吊水壶尾矿坝渗流特性三维有限元分析

本文结合工程实例,以吊水壶尾矿坝为背景,建立现状尾矿坝三维模型,利用三维有限元法反演分析现状尾矿坝的渗流场,将计算结果与勘察的浸润面对比分析,验证模型的可靠性和合理性。基于此模型建立加高后的尾矿坝三维模型,计算正常蓄水位和设计洪水位两种工况下的渗流场,分析坝体浸润面埋深、滩长、渗流坡降等,结果表明,不设排渗措施时,尾矿坝干滩长度、浸润面埋深均能满足规范要求,而且尖流性态良好,满足渗透稳定。提出该尾矿坎可通过加高工程来进行渗流控制的建议。     

HAZOP分析方法在石油工业上游业务中的应用

基于国内石油工业上游业务风险分析和安全评价现状,针对油气勘探、油气田开发、油气集输和海洋石油各阶段工艺流程与作业环境特性,选择引导词、偏差进行安全评价,分析和探讨HAZOP分析方法在上游业务中应用的可行性和适用性。研究表明,对于油气田开发、油气集输阶段以及海上油气田生产方面,应用HAZOP分析,可从本质安全角度提出项目风险管理控制措施,提高装置安全性和可操作性,促进企业持续稳定发展。但对于油气勘探阶段,由于其风险呈层次型且评价方法依赖于数学建模和数值计算,不适宜采用HAZOP分析方法。     

一种异形结构传爆药起爆威力实验研究

旨在研究一种新型高能传爆药装药结构,根据冲击波汇聚技术、拐角效应理论和有效装药理论等,设计了一种异形结构传爆药。利用主装药轴向钢凹法对多点同步起爆网络起爆的该异形结构传爆药柱起爆威力进行了实验研究。对实验数据进行对比分析,结果表明在达到相同起爆效果的情况下,利用多点同步起爆网络起爆的该异形结构传爆药柱相对于普通圆柱形传爆药柱的用药量有较大幅度的降低。研究成果对解决钝感弹药的起爆问题具有重大的现实意义。     

1982-2003年中国草地生物量时空格局变化研究

论文结合草地生物量调查资料、对应时段NDVI数据,分析了1982-2003年不同时期我国草地生物量空间格局变化特征及其与气候变化的关系。结果表明：20世纪80年代初期到末期,全国大部分地区草地生物量增加或基本持平;80年代末期到90年代初,大面积范围内草地生物量降低,热性草丛、温性草甸草原、山地草甸、低地草甸下降幅度分别为10.86%、4.96%、4.86%、3.49%;90年代末期后,北方大部分地区草地生物量上升到80年代的水平,南方草地生物量略有上升;1982-2003年草原区平均气温上升0.6~1.5℃,降雨量减少23.3%,草地生物量变化与降水量变化有弱相关关系（相关系数0.29）,与气温变化无关。     

絮凝剂用壳聚糖的中试生产研究

在实验室制备絮凝剂用壳聚糖的基础上,按工业化生产的要求对壳聚糖进行了中试生产研究.经正交试验确定了生产过程中脱钙、脱蛋白、脱乙酰等3步反应的最佳工艺参数. 由此中试工艺生产的壳聚糖的生产成本比国内同类产品下降了22%,生产周期缩短了66%,且主要性能指标均达到或超过国内外同类产品的水平.     

生态系统健康与环境管理

环境管理和生态系统健康是密不可分的,生态系统健康是环境管理的目的,生态系统健康为环境管理提供了新的思路、新的方法,健康的生态系统为实现区域可持续发展提供技术支撑和发展基础.生态系统健康的发展演替过程是优化环境管理的步骤.优化的环境管理为生态系统健康发展提供宏观决策和社会经济保障.本文从学科发展的角度论述了生态系统健康产生的背景、理论基础和应用途径;从学科交叉的角度论述了生态系统健康的评价和与环境管理的关系.提出了环境管理的目标:健康的生态系统→健康的环境→健康的食品→健康的人类生态系统→健康的社会发展.     

Recovery of Ni(II) from real electroplating wastewater using fixed-bed resin adsorption and subsequent electrodeposition

Resin adsorption and subsequent electrodeposition were used for nickel recovery. Treated wastewater can meet the Electroplating Pollutant Discharge Standard. The spent resin is completely regenerated by 3 BV of 4% HCl solution. 95.6% of nickel in concentrated eluent was recovered by electrodeposition. Effective recovery of high-value heavy metals from electroplating wastewater is of great significance, but recovering nickel ions from real electroplating wastewater as nickel sheet has not been reported. In this study, the pilot-scale fixed-bed resin adsorption was conducted to recover Ni(II) ions from real nickel plating wastewater, and then the concentrated Ni(II) ions in the regenerated solution were reduced to nickel sheet via electrodeposition. A commercial cation-exchange resin was selected and the optimal resin adsorption and regeneration conditions were investigated. The resin exhibited an adsorption capacity of 63 mg/g for Ni(II) ions, and the average amount of treated water was 84.6 bed volumes (BV) in the pilot-scale experiments. After the adsorption by two ion-exchange resin columns in series and one chelating resin column, the concentrations of Ni(II) in the treated wastewater were below 0.1 mg/L. After the regeneration of the spent resin using 3 BV of 4% (w/w) HCl solution, 1.5 BV of concentrated neutral nickel solution (>30 g/L) was obtained and used in the subsequent electrodeposition process. Using the aeration method, alkali and water required in resin activation process were greatly reduced to 2 BV and 3 BV, respectively. Under the optimal electrodeposition conditions, 95.6% of Ni(II) in desorption eluent could be recovered as the elemental nickel on the cathode. The total treatment cost for the resin adsorption and regeneration as well as the electrodeposition was calculated.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

CQDs/g-C3N4的制备及其光催化降解四环素性能

以三聚氰胺为原料,通过煅烧制得石墨相氮化碳(g-C3N4),以柠檬酸和尿素作为碳量子点(CQDs)的碳源,采用水热法制备出CQDs/g-C3N4复合光催化材料.通过FESEM、FETEM、XRD、XPS、UV-vis对材料的形貌结构进行了表征,研究了其在可见光下降解盐酸四环素性能和机制.结果表明,CQDs的负载增强了材...     

冷空气在北上台风“利奇马”致灾暴雨中的作用分析

利用NCEP逐6 h再分析资料、地面加密观测、探空、雷达资料,分析得出“利奇马”致灾暴雨是在长时间稳定维持的天气尺度环流背景下形成的。冷空气在降水所起的作用表现在:(1)长时间维持的弱冷空气与偏南暖湿气流交汇形成了边界层辐合线,辐射升温和暖湿气流的输送加大了辐合线两侧的温度和露点梯度,在高温高湿的有利环境下,对流在辐合线附近强烈发展。(2)高空槽后冷空气由“利奇马”环流西北侧渗入,先后形成3个冷平流中心,分别对应3个阶段的降水。(3)冷暖空气在降水区的持续辐合抬升作用增强了降水,最强降水时段发生在锋区垂直方向坡度最大的时段。(4)水平锋生有利于水汽输送和辐合抬升,垂直锋生有利于对流不稳定能量的累积和触发。冷空气形成的水平辐合和抬升造成大范围上升运动,使得锋生和垂直锋消同时存在,最强降水时段发生在水平锋生最强的时段。