Preparation of gasification feedstock from leafy biomass

Dried leaves are a potential source of energy although these are not commonly used beside to satisfy daily energy demands in rural areas. This paper aims at preparing a leafy biomass feedstock in the form of briquettes which can be directly used for combustion or to extract the combustible gas using a gasifier. Teak (Tectona grandis) and rubber (Hevea brasiliensis) leaves are considered for the present study. A binder-assisted briquetting technique with tapioca starch as binder is adopted. Properties of these leafy biomass briquettes such as moisture content, calorific value, compressive strength, and shatter index are determined. From the study, briquettes with biomass-to-binder ratio of 3:5 are found to be stable. Higher mass percentage of binder is considered for preparation of briquettes due to the fact that leafy biomasses do not adhere well on densification with lower binder content. Ultimate analysis test is conducted to analyze the gasification potential of the briquettes. Results show that the leafy biomass prepared from teak and rubber leaves has calorific values of 17.5 and 17.8 MJ/kg, respectively, which are comparable with those of existing biomass feedstock made of sawdust, rice husk, and rice straw.     

Simultaneous removal of potent cyanotoxins from water using magnetophoretic nanoparticle of polypyrrole: adsorption kinetic and isotherm study

Cyanotoxins, microcystins and cylindrospermopsin, are potent toxins produced by cyanobacteria in potable water supplies. This study investigated the removal of cyanotoxins from aqueous media by magnetophoretic nanoparticle of polypyrrole adsorbent. The adsorption process was pH dependent with maximum adsorption occurring at pH 7 for microcystin-LA, LR, and YR and at pH 9 for microcystin-RR and cylindrospermopsin (CYN). Kinetic studies and adsorption isotherms reflected better fit for pseudo-second-order rate and Langmuir isotherm model, respectively. Thermodynamic calculations showed that the cyanotoxin adsorption process is endothermic and spontaneous in nature. The regenerated adsorbent can be successfully reused without appreciable loss of its original capacity.     

Evaluation of the efficacy of a portable LIBS system for detection of CWA on surfaces

Laser-induced breakdown spectroscopy (LIBS) is a laser-based optical technique particularly suited for in situ surface analysis. A portable LIBS instrument was tested to detect surface chemical contamination by chemical warfare agents (CWAs). Test of detection of surface contamination was carried out in a toxlab facility with four CWAs, sarin (GB), lewisite (L1), mustard gas (HD), and VX, which were deposited on different substrates, wood, concrete, military green paint, gloves, and ceramic. The CWAs were detected by means of the detection of atomic markers (As, P, F, Cl, and S). The LIBS instrument can give a direct response in terms of detection thanks to an integrated interface for non-expert users or so called end-users. We have evaluated the capability of automatic detection of the selected CWAs. The sensitivity of our portable LIBS instrument was confirmed for the detection of a CWA at surface concentrations above 15 μg/cm². The simultaneous detection of two markers may lead to a decrease of the number of false positive.     

Constructed wetlands may lower inorganic nutrient inputs but enhance DOC loadings into a drinking water reservoir in North Wales

Environmental Science and Pollution Research - The objective of this study was to monitor a newly constructed wetland (CW) in north Wales, UK, to assess whether it contributes to an improvement in...     

The ecology of the red fox (<Emphasis Type="Italic">Vulpes vulpes</Emphasis> L.) in the middle Lena River basin

The population of foxes in the central regions of Yakutia has grown by a factor of four to five during the period from 2000 to 2011–2012, following an increase in the abundance of voles from the genus Microtus. A total of 130 carcasses of foxes taken in 2007–2012 have been examined. Age- and sex-related variation in morphological features has been described. The demographic structure of the population has been studied by estimating animal age from annual layers in the recording structures. Changes in female fertility and involvement in reproduction depending on age and feeding conditions have been analyzed. Changes in the composition of fox diet caused by long-term population depression in the mountain hare and their effect on the dynamics of fox abundance have been revealed. Age- and sex-related characteristics of the condition factor in foxes and sex-related differences in their dietary preferences have been demonstrated.     

Spatial and temporal organization of benthic macroinvertebrate communities in Lake Chany,Western Siberia

Communities of benthic macroinvertebrates in drainless Lake Chany, the largest lake in Western Siberia, have been analyzed to estimate the effects of basic abiotic ecological factors (hydrophysical and hydrochemical parameters of water and the type of bottom ground) on their composition, structure, and dynamics. It has been shown that the level of development of these communities depends mainly on the water regime of the lake and also on the type of bottom ground, lake depth, and water mineral content.     

Characteristics of stone moroko population dynamics at different stages of naturalization in lake- and steam-type Dnieper reservoirs

The probable source of stone moroko, Pseudorasbora parva (Temminck & Schlegel, 1846), populations in lake- and stream-type Dnieper reservoirs was revealed. The dynamics and specific growth rates of these populations over 20 years were analyzed. The dynamic phase portrait method was used to determine the timing of stages in the process of invader naturalization and the periods when its populations were in equilibrium. The potential growth rates of P. parva populations in the Kremenchug and Dneprodzerzhinsk reservoirs were estimated.     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

The development of effects-based air quality management regimes

This paper considers the evolution of attempts to control and manage air pollution, principally but not exclusively focussing upon the challenge of managing air pollution in urban environments. The development and implementation of a range of air pollution control measures are considered. Initially the measures implemented primarily addressed point sources, a small number of fuel types and a limited number of pollutants. The adequacy of such a source-control approach is assessed within the context of a changing and challenging air pollution climate. An assessment of air quality management in the United Kingdom over a 50-year timeframe exemplifies the range of issues and challenges in contemporary air quality management. The need for new approaches is explored and the development and implementation of an effects-based, risk management system for air quality regulation is evaluated.