Changes in landscape and vegetation of coastal dunes in northwest Europe: a review

In coastal dunes, landscape changes are a rule, rather than an exception. This paper gives an overview of changes in landscape and vegetation with a focus on the past century. The history of dunes is characterised by phases of sand drift, alternated with geomorphological stability. The historical development of dune woodland during these stable phases has been documented for sites all over Europe. Vegetation reconstructions of historical open dune habitats however is very difficult due to limited preservation of fossil remains. People have drastically altered coastal dune landscapes through centuries of exploitation and more recently development of the coast. Historical land use has generally pushed vegetation back into a semi-natural state. During roughly the past century a tendency of increasing fixation and succession is observed on coastal dunes throughout northwest Europe. Six causes of change are discussed. 1) Changes in land use, mainly abandonment of agricultural practices, have led to the development of late successional stages such as scrub and woodland. 2) Crashing rabbit populations due to myxomatosis in the 1950s caused vigorous grass growth and probably stimulated scrub development. 3) A general tendency of landscape fixation is observed due to both natural and anthropogenic factors. 4) Eutrophication, mainly due to atmospheric nitrogen deposition is clearly linked to grass encroachment on acidic but also on some calcareous dunes. 5) The impact of climate change on vegetation is still unclear but probably lengthening of growing season and maybe enhanced CO₂ concentrations have led to an acceleration of succession. 6) A general anthropogenisation of the landscape occurs with rapid spread of non-native species as an important consequence. The reconstruction of a natural reference landscape is considered largely unattainable because of irreversible changes and the long tradition of human impact, in many cases since the development of the dunes. Two contradictory elements need reconciliation. First, the general acceleration of succession and scrub and woodland development in particular is partly caused by a decreased anthropogenic interference in the landscape and deserves more appreciation. Second, most biodiversity values are largely linked to open, early succession dune habitats and are threatened by the same tendency. Apart from internal nature management, in which grazing plays an important part, re-mobilisation of stable, senescent dunes is an important challenge for dune management.     

Contaminant mass flux and forensic assessment of polycyclic aromatic hydrocarbons: Tools to inform remediation decision making at a contaminated site in Canada

Polycyclic aromatic hydrocarbons (PAHs) and metal(loid) mass flux estimates and forensic assessment using PAH diagnostic ratios were used to inform remediation decision making at the Sydney Tar Ponds (STPs) and Coke Ovens cleanup project in eastern Canada. Environmental effects monitoring of surface marine sediments in Sydney Harbor indicated significantly higher PAH concentrations during the first year of remediation monitoring compared to baseline. This was equivalent to PAH loadings of ～2,000 kg over a 15‐month period. Increases in sediment PAH concentrations raised serious concerns for regulators, who requested cessation of remediation activities early in the $400 M (CAD) project. Historically, the STPs were reported as the primary source of PAH contamination in Sydney Harbor with estimated discharges of 300 to 800 kg/year between 1989 and 2001. Mass flux estimates of PAHs and metal(loid)s and PAH diagnostic ratios were used to evaluate if increases in PAH concentrations in marine sediments were the result of the STPs remediation activities. PAH mass flux estimates approximated that 17 to 97 kg/year were discharged from the STPs during three years of remediation and were corroborated by an independent PAH flux estimate of 119 kg in year 1. PAH fluxes to the Sydney Harbor were mostly surface water derived, with groundwater contributing negligible quantities (0.002–0.005 kg/year). Fluxes of metal(loid)s to harbor sediments were stable or declining across all years and were mirrored in sediment metal(loid) concentrations, which lacked temporal variation, unlike total PAH concentrations. Flux results were also corroborated using PAH diagnostic ratios, which found a common source of PAHs. Coal combustion was likely the principal source of PAHs and not migration from the STPs during remediation. Although short‐term residual sediment PAH increases during onset of remediation raised concerns for regulators, calls for premature cessation of remediation early in the project were unwarranted based on only one year of monitoring data. Mass flux estimates and forensic assessments using PAH diagnostic ratios proved useful tools to inform remediation decision making that helped environmental protection and reduced costs associated with lost cleanup time.     

