Does irrigation with reclaimed water significantly pollute shallow aquifer with nitrate and salinity? An assay in a perurban area in North Tunisia

In Tunisia, reclaimed water is increasingly used for irrigation in order to mitigate water shortage. However, few studies have addressed the effect of such practice on the environment. Thus, we attempted in this paper to assess the impact of irrigation with reclaimed water on the nitrate content and salinity in the Nabeul shallow aquifer on the basis of satellite images and data from 53 sampled wells. Ordinary and indicator kriging were used to map the spatial variability of these groundwater chemical parameters and to locate the areas where water is suitable for drinking and irrigation. The results of this study have shown that reclaimed water is not an influential factor on groundwater contamination by nitrate and salinity. Cropping density is the main factor contributing to nitrate groundwater pollution, whereas salinity pollution is affected by a conjunction of factors such as seawater interaction and lithology. The predictive maps show that nitrate content in the groundwater ranges from 9.2 to 206 mg/L while the electric conductivity ranges from 2.2 to 8.5 dS/m. The high-nitrate concentration areas underlie sites with high annual crop density, whereas salinity decreases gradually moving away from the coastline. The probability maps reveal that almost the entire study area is unsuitable for drinking with regard to nitrate and salinity levels. Appropriate measures, such as the elaboration of codes of good agricultural practices and action programs, should be undertaken in order to prevent and/or remediate the contamination of the Nabeul shallow aquifer.     

Bench-scale gasification of cedar wood – Part I: Effect of operational conditions on product gas characteristics

The present study was conducted within the framework of R&D activities on the development of gasification and reforming technologies for energy and chemical recovery from biomass resources. Gasification of the Japanese cedar wood has been investigated under various operating conditions in a bench-scale externally heated updraft gasifier; this was followed by thermal reforming. Parametric tests by varying the residence times, gasification temperatures, equivalence ratios (ERs) and steam-to-carbon (S/C) ratios were performed to determine their effects on the product gas characteristics. Thermodynamic equilibrium calculations were preformed to predict the equilibrium gas composition and compared with the experimental value.We found that the product gas characteristics in terms of the H₂/CO ratio, CO₂/CO ratio, and CH₄ and lighter hydrocarbons concentrations are significantly affected by the operating conditions used. Increasing the residence time decreased the CO₂/CO ratio; however, a nominal effect was noticed on H₂ concentration as a function of the residence time. At sufficient residence time, increasing the temperature led to higher H₂ yields, CO efficiency and higher heating value (HHV) of the product gas. The presence of steam during gasification effectively enhanced the proportion of H₂ in the product gas. However, higher S/C ratio reduced the HHV of the product gas. Increasing the ER from 0 to 0.3 increased the H₂ yields and CO efficiency and decreased the HHV of the product gas.The evolution of CH₄ and lighter hydrocarbons at low gasification temperatures was relatively higher than that at high temperature gasification. The evolution of CH₄ and lighter hydrocarbons at high gasification temperatures hardly varied over the investigated operating conditions.     

Biodegradation Properties of Poly-ε-caprolactone,Starch and Cellulose Acetate Butyrate Composites

Blending starches with polymers such as poly-ε-caprolactone (PCL) has been used as a route to biodegradable plastics. The addition of starch has a significant effect on all physical properties including toughness, elongation at break. On blending cellulose acetate butyrate (CAB) with starch and PCL, improvements in most physical and mechanical properties were observed. This is may be due to CAB acts as a compatibilizer between PCL and starch due to the presence of both hydroxyl groups (in starch and CAB) and ester carbonyls (in PCL and CAB). The presence of different compounds affects the way in which other components degrade. For example the structure of CAB within a starch and PCL combination might make the degradation rate different to that when starch was only mixed with PCL. To check whether this was the case, three combinations of different blends were used to calculate the rate of degradation of each of them separately. These degradation rate constants were then used to predict the theoretical degradation which was checked against the experimental value for other different combinations.     

