土地细碎化与农户环境友好型技术采纳决策——以测土配方施肥技术为例

利用湖北省1710份农户的微观数据,运用Double-hurdle模型,实证分析土地细碎化对农户环境友好型技术采纳决策的影响.研究表明:(1)总体来说,土地细碎化对农户是否采纳环境友好型技术,以及采纳密度(采纳环境友好型技术的面积/总农地经营面积)均产生负向影响;(2)对男性和低自我效能感知主体而言,土地细碎化对其是否采纳环境友好型技术决策和采纳密度决策均产生负向影响;而对女性和高自我效能感知主体,则未产生显著影响;(3)土地细碎化对强社会网络主体的是否采纳决策产生影响,对其采纳密度决策不产生影响,土地细碎化对弱社会网络主体的是否采纳和采纳密度决策均产生负向影响;(4)土地细碎化对低农业收入依赖主体的采纳密度决策以及高农业收入依赖主体的是否采纳决策产生负向影响,对低农业收入依赖主体的是否采纳决策以及高农业收入依赖主体的采纳密度决策不产生影响;(5)土地细碎化对平原地区农户的是否采纳决策不产生影响,对其采纳密度决策产生影响,土地细碎化对非平原地区农户的是否采纳和采纳密度决策均产生负向影响.据此,建议着力推进高水平良田建设,激励农户环境友好型技术采纳决策的政策制定需要充分考虑农户异质性影响,实施精准施肥政策,并充分考虑不同自然环境特征(如地形等)的影响,针对平原和非平原地区的农户,采取差异化的激励策略.     

大型碳化硅生产园区面源源强及减排指标核算

以某年产25万吨大型碳化硅园区无组织排放面源为例,提出基于多个地面站气象数据的CALPUFF模型地面浓度反推方法,优化流场模拟,使得无组织面源源强核算结果更加准确,并以环境保护目标空气质量达标为原则,核算其大气污染物减排指标,得出具体结论:园区大气污染物SO2、NOX、CO、PM10年排放量分别为449.06t、86.98t、5158.58t、115.06t;无组织排放SO2、CO及PM10的减排比例分别为63.5%、19.2%、42.44%,对应减排量分别为285.16 t/a、990.45 t/a、48.83 t/a。     

不同类型活性炭处理废水中重金属离子的研究进展

重金属对人体的显著毒性和难降解的特性,使重金属水体污染成为全球性关注的环境问题。本文综述了重金属废水的危害、来源及常用处理方法,比较了不同类型活性炭处理废水中重金属离子的差异,阐述了不同类型活性炭处理技术的优势和特点,并对今后的重金属废水处理技术研究方向进行了展望。     

环境检测中地表水检测现状及进展

地表水作为维持人类正常生产生活的重要资源,应作为环境监测的首要任务常抓不懈。现今对地表水的检测工作中仍存在较多不完善之处,应从环境保护的大局出发,应用合理的检测技术,将地表水检测工作提升到新的高度。本文分析了环境检测中地表水的检测现状,并提出了相应的解决措施。     

煤矿采空塌陷对地下水的影响

在煤炭开采过程中,煤炭被采出后其所在地下煤层会形成一定区域的采空区,并使煤层上方的顶板岩层失去支撑,由于顶板岩层的抗拉强度比较有限,因此在其顶板岩层自身重力与上覆岩层压力的影响下,很容易因顶板断裂、破碎而出现采空塌陷问题,这不仅会影响煤矿所在区域的生态安全,同时还会使地下水受到较大的负面影响。为此,本文结合煤矿采空塌陷的特点,围绕采空塌陷对地下水的影响展开了分析,并在此基础上提出了一些较为可行的采空塌陷区域地下水治理保护建议。     

UiO-66(Zr)@多孔陶瓷复合材料的制备及对络合态重金属EDTA-Cu(Ⅱ)的去除

本文采用多孔陶瓷作为基体制备了锆基金属有机骨架UiO-66@多孔陶瓷复合材料.通过扫描电子显微镜(SEM)、粉末X射线衍射(PXRD)、氮气吸附和傅里叶变换红外光谱(FTIR)等表征手段对比了氢氧化钠脱硅和乙二胺表面改性等基体活化方式对UiO-66(Zr)在多孔陶瓷表面负载情况的影响.结果表明,经过乙二胺表面改性的多孔陶瓷对UiO-66(Zr)的负载更均匀,负载效果更好.以EDTA-Cu(Ⅱ)为考察对象,研究了UiO-66(Zr)@乙二胺表面改性多孔陶瓷复合材料对络合态重金属的净化效能.结果表明,UiO-66(Zr)@多孔陶瓷复合材料在较宽的酸碱条件下(pH=3—9)对络合态重金属EDTA-Cu(Ⅱ)均表现出良好的吸附性能,饱和吸附量为1.17 mg·g~(-1),并可通过NaOH解吸再生,从而实现材料的重复利用.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Transformation of hazardous lead into aluminosilicate ceramics: structure evolution and lead leaching

This study investigated crystallization mechanisms for the formation of lead aluminosilicate by sintering lead stabilization with kaolin-based precursors. PbAl2Si2O8 was found to be the only stable lead aluminosilicate in low-PbO system and demonstrates its highly intrinsic resistance to acid attack in leaching test. A three-stage PbAl2Si2O8 formation mechanism was supported by the results of the changing temperature in the system. Amorphization of sintered products was observed in both PbO/kaolinite and PbO/mullite systems at 600–700°C. When the temperature was increased to 750–900°C, the crystallochemical formation of lead aluminosilicates (i.e., Pb4Al4Si3O16, Pb6Al6Si2O21, and PbAl2Si2O8) was observed. Pb4Al4Si3O16 and Pb6Al6Si2O21 were found to be the intermediate phases at 700–900°C. Finally, PbAl2Si2O8 was found to be the only crystallite phase to host Pb at above 950°C. A maximum of 80% and 96.7% Pb can be incorporated into PbAl2Si2O8 in PbO/kaolinite and PbO/mullite systems, respectively, but the final products exhibited different microstructures. To reduce environmental hazard of lead, this strategy demonstrated a preferred mechanism of immobilizing lead into PbAl2Si2O8 structure via kaolin-based precursors.     

Molecular,functional, and cellular alterations of oocytes and cumulus cells induced by heat stress and shock in animals

Environmental Science and Pollution Research - Global warming is considered as the main environmental stress affecting ecosystems as well as physiological and biochemical characteristics, and...     

基于暂态零序电流法的站内电缆监测系统及验证试验

及时发现变电站内电力电缆的故障对保证变电站安全稳定运行具有重要意义。介绍了1种基于暂态零序电流法的站内电缆监测系统,对系统的监测原理和各部件参数要求进行了论述,并采用单相失压模拟试验和人工单相接地试验对电缆线路监测系统进行了验证。试验结果表明,该系统可以准确地采集电缆线路故障发生时的暂态零序电流,并能及时将故障报警信息上报运维人员,保证变电站安全稳定运行。