Drying of granulated wood ash by flue gas from saw dust and natural gas combustion

At the district heating plant of Kalmar, Sweden an on-line unit for production of granulated wood ash for nutrient recycling on forest soils is being applied. Currently, the granules are dried by hot air from an oil-fired burner. The objective of this work was to investigate how drying by flue gas affects the hardening of granules, or impacts their chemical composition and properties. Ninety-six granule samples were treated by flue gas from natural gas combustion in a laboratory pilot scale flue gas generator. CO₂, CO, O₂, C₃H₈ and NO concentrations were varied during the experiment. Additionally, some samples were treated by flue gas from combustion of sawdust at the heating plant in Kalmar. Drying by flue gases did not affect the chemical composition of granules, but minor effects were seen in their mineralogy. The carbonate content was slightly higher in granules treated with flue gas from natural gas combustion compared to the granules dried by hot air only, when measured by wet chemical methods. Results from XRD analysis imply that the calcite content is higher and the portlandite and arcanite content slightly less in granules treated with flue gas from sawdust combustion compared to the granules dried by hot air only. The results from this investigation showed no negative effects on ash granule composition or physical structure by the use of a flue as a drying medium.     

Regional Variations in the Implementation of the Local Air Quality Management Process within Great Britain

The UK National Air Quality Strategy has required local authorities to review and assess air quality in their area of jurisdiction and determine locations in their areas where concentrations of specific air quality pollutants are predicted to exceed national air quality objectives in the future. Statutory air quality management areas (AQMAs) are designated where air quality is predicted to be above specified objective concentrations by specific target dates, and statutory air quality action plans will be necessary to improve the local air quality within these areas. Over 124 local authorities in England (including London), Wales and Scotland anticipate declaring AQMAs following the conclusion of the statutory air quality review and assessment process. However, other influences are being exerted on the local air quality management process and AQMA decision-making processes. Such influences include regional and sub- regional collaborative working between local authorities and government agencies and wider political decision-making processes. Some regions of Great Britain (encompassing England (including London), Scotland and Wales) anticipate many AQMA designations, whilst other regions are not anticipating any such designations despite apparently similar air quality circumstances. Evidence for regional or sub-regional variations in the locations of anticipated AQMAs are examined through an evaluation of the outcomes of the scientific review and assessment process undertaken by local authorities declaring AQMAs, and through a local authority survey to identify influences on decision-making processes at a level above that of the local authority. Regional variation is reported in the type of pollutant causing AQMAs to be declared, in the numbers of AQMAs in regions and in the spatial distribution of AQMAs across Great Britain.     

STREAM DISCHARGE PREDICTION VIA A GRID BASED SOIL WATER ROUTING WITH PADDY FIELDS1

ABSTRACT: A grid based daily hydrologic model for a watershed with paddy fields was developed to predict the stream discharge. ASCII formatted elevation, soil, and land use data supported by the GRASS Geographic Information System are used to generate distributed results such as surface runoff and subsurface flow, soil water content, and evapotranspiration. The model uses a single flow path algorithm and simulates a water balance at each grid element. A linear reservoir assumption was used to predict subsurface runoff components. The model was applied to a 75.6 km² watershed located in the middle of South Korea, and observed stream flow hydrographs from 1995 and 1996 were compared to model predictions. The stream flow predictions of 1995 and 1996 generally agreed with the observed flow, resulting in a Nash‐Sutcliffe efficiency R² of 0.60 and 0.62, respectively. The hydraulic conductivity for percolating water through the saturated layer affected baseflow generation. The levee height of the paddy influenced the time and magnitude of the surface runoff, depending on irrigation management. The model will be used for making low flow management decisions by evaluating the role of each land use to stream flow, especially in case of paddy decrease by gradual urbanization of a watershed.     

