Quantifying local traffic contributions to NO2 and NH3 concentrations in natural habitats

NO₂ and NH₃ concentrations were measured across a Special Area for Conservation in southern England, at varying distances from the local road network. Exceedances of the critical levels for these pollutants were recorded at nearly all roadside locations, extending up to 20 m away from roads at some sites. Further, paired measurements of NH₃ and NO₂ concentrations revealed differences between ground and tree canopy levels. At “background” sites, away from the direct influence of roads, concentrations were higher within tree canopies than at ground level; the reverse pattern was, however, seen at roadside locations. Calculations of pollutant deposition rates showed that nitrogen inputs are dominated by NH₃ at roadside sites. This study demonstrates that local traffic emissions contribute substantially to the exceedance of critical levels and critical loads, and suggests that on-site monitoring is needed for sites of nature conservation value which are in close proximity to local transport routes.     

Perceived Effects of Setting Attributes on Visitor Experiences in Wilderness: Variation with Situational Context and Visitor Characteristics

Understanding how setting attributes influence the nature of the visitor experience is crucial to effective recreation management. Highly influential attributes are useful indicators to monitor within a planning framework, such as Limits of Acceptable Change. This study sought to identify the setting attributes perceived to have the most profound effect on the ability to have “a real wilderness experience” and to assess the degree to which attribute importance varied with situational context and visitor characteristics. To this end, exiting hikers were surveyed at moderate and very high use trailheads in Alpine Lakes Wilderness, WA (USA), and Three Sisters Wilderness, OR (USA). They were asked about the degree to which encountering varying levels of different setting attributes would add to or detract from their experience. Attributes with the largest range of effect on experience, based on evaluations of different levels, were considered most important. The most influential attributes were litter and several types of campsite interaction—people walking through camp and number of other groups camping close by. The perceived importance of setting attributes did not vary much between wilderness locations with substantially different use levels, suggesting that conclusions are robust and generalizable across wilderness areas. There also was little difference in the perceptions of day and overnight visitors. In contrast, we found substantial variation in the perceived importance of setting attributes with variation in wilderness experience, knowledge, attachment, and motivation. Our results validate the emphasis of many wilderness management plans on indicators of social interaction, such as number of encounters.     

The major accident risk (MAR) process - developing the profile of major accident risk for a large multi national oil company

The paper describes a programme to develop the profile of major accident risk across a large multi national oil company. It describes the concepts, tools and processes for constructing the risk profile and some of the key learnings from the exercise.     

Social-ecological system resonance: a theoretical framework for brokering sustainable solutions

Sustainability science is a solution-oriented discipline. Yet, there are few theory-rich discussions about how this orientation structures the efforts of sustainability science. We argue that Niklas Luhmann’s social system theory, which explains how societies communicate problems, conceptualize solutions, and identify pathways towards implementation of solutions, is valuable in explaining the general structure of sustainability science. From Luhmann, we focus on two key concepts. First, his notion of resonance offers us a way to account for how sustainability science has attended and responded to environmental risks. As a product of resonance, we reveal solution-oriented research as the strategic coordination of capacities, resources, and information. Second, Luhmann’s interests in self-organizing processes explain how sustainability science can simultaneously advance multiple innovations. The value logic that supports this multiplicity of self-organizing activities as a recognition that human and natural systems are complex coupled and mutually influencing. To give form to this theoretical framework, we offer case evidence of renewable energy policy formation in Texas. Although the state’s wealth is rooted in a fossil-fuel heritage, Texas generates more electricity from wind than any US state. It is politically antagonistic towards climate-change policy, yet the state’s reception of wind energy technology illustrates how social and environmental systems can be strategically aligned to generate solutions that address diverse needs simultaneously. This case demonstrates that isolating climate change—as politicians do as a separate and discrete problem—is incapable of achieving sustainable solutions, and resonance offers researchers a framework for conceptualizing, designing, and communicating meaningfully integrated actions.     

Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins

The controlled pyrolysis of polyethylene/polypropylene/polystyrene mixed with brominated high-impact polystyrene containing decabromodiphenyl ether as a brominated flame-retardant with antimony trioxide as a synergist was performed. The effect of decabromodiphenyl ether and antimony trioxide on the formation of its congeners and their effect on distribution of pyrolysis products were investigated. The controlled pyrolysis significantly affected the decomposition behavior and the formation of products. Analysis with gas chromatograph with electron capture detector confirmed that the bromine content was rich in step 1 (oil 1) liquid products leaving less bromine content in the step 2 (oil 2) liquid products. In the presence of antimony containing samples, the major portion of bromine was observed in the form of antimony bromide and no flame-retardant species were found in oil 1. In the presence of synergist, the step 1 and step 2 oils contain both light and heavy compounds. In the absence of synergist, the heavy compounds in step 1 oil and light compounds in step 2 oils were observed. The presence of antimony bromide was confirmed in the step 1 oils but not in step 2 oils.     

Community opinion concerning airport noise-abatement alternatives

In the present study we examined (1) community opinion of airport noise-abating alternatives and (2) the influence of perceived control on attitudes concerning noise-abatement policies and annoyance toward aircraft noise. We proposed that residents who perceive themselves as having little control over aircraft noise exposure would express higher levels of annoyance than residents who believe they have some degree of control. Furthermore, residents with low levels of perceived control would be less favorable toward proposed noise-abatement alternatives. Survey results collected from 239 households within the 65 CNEL contour of a community airport in Southern California support these hypotheses. Findings indicate strong public support for noise abatement and strong opposition to land-use alternatives. In addition, residents' perceptions of control in the airport planning and management process are significantly related to their annoyance with noise and their opinions about noise management policies.     

Innovation in the minerals industry: Australia in a global context

The pattern of innovation in the global minerals industry is changing as the industry becomes increasingly globalised. In this paper, we look at the structure of innovation in the industry and the drivers of change. We first consider the broad international trends and then examine these more closely with special reference to the Australian industry. Issues addressed include the apparent decline in corporate research and development spending, changing patterns in research collaboration and outsourcing, and the uptake of information and communication technologies in the industry. We also look at the potential implications of these trends for step-change technological developments and at the role of technological innovation in the future development of the industry.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.