.     

Long-term trends and sources of organochlorine contamination in Canadian tundra Peregrine Falcons, Falco peregrinus tundrius

Levels of eggshell thinning, and organochlorine residues in egg contents, blood plasma of adults and juveniles, tissue samples, and prey species were determined for a population of migratory Peregrine Falcons (Falco peregrinus tundrius) breeding in the Canadian Arctic. Temporal trends were assessed by comparing data collected during 1991-1994, with data from 1982-1986, for the same population. Shells (n=54) from 1991-1994 averaged 15% thinner than eggs produced prior to the introduction of DDT. No improvement in shell thickness was detected between decades. Mean DDE residue levels in eggs showed a decline from 7.6 mg kg (1982-1986) to 4.5 mg kg (1991-1994), but there was no significant change in SigmaPCB residues. Moreover, the proportion of clutches with eggs exceeding critical SigmaPCB, DDE, and dieldrin residue levels (10%) did not change between decades. Relative to Greenland and Alaskan populations, F. p. tundrius at Rankin Inlet show high levels of organochlorine contamination and little reduction in residues over the last decade. These Tundra Peregrines continue to be exposed to organochlorines in Latin America; however, results also link relatively high levels in the study population with waterfowl species that do not leave Canada in winter.     

The uptake of particulates by an urban woodland: site description and particulate composition

Woodlands may improve local air quality by increasing the uptake rates of gaseous, particulate and aerosol pollutants from the atmosphere and can also act as relatively permanent sinks for some pollutants. Rough Wood, Walsall was selected for a study of the material which accumulates on tree foliage because of its location in a densely populated urban area, and its proximity to a motorway with high traffic flow (the M6) and to other pollutant sources. Methods were developed for leaf washing to allow determination of the quantity of dust and the identification of the dust particles present on oak leaves. Elemental analysis of particles was also undertaken using scanning electron microscopy coupled with electron probe microanalysis. A large proportion of particles were organic in origin. Of the inorganic particles, the majority contained silicon and aluminium in varying proportions suggesting that they were soil derived. Some particles were clearly identified as the products of combustion, and sea or road salt was present on leaf surfaces. Some particles contained copper, tin and titanium which may reflect the proximity of Rough Wood to local metal workings. The number of particles counted on leaf surfaces decreased as distance from the motorway increased.