Environmental Effects Monitoring in Sydney Harbor During Remediation of One of Canada's Most Polluted Sites: A Review and Lessons Learned

This article reviews a comprehensive marine environmental effects monitoring program (MEEMP) comprised of components capable of detecting changes in the marine environment over short or extended temporal scales during remediation of one of Canada's most polluted sites at the Sydney Tar Ponds. The monitoring components included: water and sediment quality, amphipod toxicity testing, mussel tissue, crab hepatopancreas tissue, and benthic community assessments. The MEEMP was designed to verify the impact predictions for the remediation project (i.e., no immediate damage to the marine ecosystem through remediation activities). Some components were capable of providing conclusive data (e.g., sediment and water quality), while others only yielded data that were inconclusive or difficult to attribute to remediation activities (e.g., intertidal community assessments and amphipod toxicity testing). Components that provided only inconclusive results or were difficult to attribute to remediation activities were discontinued, resulting in substantial cost savings during the project, but without compromising the overall objectives of the program, which was to monitor for potential adverse environmental effects of remediation on the marine environment in Sydney Harbor and to verify environmental effects predictions made in the Environmental Impact Statement for the project. The rationale for discontinuing certain MEEMP components and discussion of conclusive results are incorporated into “lessons learned” for environmental remediation practitioners and regulators working on similar large‐scale multiyear remediation projects. © 2014 Wiley Periodicals, Inc.     

Air pollution exposure monitoring and estimation. Part VI. Ambient exposure of adults in an industrialised region

This paper presents methodology and results of a dynamic individual air pollution exposure model (DINEX) that calculates the hourly exposure for each adult in a panel study. Each of over 260 participants, through the use of a diary, provided information used in the model to calculate his/her personal, individualised exposure. The participants filled out the diary daily, hour by hour, over two, two month periods. The exposure assessment model coupled the diary information and results of an indoor/outdoor measurement program, with the results of dispersion modelling on an hourly basis for an industrial area in Norway. The estimated air pollution concentrations from the dispersion model, based on continuous meteorological measurements, were calibrated with air pollutant concentrations measured continuously.     

Cost‐Effective Sediment Dredge Disposal Options for Small Craft Harbors in Canada

Sediment dredge disposal options were reviewed to improve cost‐effectiveness and environmental safety for dredging of coastal sediments at the Department of Fisheries and Oceans Small Craft Harbours (DFO‐SCH) program in Canada. Historically, contaminated dredge sediments exceeding federal guidelines were disposed of in nearby landfills. Recent federal regulatory changes in sediment quality guidelines adopted by provincial regulators in Canada has resulted in updates to guidelines for disposal of contaminated solids in landfills. Updates now require specific and general disposal options for contaminated dredge material destined for land‐based disposal, resulting in more expensive disposal in containment cells (if contaminated sediments exceed federal guidelines). However, as part of this study, a leachate testing method was applied to contaminated sediments to simulate migration of potential contaminants in groundwater. Using this approach, leachate quality was compared to federal freshwater criteria and drinking water quality guidelines for compliance with new regulations. Leachate testing performed on the highest sediment contaminant concentrations triggered less than 2 percent potable water exceedances, meaning that most dredge spoils could be disposed of in privately owned or provincially operated landfill sites, providing less expensive disposal options compared to containment cell disposal. Current dredge disposal practices were reviewed at 35 harbor sites across Nova Scotia and their limitations identified in a gap analysis. Improved site management was developed following this review and consultation with interested marine stakeholders. New disposal options and chemical analyses were proposed, along with improvements to cost efficiencies for management of dredged marine sediments in Atlantic Canada. © 2013 Wiley Periodicals, Inc.     

The variability in nutrient composition of Anaerobic Digestate granules produced from high shear granulation

This study investigates the production of organic fertilizer using Anaerobic Digestate (as a nutrient source) and limestone powder as the raw materials. A two-level factorial experimental design was used to determine the influence of process variables on the nutrient homogeneity within the granules. Increasing the liquid-to-solid ratio during granulation resulted in increased granule nutrient homogeneity. Increasing the processing time and the impeller speed were also found to increase the nutrient homogeneity. In terms of nutrients release into deionized water, the granules effectively released both potassium and phosphate into solution.     