Integration of Environmental Assessment into the Regional Development Planning Process of the Galilee

/ The Galilee region on the northern edge of Israel constitutes more than 15% of the state's territory, supplies more than half of its drinking water needs, and is an important recreational resource and destination for Israelis. One of the main objectives of the plan for the Galilee was to devise a regional physical and economic development strategy for the years 1992-2007 that would arrest the trend of emigration of its residents, attract newly arrived immigrants to the region, and at the same time protect natural resources and environmental quality. This paper is limited to discussion of the environmental aspects of the plan. It analyzes spatial concepts for distribution of projected population growth, evaluates environmental impacts of alternative plans, and proposes a decision-making framework and tools for minimizing natural resources loss from development at the local level. Assessment of potential environmental impacts generated quantitative data of natural resources areas. Application of the data in the plan evaluation stage showed that the alternative that concentrated most of the new development in central Galilee was the second-best choice environmentally, but was preferred as the best choice for overall qualities. The planning study offers an alternative environmental impact assessment (EIA) process to the one presently used in Israel by incorporating environmental considerations at the initial plan-making stage and not at the plan-approval stage. It demonstrated that in order to be effective, environmental assessment and land-use planning should be seen as one effort that is integrated from the start and in each stage of the plan-making process.KEY WORDS: Environmental assessment; Development planning; Galilee     

Environmental reporting for global higher education institutions using the World Wide Web

Voluntary environmental reporting on the progress achieved against policy objectives is an emerging trend in industry and business and is recognized as a valuable aid in implementing policy and improving environmental management systems. Environmental reporting in the UK, has a whole range of formats including PERI, GEMI, WICE and EMAS, with the last, in particular, aiming to improve the level of environmental stewardship and to increase the flow of environmental information to audiences both internally and externally. Higher education institutions globally have been slow to respond in this respect and there is much that they can learn from corporate environmental reporting. An environmental policy is not sufficient proof of commitment for those institutions who have signed the global Talloires Declaration or the European COPERNICUS Charter: demonstrable progress in policy implementation is essential. The environmental management systems that higher education institutions adopt or create and the ways in which their environmental information is collated are of great significance, but the medium selected for the report is perhaps one of the most important aspects to consider. Those institutions such as the University of Sunderland, UK who are using the World Wide Web have been able to produce a flexible, hypertext-linked service on request with inbuilt feedback mechanisms containing varied, up-to-date, comprehensive and well-structured environmental information signposted to external pro-active institutions and agencies. These reports have unique educational angles and reveal links and networks that are naturally more pervasive and far-reaching in their scope and impact and could well provide a key way forward to practical and sustainable environmental reporting into the millennium.     

Strategic environmental product planning within Philips sound & vision

Until now no structured methodology existed for attuning environmental considerations to the business strategy of companies. The Environmental Competence Centre of Philips Sound & Vision in The Netherlands has developed and tested a methodology for this purpose. This methodology, called Selection of STRrategic Environmen Tal CHallenges (STRETCH), has proven to lead to promising results and should therefore be actively promoted. In this article, the authors show how the application of STRETCH provides the possibility of meeting three main objectives: First, focusing on the incorporation of environmental aspects into the company's business strategy can elicit innovations that may enhance the competitive position of the company by cost reduction and/or higher market shares. Second, the environmental opportunities and threats to be expected in the future can be anticipated in an earlier phase. Through this proactive approach a company can avoid external criticism and take the lead in environmental priority setting. Third, by applying the STRETCH methodology even higher eco-efficiencies are expected to be reached than through incremental, step-by-step environmental improvements.     

In-situ sparging: Mass transfer mechanisms

In-situ sparging has been accepted as a method to rapidly remediate groundwater at considerably lower costs compared to remedies based on groundwater recovery alone. The success of in-situ sparging depends on effective mass transfer between air and contaminated media in the subsurface. Factors affecting mass transfer include advective airflow, diffusive transport, interphase chemical partitioning, and chemical and biological reaction rates between sparged gases and subsurface contaminants, minerals, and naturally occurring organic compounds. Understanding these factors can increase the design efficiency of in-situ sparging and assist in developing sparging systems that use gases other than air (i.e., oxygen, ozone, and methane).