Seasonal appearance of Chlorophyceae phytoplankton bloom by river discharge off Paradeep at Orissa Coast in the Bay of Bengal

Characteristics of the monsoonal bloom of phytoplankton at Orissa Coast in the Bay of Bengal were studied through bimonthly observation from April 2001 to December 2002. Three photosynthetic pigments chlorophyll-a (Chl a), chlorophyll-b (Chl b) and carotenoid (Car) were analyzed by absorption spectroscopic method. The seasonal variation of Chl a included phytoplankton bloom in the coastal area during monsoon period. The water column integrated Chl a reached to 68 mg m(-2) at the station-1(St1), and amounted to 20 mg m(-2) at 30 km off the river mouth during August 2001. In contrast the same amount was found at 15 km off the Mahanadi river mouth during August 2002. Salinity during this period varied from 5 psu at the St1 to 27 psu at the edge of the bloom area. The total amount of river discharge in the monsoon period calculated from daily river discharge data reported by Water Resources Department in India was 84 x 10(9) m(3) during 2001 and 20 x 10(9) m(3) during 2002. Both nitrate and phosphate concentrations showed negative quadratic relationship with salinity throughout the observation period. Extrapolated nitrate and phosphate concentration discharge from the Mahanadi river were 10.8 and 4 microg-at l(-1), respectively. Microscopic identification revealed dominance of fluvial Chlorophyceae and diatoms during the monsoon period showing influence of the freshwater discharge.     

Influence of different nitrogen rich supplements during cultivation of <Emphasis Type="Italic">Pleurotus </Emphasis><Emphasis Type="Italic">florida</Emphasis> on corn cob substrate

The cultivation of white rot edible fungus Pleurotus florida was performed in polybags. The corn cob was employed as basal substrate while eight different additives such as urea, ammonium sulphate, gram flour, soybean meal, ground nut cake and molasses were used with corn cob. Three different levels of variable combinations with corn cob were evaluated in response to different parameters of mushroom viz., mycelial growth, spawn running, primordial initiation, fruit body yield and its biological efficiency. Each additive at different combinations showed variable impact on the different stages of mushroom life cycle. The primordial initiation was observed for the first time during 20.2–35.1 days. The biological efficiencies in every supplemented set were increased over un-supplemented control set. Increasing the level of additives, the biological efficiency was negatively affected at higher levels. The cotton seed cake was found the best supplement producing 93.75% biological efficiency while soybean meal was the second best additive producing 93.00% yield. The highest growth rate, rapid mycelia run, early primordial initiation, highest yield and biological efficiency were recorded in the combination of corn cob and cotton seed cake at 2% (98 + 2) level.     

Distribution and fate of persistent organochlorine pesticides in coastal marine environment of Mumbai

Multi-compartment monitoring of residue levels of OCPs in coastal marine environment of Mumbai has been studied. The concentration of total HCHs in seawater varied from 0.16 to 15.92 ng/L and concentrations of total DDT varied from 3.01 to 33.21 ng/L. The total HCH concentration in the sediment samples was in the range of 3.8 to 16.2 ng/g. Gamma-HCH contributed almost 55% to the total HCH. In sediment samples the DDT has higher mean concentration in comparison to its metabolite DDE and DDD. The concentration of total HCHs in different marine species varied from 0.87 to 33.73 ng/g and concentrations of total DDT varied from 0.38 to 34.1 ng/g. The variation in the beta-HCH in different compartments is not significant and this could be due to the high persistence and metabolically inactive nature of this isomer. The alpha-HCH is found to be more dominant in fish samples whereas the gamma-HCH is major contributor in the sediment samples.     

Impact of climate change on cereal production: evidence from lower-middle-income countries

Environmental Science and Pollution Research - This study empirically examines the impact of climate change on cereal production in selected lower-middle-income countries with a balanced panel...     

