Phragmites australis as a heavy metal bioindicator in the Anzali wetland of Iran

In this study, levels of Fe, Cu, Cd, and Ni in the sediments and organs of Phragmites australis from three different sites in the Anzali wetland were measured. Heavy metal accumulation was higher in the roots of P. australis than in the shoots and leaves. There was a significant correlation between metal concentrations in roots and sediment. This result showed that the root of P. australis can be used as bioindicator for Fe, Cu, Cd, and Ni. Metal levels in sediment were recorded higher than the interim sediment quality guideline values, and the Cd and Ni content in P. australis were higher than the unpolluted levels in plants. This indicates the necessity for continuous monitoring of the metal levels and also evaluating the hazard risk of heavy metals in aquatic organisms in the Anzali wetland.     

Biosorption characteristics of unicellular green alga Chlorella sorokiniana immobilized in loofa sponge for removal of Cr(Ⅲ)

Loofa sponge (LS) immobilized biomass of Chlorella sorokiniana (LSIBCS), isolated from industrial wastewater, was investigated as a new biosorbent for the removal of Cr(Ⅲ) from aqueous solution. A comparison of the biosorption of Cr(Ⅲ) by LSIBCS and free biomass of C. sorokiniana (FBCS) from 10-300 mg Cr(Ⅲ)/L aqueous solutions showed an increase in uptake of 17.79% when the microalgal biomass was immobilized onto loofa sponge. Maximum biosorption capacity for LSIBCS and FBCS was found to be 69.26 and 58.80 mg Cr(Ⅲ)/g biosorbent, respectively, whereas the amount of Cr(Ⅲ) ions adsorbed onto naked LS was 4.97 mg/g. The kinetics of Cr(Ⅲ) biosorption was extremely rapid and equilibrium was established in about 15 and 20 min by LSIBCS and FBCS,respectively. The biosorption equilibrium was well defined by Langmuir adsorption isotherm model. The biosorption kinetics followed the pseudo-second order kinetic model. The biosorption was found to be pH dependent and the maximum sorption occurred at the solution pH 4.0. Desorption studies showed that 98% of the adsorbed Cr(Ⅲ) could be desorbed with 0.1 mol/L HNO3, while other desorbing agents were less effective in the order: EDTA ＞ H2SO4 ＞ CH3COOH ＞ HCl. The regenerated LSIBCS retained 92.68% of the initial Cr(Ⅲ) binding capacity up to five cycles of reuse in continuous flow-fixed bed columns. The study revealed that LSIBCS could be used as an effective biosorbent for the removal of Cr(Ⅲ) from wastewater.     

Spatial and temporal analysis of ground level ozone and nitrogen dioxide concentration across the twin cities of Pakistan

The analyses presented in this paper include the concentration levels of NO₂ and O₃ measured during 2 successive years in twin cities (Rawalpindi and Islamabad) of Pakistan from November 2009 to March 2011. NO₂ was determined using the passive sampling method, while ozone was determined by Model 400E ozone analyzer. The average NO₂ and O₃ concentration in twin cities of Pakistan was found to be 44?±?6 and 18.2?±?1.24 ppb, respectively. Results indicate that the concentration of NO₂ and O₃ show seasonal variations. Results also depict that NO₂ and O₃ concentration levels are high in areas of intense traffic flow and congestion. Rawalpindi has more elevated levels of NO₂ and O₃ as compared to the Islamabad due to the narrow roads, enclosing architecture of road network and congestion. Climatic variables also influenced the NO₂ and O₃ concentration, i.e., temperature is positively related with O₃, while negatively related with NO₂, relative humidity is directly related with NO₂ and inversely related with O₃, whereas rainfall show negative association with both NO₂ and O₃ concentration. Comparing the results with WHO standards reveals that NO₂ concentration levels at all the sampling points are above the permissible limit, while ozone concentration is still lower than the WHO standards. Thus, there is a need to take appropriate steps to control these continuously increasing levels of NO₂ and O₃ before they become a serious hazard for the environment and people living in those areas.     

Vegetable Oil Based Polyurethane Containing 1,2,3-Triazolium Functional Groups as Antimicrobial Wound Dressing

Preparation of antimicrobial polyurethane wound dressing membranes from a mixture of castor oil and a novel soybean oil-based polyol containing 1,2,3-triazolium rings (QTSBO) was described in this research. QTSBO was prepared through N-alkylation of 1,2,3-triazole functional soybean oil (TSBO) with methyl iodide, and TSBO was synthesized from an azidated soybean oil and propargyl alcohol through click reaction. The excellent tensile strength of these dressings under dry state and minimum deterioration of this property at fully hydrated state guaranteed the mechanical protection of wounds during the entire period of the healing process. The measured quantities of equilibrium water absorption and water vapor transmission rate for the optimized dressings confirmed the applicability of the selected formulations for the preservation of proper moist environment over low exuding wounds. The cyto-compatibility of dressings was verified by the excellent ability of the dressings to support the growth and proliferation of dermal fibroblasts. Due to the presence of 1,2,3-triazolium rings the dressing showed efficient antimicrobial activity against different bacterial and fungal stains. Therefore, these dressing could promote wound healing by preserving moist and hygienic environment over the wound bed.     

