Performance assessment of a wastewater treatment plant producing effluent for irrigation in Egypt

A conventional activated sludge treatment facility was the subject of this study. The assessment was directed at determining the characteristics of the raw wastewater, the quality of the treated effluent and the efficiency of the various treatment units. Furthermore, the water quality along the effluent irrigation canal was monitored. The assessment of the quality of the treated effluent for irrigation is based on the guidelines established by the World Health Organization and the Egyptian decree 9/89 for the use of wastewater in agriculture. The results of the study indicated that the concentration of the raw wastewater was considered moderate. The mean values of the COD (Chemical Oxygen Demand), BOD (Biological Oxygen Demand) and total suspended solids (TSS) were around 250, 102 and 142 mg l–1, respectively. This was attributed to the high quantities of wastewater from industrial sources. The overall efficiency of the treatment facility was good. The mean residual COD, BOD and TSS were 25, 8 and 21 mg l–1 and the corresponding percentage removal values were 90, 92 and 85%, respectively. The maximum percentage removal of oil and grease was 84% with a mean residual concentration of 24 mg l–1. The total viable count (22°C and 37°C), faecal coliform and aecal streptococci were reduced by 99.9% compared to only 99.5% for Salmonella. Bacteriological examination of the dried sludge indicated a reduction of nine logs of faecal coliform and faecal streptococci, as compared to thickened sludge. Analysis of the Ni, Cu, Pb and Cr in the dried sludge indicated that their concentrations are within the permissible limits. Zinc exceeded the consent standards by 50%. The results of the analyses of samples collected at the beginning of the irrigation canal indicated insignificant changes from the characteristics of the final effluent. Samples collected at a distance of 2km along the irrigation canal showed mean reductions in the COD and BOD of 28.6 and 47%, respectively, which could be attributed to sedimentation and/or a self-purification effect. An increase in the total nitrogen, total phosphorus and total viable count was also recorded, which could be due to seepage from the agricultural land. From the data available it is evident that the treated wastewater could be used for restricted irrigation. The design and implementation of a monitoring programme is recommended.     

Electrochemical treatment of aqueous wastes containing pyrogallol by BDD-anodic oxidation

In this work, the electrochemical oxidation of pyrogallol (1,2,3-trihydroxybenzene) on boron-doped diamond anodes has been studied. The voltammetric results showed that pyrogallol oxidation takes place in the same potential region as that of phenol where the supporting electrolyte is stable. Synthetic wastewaters containing pyrogallol have been treated in a bench-scale electrolysis plant. This plant operates in a discontinuous mode by recirculating the waste continuously through a single-chamber electrochemical flow cell. The complete mineralization of pyrogallol and the electro-generated pollutants is obtained in the electrolytic device. HPLC analyses show the formation of carboxylic acids as the main intermediates. The efficiency of the electrochemical process was found to depend mainly on the pollutant concentration present in the waste and on the applied current density. The high efficiency of this technology can be explained in terms of the direct electro-oxidation at the BDD surface and the oxidation carried out by hydroxyl radicals and other electro-generated oxidants.     

The potential effect of temperature-humidity index on productive and reproductive performance of buffaloes with different genotypes under hot conditions

