Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

土壤重金属污染的灰色模糊评价

以灰色聚类为基础，提出了灰色模糊聚类分析法，并将其应用于土壤环境质量评价中，经实例分析表明，这是一种较为简便，合理、有效的评价方法。     

噪声监测中存在问题的探讨

阐述了噪声监测中存在的问题，对监测点位的科学设置、测量时间和监测仪器的合理安排、如何正确地把握评估标准等作了探讨。     

梯度淋洗快速分析水中多环芳香烃

根据流动相极性理论，采用梯度淋洗一检测器编程方法检测多环芳烃，大大缩短了分析时间，并提高了灵敏度和精密度．为进一步定量分析提供了优良的途径。     

哈尔滨市生活垃圾处理产业化探讨

随着我国经济发展和人民生活水平的不断提高,城市垃圾产生量也不断增加,垃圾处理越来越受到人们的重视,垃圾处理产业也逐渐兴起.由于地区差异,工业发达程度和生活水平不同,不同的国家和地区有着不同的垃圾组成,相应的也采取不同的垃圾处理方法.哈尔滨市的生活垃圾处理现状具有一定的典型性,文章结合哈尔滨市实际情况,主要论述哈尔滨市生活垃圾的产量、特性及目前的处理状况,分析哈尔滨市生活垃圾问题的实质,对垃圾处理产业化存在的问题及其对策进行探讨,以期更好地促进生活垃圾处理步入产业化的发展轨道.     

用S型皮托管测固定污染源排气参数的方法探讨

针对固定污染源排气监测实际工作用S型皮托管测定静压方法有争议的问题进行了理论分析和低速风洞试验。结果表明,用S型皮托管测固定污染源排气静压的平行法和垂直法二方法都在不影响排气量和污染物排放量测定结果的范围内;用全压与平行法静压差作为动压来计算流速可影响较大。     

高浓度印染废水处理工程工艺条件与实例分析

研究以三相生物流化床作为工程化反应器处理印染废水的工程工艺条件及操作特性，分别测定流化床内的气相含率，兴体循环速度及体积氧传质系数。     

大顶子山航电枢纽工程建库后上游水质总量控制研究

松花江大顶子山枢纽工程建设后,库区内水体流线及扩散规律的变化将影响库区内水质,受沿江排污影响,其规划目标的水环境容量将发生改变,因此对建库后上游水质总量控制进行研究很有意义.     

煤中有害元素对环境和人体健康影响的评价参数

煤中有害元素对环境和人体健康影响的较为全面的评价体系一直未建立，环保部门也缺乏系统性评价参数对电厂等在煤煤过程中有害元素排向大气的释放量进行监测估算。本文在查阅大量资料（主要为外文）的基础上，认为评价煤中有害元素对环境和人体健康影响的参数应该包括以下方面的数据C、H、O、N、无机硫，有机硫，有害微量元素的含量，分布规律，赋存状态，迁移转化行为（在燃煤过程中），洁净能力，淋滤力，矿物质，有机化学特征，煤炭学特征，并对煤中有害元素的污染方法进行探讨，如果上述各参数的数据被全面提供，并据此数据作针对性的抑制措施，煤中有害元素对环境和人体健康危害影响必将降低到最小。     

浅谈水泥生产中回转窑窑尾SO_2监测

窑尾监测SO_2时,有时会出现其浓度低于仪器最低检出限的情况,应根据窖尾类型、煤中硫含量大小,有无脱硫工艺等情况,认真对比、计算分析,以保证监测数据真实可靠。