Hydrogeochemical behavior of arsenic-enriched groundwater in the deltaic environment: comparison between two study sites in West Bengal, India

Groundwaters have been collected from deltaic areas of West Bengal (Chakdaha and Baruipur blocks) to record their hydrogeochemical characteristics, and to verify the mechanism of arsenic (As) release. The data reveals that shallow (<70 m) groundwaters in both areas are of Ca-Mg-HCO(3) type; however deeper (>70 m) groundwaters in Baruipur areas are slightly enriched with Na, Cl and SO(4), indicating possible saline water intrusion. The groundwater is anoxic (mean Eh: -124 and -131 mV) with high levels of As (mean: 116 and 293 mug/L), Fe (mean: 4.74 and 3.83 mg/L), PO(4) (mean: 3.73 and 3.21 mg/L) and Mn (mean: 0.37 and 0.49 mg/L), respectively for Chakdaha and Baruipur areas. The observed values of As and bicarbonate (mean: 409 and 499 mg/L) in the shallow aquifer are indicative of redox processes (e.g., oxidation of organic matter) favouring the release of As. Moreover, the presence of DOC in the shallow aquifer suggests that organic matter is young and reactive, and may actively engage in redox driven processes. Our study further confirms that both Fe- and Mn-reduction processes are the dominant mechanisms for As release in these groundwaters.     

Distribution and ecotoxicological concerns of persistent organic pollutants in sediment from creek ecosystem

In order to study the distribution and ecotoxicological concerns of persistent organic pollutants, grab sediment samples were collected from different locations across Thane creek, India. Analyses of samples were carried out using gas chromatography (GC)–electron capture detector and GC–mass spectrometry techniques. In organochlorine pesticides (OCPs), DDT (1,1,1,-trichloro-2,2-bis(p-chlorophenyl) ethane), DDE (1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene), DDD (1-chloro-4-(2,2-dichloro-1-(4-chlorophenyl)ethyl) benzene) and α, β, and γ conformer of hexachlorocyclohexane (HCH), and 9 polychlorinated biphenyls (PCBs) congeners were analyzed in surface sediment samples. Concentrations of these pollutants in grab sediment samples may indicate their current use and impact on marine ecosystem. Average concentrations of total DDT (including DDD and DDE), HCH, and Σ₉PCBs were found to be 4.9, 12.5, and 2.9 µg kg^?1(dry weight) respectively. High concentrations of OCPs and PCBs were found at discharge locations in creek compared to other locations. Location-wise distribution of OCPs and PCBs indicates their high concentrations at the waste water receiving point. Data were compared for ecotoxicological impacts based on the levels specified in the sediment quality standards of the US Environmental Protection Agency and the Canadian Council of Ministers of the Environment. γ-HCH was found to have maximum potential to induce ecotoxicological impacts.     

Remediation technologies for heavy metal contaminated groundwater

The contamination of groundwater by heavy metal, originating either from natural soil sources or from anthropogenic sources is a matter of utmost concern to the public health. Remediation of contaminated groundwater is of highest priority since billions of people all over the world use it for drinking purpose. In this paper, thirty five approaches for groundwater treatment have been reviewed and classified under three large categories viz chemical, biochemical/biological/biosorption and physico-chemical treatment processes. Comparison tables have been provided at the end of each process for a better understanding of each category. Selection of a suitable technology for contamination remediation at a particular site is one of the most challenging job due to extremely complex soil chemistry and aquifer characteristics and no thumb-rule can be suggested regarding this issue. In the past decade, iron based technologies, microbial remediation, biological sulphate reduction and various adsorbents played versatile and efficient remediation roles. Keeping the sustainability issues and environmental ethics in mind, the technologies encompassing natural chemistry, bioremediation and biosorption are recommended to be adopted in appropriate cases. In many places, two or more techniques can work synergistically for better results. Processes such as chelate extraction and chemical soil washings are advisable only for recovery of valuable metals in highly contaminated industrial sites depending on economical feasibility.     

A fast Bayesian method for updating and forecasting hourly ozone levels

A Bayesian hierarchical space-time model is proposed by combining information from real-time ambient AIRNow air monitoring data, and output from a computer simulation model known as the Community Multi-scale Air Quality (Eta-CMAQ) forecast model. A model validation analysis shows that the model predicted maps are more accurate than the maps based solely on the Eta-CMAQ forecast data for a 2 week test period. These out-of sample spatial predictions and temporal forecasts also outperform those from regression models with independent Gaussian errors. The method is fully Bayesian and is able to instantly update the map for the current hour (upon receiving monitor data for the current hour) and forecast the map for several hours ahead. In particular, the 8 h average map which is the average of the past 4 h, current hour and 3 h ahead is instantly obtained at the current hour. Based on our validation, the exact Bayesian method is preferable to more complex models in a real-time updating and forecasting environment.