Changes in water-extractability of soil inorganic phosphate induced by chloride and sulfate salts

GOAL, SCOPE AND BACKGROUND: One of the principal experimental variables which effect the results of phosphorus (P) sorption studies is the ionic composition, in addition to both species and concentrations of the contacting solution. In spite of the realization that ionic species, concentrations and their compositions effect P sorption and/or desorption, most of the salt-related studies are confined to Cl- (anion) in association with different cations. While the knowledge about the comparative response of P to Cl- and SO4(2-) ions was lacking, the current study was conducted to evaluate the comparative effects of anions (in association with cations) on inorganic P release and P fractions in the soil. METHODS: The test soil was amended with livestock compost manure (OP); KH2PO4 (IPk) or Ca(H2PO4)2 (IPc) at a rate of 1ppm. Soil was subjected to one salt and nine subsequent water extractions and different P fractions were measured. Four salt types, NaCl, Na2SO4, KCl and K2SO4, were used at levels of 0.5 M. RESULTS: Irrespective of P sources, P release was substantially increased in the salt-pretreated soil as compared to the non-saline soil. Sulfate salts released more P in subsequent water extractions than Cl-. Phosphorus release decreased for salt types with Na2SO4 > NaCl > K2SO4 > KCl and for P sources with OP approximately IPk > Control (without P application) > IPc, respectively. DISCUSSION: No previous study was found to compare the results of more P release by SO4(2-) than Cl- salt. Most of the previous studies focused on anion sorption capacities, but the mechanism for their adsorption is not fully known. Most of the authors suggested that the mechanisms of SO4(2-) and PO4(3-) adsorption are similar, and that both ions compete for the same sorption sites (Kamprath et al. 1956, Couto et al. 1979, Pasricha and Fox 1993). Although adsorbed SO4(2-) does not compete strongly with PO4(3-), there is likely to be some competition for sorption between these anions which may cause comparatively more P release by SO4(2-) than Cl- salts. Higher P release by Na-saturation could be due to the release of P associated with oxide surfaces or due to dissolution of Ca-P phases (Curtin et al. 1987). CONCLUSIONS: Study clearly showed that not only cations species differ for P desorption capacity, but associated anions also play a vital role in the fate of P under saline environments. Synergetic effects exist between Na and SO4(2-) ions which enhanced the P release. This study has also confirmed the fact that P from organic sources is available as well as from inorganic P sources. However, P release depends more on the type of P source applied than on total P. RECOMMENDATIONS AND PERSPECTIVES: It is highly recommended that more than one anion species must be used in the research plans for evaluating the P response in a saline environment. The results have important implications from the point of view of research, as most of the researchers focus on different cations only for evaluating P response to salts from an environmental point of view. However, our study has made it clear that anions in association with cations differed for their effects on P release.     

Peri-urban agro-ecosystems in the Mediterranean: diversity,dynamics, and drivers

Regional Environmental Change - To address sustainability challenges of agro-ecosystems located in Mediterranean urban regions, this paper focuses on the multidisciplinary subject of urban...     

Modeling hourly dissolved oxygen concentration (DO) using two different adaptive neuro-fuzzy inference systems (ANFIS): a comparative study

This article presents a comparison of two adaptive neuro-fuzzy inference systems (ANFIS)-based neuro-fuzzy models applied for modeling dissolved oxygen (DO) concentration. The two models are developed using experimental data collected from the bottom (USGS station no: 420615121533601) and top (USGS station no: 420615121533600) stations at Klamath River at site KRS12a nr Rock Quarry, Oregon, USA. The input variables used for the ANFIS models are water pH, temperature, specific conductance, and sensor depth. Two ANFIS-based neuro-fuzzy systems are presented. The two neuro-fuzzy systems are: (1) grid partition-based fuzzy inference system, named ANFIS_GRID, and (2) subtractive-clustering-based fuzzy inference system, named ANFIS_SUB. In both models, 60 % of the data set was randomly assigned to the training set, 20 % to the validation set, and 20 % to the test set. The ANFIS results are compared with multiple linear regression models. The system proposed in this paper shows a novelty approach with regard to the usage of ANFIS models for DO concentration modeling.     