The current study was aimed to investigate the impact of THI on productive and reproductive indices of PE and F₁ crosses (50% PE and 50% Italian buffaloes) and back crosses (BC) (75% PE and 25% Italian buffaloes) under hot conditions. In this study, 8385 records used PE (1914, 1518, and 1737), F₁ (387, 447, and 657), and BC (495, 585, and 645) for low, medium, and high THI, respectively. The high THI reduced the conception rate after first insemination in PE, F₁, and BC ((odds ratio, OR) = 1.187, P = 0.007; 2.361, <0.0001 and 1.603, <0.0001, respectively) when compared with low THI. But, stillbirth and calving condition were not significantly influenced by different THI levels in BC and F₁. BC was more bearable to the harsh environment; they possessed the highest incidence of conception after first insemination (72.70, 72.60, and 62.40%), producing live calves (98.50, 100, and 99.40%) with easy calving condition (98.50, 100, and 99.40%) when compared to PE and F₁ at different levels of THI, respectively. The average daily milk yield and peak of milk production were decreased in PE (4.02 and 5.12%), BC (13.33 and 10.95%), and F₁ (25.29 and 12.20%) from low to high THI. However, BC revealed no significant changes in days open, dry period, calving interval, gestation length, service per conception, and the first service post-partum at different levels of THI when compared with PE and F₁. Therefore, rearing BC is recommended for improving buffalo productive and reproductive performance under hot conditions.     

Effectiveness of wastewater management in rural areas of developing countries: a case of Al-Chouf Caza in Lebanon

Ghaggar, one of the major rivers of northern India originating in outer Himalayas and flowing through the state of Punjab, Haryana, and Rajasthan, is put to multiple uses. Along its course of 464 km, it receives discharge from various cities and runoff from agricultural lands. Punjab and Haryana are two predominantly agricultural states of India using substantial amounts of agrochemicals, yet there are no reports available in literature on the level of pesticides in the stretch of river Ghaggar through Punjab and Haryana. This is the first report on pesticide pollution of the river Ghaggar in Haryana. Water samples along the 230-km stretch of the river in Haryana were analyzed for the presence of organochlorine insecticide residues. While aldrin and dieldrin were below detection limits, both hexachlorocyclohexane (HCH) and dichlorodiphenyltrichloroethane (DDT) were traceable in all the water samples. High concentration of β-HCH among ΣHCH indicates old pollution source whereas predominance of p,p^′ -DDT among ΣDDT reflects its recent use in the catchment area of the river. The concentrations of HCH and DDT in all the samples were above the permissible limits prescribed by the European Commission Directive for drinking purposes.     

Decentralized approaches to wastewater treatment and management: applicability in developing countries

Providing reliable and affordable wastewater treatment in rural areas is a challenge in many parts of the world, particularly in developing countries. The problems and limitations of the centralized approaches for wastewater treatment are progressively surfacing. Centralized wastewater collection and treatment systems are costly to build and operate, especially in areas with low population densities and dispersed households. Developing countries lack both the funding to construct centralized facilities and the technical expertise to manage and operate them. Alternatively, the decentralized approach for wastewater treatment which employs a combination of onsite and/or cluster systems is gaining more attention. Such an approach allows for flexibility in management, and simple as well as complex technologies are available. The decentralized system is not only a long-term solution for small communities but is more reliable and cost effective. This paper presents a review of the various decentralized approaches to wastewater treatment and management. A discussion as to their applicability in developing countries, primarily in rural areas, and challenges faced is emphasized all through the paper. While there are many impediments and challenges towards wastewater management in developing countries, these can be overcome by suitable planning and policy implementation. Understanding the receiving environment is crucial for technology selection and should be accomplished by conducting a comprehensive site evaluation process. Centralized management of the decentralized wastewater treatment systems is essential to ensure they are inspected and maintained regularly. Management strategies should be site specific accounting for social, cultural, environmental and economic conditions in the target area.     

Detection of hazardous pollutants in chrome-tanned leather using locally developed laser-induced breakdown spectrometer