Identifying fecal sources in a selected catchment reach using multiple source-tracking tools

Given known limitations of current microbial source-tracking (MST) tools, emphasis on small, simple study areas may enhance interpretations of fecal contamination sources in streams. In this study, three MST tools-Escherichia coli repetitive element polymerase chain reaction (rep-PCR), coliphage typing, and Bacteroidales 16S rDNA host-associated markers-were evaluated in a selected reach of Plum Creek in south-central Nebraska. Water-quality samples were collected from six sites. One reach was selected for MST evaluation based on observed patterns of E. coli contamination. Despite high E. coli concentrations, coliphages were detected only once among water samples, precluding their use as a MST tool in this setting. Rep-PCR classification of E. coli isolates from both water and sediment samples supported the hypothesis that cattle and wildlife were dominant sources of fecal contamination, with minor contributions by horses and humans. Conversely, neither ruminant nor human sources were detected by Bacteroidales markers in most water samples. In bed sediment, ruminant- and human-associated Bacteroidales markers were detected throughout the interval from 0 to 0.3 m, with detections independent of E. coli concentrations in the sediment. Although results by E. coli-based and Bacteroidales-based MST methods led to similar interpretations, detection of Bacteroidales markers in sediment more commonly than in water indicates that different tools to track fecal contamination (in this case, tools based on Bacteroidales DNA and E. coli isolates) may have varying relevance to the more specific goal of tracking the sources of E. coli in watersheds. This is the first report of simultaneous, toolbox approach application of a library-based and marker-based MST analyses to flowing surface water.     

Metal bioavailability and speciation in a wetland tailings repository amended with biosolids compost,wood ash,and sulfate

Lead poisoning of waterfowl from direct ingestion of wetland mine tailings has been reported at the Coeur d'Alene River basin in Idaho. A greenhouse study was conducted to evaluate the effects of surface applications of amendments on lead bioavailability in the tailings. Treatments included sediment only, and sediment with three different surface amendments: (i) biosolids compost plus wood ash, (ii) compost + wood ash + a low SO4(2-) addition as K2SO4, and (iii) compost + wood ash + a high SO4(2-) addition. Measured variables included growth and tissue Pb, Zn, and Cd concentration of arrowhead (Sagittaria latifolia Willd.) and cattail (Typha latifolia L.) and soil pH, redox potential (Eh), pore water Pb, Pb speciation by X-ray absorption spectroscopy, and in vitro Pb bioavailability. The compost + ash amendment alleviated phytotoxicity for both plant species. Bioavailability of Pb as measured by a rapid in vitro extract decreased by 24 to 34% (over control) in the tailings directly below the amendment layer in the compost + SO4 treatments. The ratio of acid volatile sulfide (AVS) to simultaneously extracted metals (SEM) also indicated a reduction in Pb bioavailability (1:40 control, 1:20 compost, 1:8 compost + low SO4, and 1:3 compost + high SO4). Extended X-ray adsorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopy data indicated that lead sulfide was greater after 99 d in the treatments that included additions of sulfate. These results indicated that, under reducing conditions, surface amendments of compost + wood ash (with or without sulfate) decreased the bioavailability of Pb in metal-contaminated mine tailings.     

INSIGHT: a framework for determining impacts of changes in land and water policies.

CSIRO Sustainable Ecosystems is constructing a spatially explicit modelling system capable of exploring alternative land and water policy alternatives against plausible price, cost, and climate scenarios for the next 20 years. INSIGHT will be used to identify the likely impacts of land and water policy options on regional economies and structural adjustment. Flowcharts have been constructed for most of the major crop and pasture and associated economic models for commodities produced in the Lachlan River Catchment of New South Wales. This enabled the most important components and interrelationships within these models to be readily identified. The next step has been to construct models at the regional scale that contain the essential elements of the more-detailed point models. The paper describes the progress to date in describing these models, and how they have been integrated into a coordinated agricultural crop production evaluation system.