A risk-based approach to design warning system for processing facilities

Alarm flooding is a major safety issue in today's processing facilities. Important recommendations are available for alarm management; however, they are often violated in practice, especially in the alarm systems implemented through the distributed control system. An effective process alarm prioritization and management system is desired for a safe and effective operation of a process facility.In present work, authors address two main issues related to an alarm system – the reliability and the prioritization of the alarms. The main objective is to deal with the alarm-flooding problem in process facilities. A multi alert voting system based on sensor redundancy approach is proposed to improve the reliability. A quantitative risk-based alarm management approach is proposed to address the flooding issue. In the risk-based approach, an integrated model consisting of the probability (P), the impact (I) of the potential hazards, and the process safety time is proposed to prioritize these raised alarms.The proposed approach is further explained by a reactor system with pressure and temperature variable monitoring and controls, where the hazards associated with two alerts caused by over high pressure and over high temperature are analyzed and integrated with response time for alarms generation and prioritization.     

Development of Nanocomposite Films Based on Chitosan and Gelatin Loaded with Chitosan-Tripolyphosphate Nanoparticles: Antioxidant Potentials and Applications in Wound Healing

Journal of Polymers and the Environment - Recently, there is an increasing interest to prepare wound healing agents based on bio-polymers, due to their non-toxicity, biocompatibility and...     

Delayed neurotoxicity in the wild mallard duckling caused by the organophosphorus insecticides cyanofenphos and leptophos

Abstract

The susceptibility of wild mallard ducklings to the delayed neurotoxic effect of the neurotoxic organophosphorus insecticides cyanofenphos and leptophos was evaluated following a daily dosing regimen. Ducklings were treated daily with either cyanofenphos or with leptophos at different dose levels for 90 days, or until they died, or became paralyzed. A control group of ducklings given corn oil at 1 ml/kg daily for 90 days was used for comparison. All treated birds were observed daily for any clinical signs of neurotoxicity during the course of this study. All of the surviving ducklings that were treated with cyanofenphos at 4 mg/kg/day or leptophos at 10 mg/kg/day developed clinical signs of delayed neurotoxicity after 7 to 11 weeks of intoxication. Symptoms included leg weakness, ataxia, severe ataxia and paralysis. The observed clinical signs were confirmed by histological changes found in the spinal cords of the treated birds. These changes were of the type associated with organophosphorus‐induced delayed neuropathy (OPIDN). These results demonstrate that wild mallard ducklings are susceptible to OPIDN and this avian species can be used in screening organophos‐phorus compounds for such effect.     

Predictive model for disinfection by-product in Alexandria drinking water, northern west of Egypt

Chlorine has been utilized in the early stages of water treatment processes as disinfectant. Disinfection for drinking water reduces the risk of pathogenic infection but may pose a chemical threat to human health due to disinfection residues and their by-products (DBP) when the organic and inorganic precursors are present in water. In the last two decades, many modeling attempts have been made to predict the occurrence of DBP in drinking water. Models have been developed based on data generated in laboratory-scale and field-scale investigations. The objective of this paper is to develop a predictive model for DBP formation in the Alexandria governorate located at the northern west of Egypt based on field-scale investigations as well as laboratory-controlled experimentations. The present study showed that the correlation coefficient between trihalomethanes (THM) predicted and THM measured was R ²?=?0.88 and the minimum deviation percentage between THM predicted and THM measured was 0.8 %, the maximum deviation percentage was 89.3 %, and the average deviation was 17.8 %, while the correlation coefficient between dichloroacetic acid (DCAA) predicted and DCAA measured was R ²?=?0.98 and the minimum deviation percentage between DCAA predicted and DCAA measured was 1.3 %, the maximum deviation percentage was 47.2 %, and the average deviation was 16.6 %. In addition, the correlation coefficient between trichloroacetic acid (TCAA) predicted and TCAA measured was R ²?=?0.98 and the minimum deviation percentage between TCAA predicted and TCAA measured was 4.9 %, the maximum deviation percentage was 43.0 %, and the average deviation was 16.0 %.