Climatology of atmospheric circulation patterns of Arabian dust in western Iran

Being in vicinity of vast deserts, the west and southwest of Iran are characterized by high levels of dust events, which have adverse consequences on human health, ecosystems, and environment. Using ground based dataset of dust events in western Iran and NCEP/NCAR reanalysis data, the atmospheric circulation patterns of dust events in the Arabian region and west of Iran are identified. The atmospheric circulation patterns which lead to dust events in the Arabian region and western Iran were classified into two main categories: the Shamal dust events that occurs in warm period of year and the frontal dust events as cold period pattern. In frontal dust events, the western trough or blocking pattern at mid-level leads to frontogenesis, instability, and air uplift at lower levels of troposphere in the southwest of Asia. Non-frontal is other pattern of dust event in the cold period and dust generation are due to the regional circulation systems at the lower level of troposphere. In Shamal wind pattern, the Saudi Arabian anticyclone, Turkmenistan anticyclone, and Zagros thermal low play the key roles in formation of this pattern. Summer and transitional patterns are two sub-categories of summer Shamal wind pattern. In summer trough pattern, the mid-tropospheric trough leads to intensify the surface thermal systems in the Middle East and causes instability and rising of wind speed in the region. In synthetic pattern of Shamal wind and summer trough, dust is created by the impact of a trough in mid-levels of troposphere as well as existing the mentioned regional systems which are contributed in formation of summer Shamal wind pattern.     

Screening of human health risk to infants associated with the polychlorinated biphenyl (PCB) levels in human milk from Punjab Province,Pakistan

This study assessed the polychlorinated biphenyl (PCB) levels in human milk and its associated health risk to infants from rural and urban settings of five districts of Punjab Province, Pakistan. The ∑₃₄PCB concentrations ranged from 30.9 to 68.3 ng g^?1 on lipid weight (l.w.) basis. The ∑₈DL-PCB concentrations were ranged from 0.29 to 1.35 ng g^?1 l.w., (mean 6.2 ± 8.7 ng g^?1 l.w.), with toxicity equivalent to polychlorinated dibenzodioxins (PCDDs) ranging from 8.58 × 10^?6 to 0.05 ng TEQ g^?1 l.w. The spatial trend of PCB levels in human milk revealed higher bioaccumulative levels for urban mothers as compared with rural counterparts. The estimated daily intake (EDI) values of DL-PCBs to infants through trans-mammary transfer were considerably higher than tolerable daily intake limits established by WHO (i.e., 1–4 pg TEQ kg^?1 bw) and other globally recognized organizations. Similarly, the hazard quotient values for TEQ ∑₈DL-PCBs (range 1.21 to 79.87) were far above the benchmark value of 1 at all the sampling sites, indicating the high levels of adverse health risks to infants in the region through breast milk consumption. The ∑₃₄PCB levels were found to be negatively correlated with mother’ age (r = ?0.31; p = 0.02), parity (r = ? 0.85; p = 0.001), and infant’ birth weight (r = ? 0.73; p = 0.01). The present study suggests undertaking comprehensive public health risk assessment studies and firm regulatory measures to safeguard human health risks.

     

Environmental factors affecting the frequency of road traffic accidents: a case study of sub-urban area of Pakistan

Road traffic accidents (RTAs) are among the life-threatening issues facing rural as well as sub-/urban communities. Several factors contribute to RTAs ranging from human to technical and natural/environmental impacts. Anthropogenic air pollution and corresponding environmental factors also increase the probability of RTAs. Current study reports the relationship of the weather conditions to RTAs. The study establishes the relevancy of different weather conditions like rainfall, temperature, fog, and wind storm with the incidences of RTAs in rural and urban settings of Vehari, Punjab—Pakistan. The results of the study showed that rainfall, severe coldness, fog, and heat conditions were directly related with the occurrence of RTAs. The percentage of RTAs which occurred due to fog, rainfall, temperature, and other weather-related factors was 34, 25, 21, and 20%, respectively. The age of the driver significantly correlated (R²?=?0.60) with RTAs; the drivers in the age group 40–60 years caused the least RTAs during their drive. Since the smaller vehicles were involved in maximum RTAs, it relates negatively (R²?=?0.82) to vehicles power. Among different vehicles motor bikes were involved in most (42%) of the reported RTAs. Therefore, during severe weather conditions, vehicles with smaller size and young drivers must be dealt with carefully while interacting (crossing, overtaking, and maneuvering) on the roads regardless of rural or urban conditions. Factors including civic sense, traffic education, vehicle size, drivers’ maturity, road conditions, and environmental impacts may be considered while designing traffic rules and traffic aware campaigns specific for developing countries such as Pakistan.

     

A metric-based assessment of climate and tourism in major cities of Pakistan

Environment, Development and Sustainability - Tourism plays an essential role in the economic development of a country and has become a growing phenomenon of global importance. The climate change...     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.