K?z?l?rmak River has been used as Ankara??s drinking water source for approximately 1.5?years. Therefore, this region??s water, sediment, and fish samples are measured for detecting the heavy metals. This is important for the current situation as well as the future in terms of potential impact. The amount of heavy metals in drinking water should be within the limited values; otherwise, the accumulation of heavy metals will cause many problems to living organisms. Especially high levels of arsenic, cadmium, nickel, mercury, etc. are very dangerous to freshwater ecosystems as for human if the water is being use as drinking water. In this study, water, sediment samples, muscle, and gills of three fish species (Capoeta tinca, Capoeta capoeta, Leuciscus cephalus) were analyzed for the presence of heavy metals such as (Al, Fe, As, Cd, Ni, Mn, Se, Si) to determine present accumulation levels and possible toxic effect. The accumulation pattern of heavy metals in the water, sediment, and fish tissue follows the sequence: Si > Fe > Al > Mn > As > Ni > Se > Cd, Fe > Al > Mn > Ni > As > Se > Cd, and Fe > Al > Mn > As > Ni > Si > Cd. In addition, the detected concentrations of heavy metals in the K?z?l?rmak and Delice Rivers are compared with other heavy metal studies in the other main rivers and lakes in Turkey.     

Antitumor effect of copper nanoparticles on human breast and colon malignancies

Environmental Science and Pollution Research - Breast and colon carcinomas are two types of common cancers which lead to cancer-related deaths. Due to their cytotoxic potential against cancer...     

The contribution of mediated oxidation mechanisms in the electrolytic degradation of cyanuric acid using diamond anodes

In this work, the contribution of mediated oxidation mechanisms in the electrolytic degradation of cyanuric acid using boron-doped diamond(BDD) anodes was investigated in different electrolytes. A complete mineralization of cyanuric acid was obtained in Na Cl;however lower degrees of mineralization of 70% and 40% were obtained in Na2SO4 and Na Cl O4, respectively. This can be explained by the nature of the oxidants electrogenerated in each electrolyte. It is clear that the contribution of active chlorine(Cl2, HCl O, Cl O-)electrogenerated from oxidation of chlorides on BDD is much more important in the electrolytic degradation of cyanuric acid than the persulfate and hydroxyl radicals produced by electro-oxidation of sulfate and water on BDD anodes. This could be explained by the high affinity of active chlorine towards nitrogen compounds. No organic intermediates were detected during the electrolytic degradation of cyanuric acid in any the electrolytes, which can be explained by their immediate depletion by hydroxyl radicals produced on the BDD surface. Nitrates and ammonium were the final products of electrolytic degradation of cyanuric acid on BDD anodes in all electrolytes. In addition, small amounts of chloramines were formed in the chloride medium. Low current density(≤ 10 m A/cm2) and neutral medium(p H in the range 6–9) should be used for high efficiency electrolytic degradation and negligible formation of hazardous chlorate and perchlorate.     

Heavy metals availability (Fe, Mn, Zn, Cu and Cr) in Aden Gulf sediments under aerobic and anaerobic conditions

The present study aims to analyse the chemical speciation of heavy metals in relation to aerobic and anaerobic conditions. Two sediment samples (from the Gulf of Aden, Yemen) were incubated under flooded conditions. In particular, the chemical forms of Fe, Mn, Zn, Cu and Cr under the experimental conditions were studied using a sequential chemical extraction method. The pH and Eh of the suspension were measured as critical parameters controlling the fate of the metals in the environment. The results showed that the metals concentration in the different forms varied with time incubation and affected by the variation of redox potential and pH value. Also, the changes in both redox potential (Eh) and pH values had evident effects on heavy metals transformation. It is obvious that the highest redox potential affected the amount of iron and manganese in the oxides form. When the redox potential decreased to-133 and-170 mV, it caused a significant transformation of the Fe-Mn oxide form to the water-soluble and exchangeable fractions. Under anaerobic conditions, the relative percentage of all five metals including the summation of four fractions (the water-soluble and exchangeable, carbonate, oxides and organic fractions) constituted 45-60% of the total amount of iron, 33-50% for manganese, 33-63% for Zn, 63-74% for Cu and 19-43% for Cr. Both zinc and copper among water-soluble and exchangeable fraction were high at the end of incubation period, this accompanied by a significant decrease in the content of the organically bound fraction. In general, the reducing conditions were more favorable for metal bound to water soluble and exchangeable fraction.