Kinetic modelling of the pyrolysis of Miscanthus × Giganteus from the thermogravimetric analysis of its fractionated components

In this paper the thermal behaviour of Miscanthus × Giganteus (M×G) is studied by thermogravimetric analysis. In order to characterise the thermal behaviour of its cellulose, hemicellulose and lignin, the raw M×G material was treated sequentially by water, H₂SO₄ and KOH. The global kinetic parameters for each component were determined by subsequent modelling of the TG data with the Ozawa-Flynn-Wall method and multivariate non-linear regression. It is found that the global pyrolysis of M×G can be satisfactorily described using a six steps-kinetic scheme. The analytical method proposed here can be probably extended without too many efforts to other biomass products. An erratum to this article can be found at     

Steam gasification of waste tyre: Influence of process temperature on yield and product composition

An experimental survey of waste tyre gasification with steam as oxidizing agent has been conducted in a continuous bench scale reactor, with the aim of studying the influence of the process temperature on the yield and the composition of the products; the tests have been performed at three different temperatures, in the range of 850–1000 °C, holding all the other operational parameters (pressure, carrier gas flow, solid residence time). The experimental results show that the process seems promising in view of obtaining a good quality syngas, indicating that a higher temperature results in a higher syngas production (86 wt%) and a lower char yield, due to an enhancement of the solid–gas phase reactions with the temperature. Higher temperatures clearly result in higher hydrogen concentrations: the hydrogen content rapidly increases, attaining values higher than 65% v/v, while methane and ethylene gradually decrease over the range of the temperatures; carbon monoxide and dioxide instead, after an initial increase, show a nearly constant concentration at 1000 °C. Furthermore, in regards to the elemental composition of the synthesis gas, as the temperature increases, the carbon content continuously decreases, while the oxygen content increases; the hydrogen, being the main component of the gas fraction and having a small atomic weight, is responsible for the progressive reduction of the gas density at higher temperature.     

Prenatal diagnosis of ventricular aneurysm: a report of two cases and a review

Ventricular aneurysms have rarely been reported prenatally. Their prognosis is variable depending on factors such as early detection, their relative size in comparison to the ventricular cavity, growth on follow-up, and signs of cardiac failure. In view of the fact that it may be useful to report on additional cases in order to make available further information on aetiology, prognosis and neonatal management, we hereby report on two cases of ventricular aneurysm with good mid-term prognosis. One case of apical aneurysm of the left ventricle was associated with a muscular ventricular septal defect, the features of which are compatible with a fetal myocardial infarction and ventricular septal rupture in absence of coronary artery anomalies as demonstrated by catheterisation. Another case of sub-tricuspidal aneurysm of the right ventricle associated with mitral prolapse appears to be a component of diffuse connective dysplasia. Despite the early gestational age at diagnosis, the large size of the aneurysm and the associated defect, both the infants were asymptomatic in infancy prompting a conservative management. Copyright © 2002 John Wiley & Sons, Ltd.     

Miscanthus × Giganteus straw and pellets as sustainable fuels

In this paper we present, for the first time, data on the combustion of Miscanthus × Giganteus straw and pellets. We found that the heating value of Miscanthus is 17.744 MJ/kg. The gaseous emission indices of SO₂, NO _x and total organic carbon (TOC) in the exhaust are reported and compared with the European standards for biomass boilers. On the basis of our results, it is possible to evaluate a net energy yield between 152 and 326 MJ/hectare/year for the cultivation of Miscanthus with an energy balance estimated to be in the range of 7.7–15.4. According to the presented results, it seems reasonable to consider Miscanthus as a promising candidate as alternative fuel.     

Sensitive Parameters In Predicting Exposure Contaminants Concentration In A Risk Assessment Process

A sensitivity analysis (SA) was conducted on the analytical models considered in the risk-based corrective-action (RBCA) methodology of risk analysis, as developed by the American Society for Testing of Materials (ASTM), to predict a contaminant‘s concentration in the affected medium at the point of human exposure. These models are of interest because evaluations regarding the best approach to contaminated site remediation are shifting toward increased use of risk-based decision, and the ASTM RBCA methodology represents the most effective and internationally widely used standardized guide for risk assessment process. This paper identifies key physical and chemical parameters that need additional precision and accuracy consideration in order to reduce uncertainty in models prediction, thereby saving time, money and engineering effort in the data collection process. SA was performed applying a variance-based method to organic contaminants migration models with reference to soil-to-groundwater leaching ingestion exposure scenario. Results indicate that model output strongly depends on the organic-carbon partition coefficient, organic-carbon content, net infiltration, Darcy velocity, source-receptor distance, and first-order decay constant.     

The distribution of phthalate esters in indoor dust of Palermo (Italy)

In this work, phthalic acid esters (PAEs): dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, and di-n-octyl phthalate in indoor dust (used as passive sampler) were investigated. The settled dust samples were collected from thirteen indoor environments from Palermo city. A fast and simple method using Soxhlet and GC–MS analysis has been optimized to identify and quantify the phthalates. Total phthalates concentrations in indoor dusts ranged from 269 to 4,831 mg/kg d.w. (d.w. = dry weight). The data show a linear correlation between total PAEs concentration and a single compound content, with the exclusion of the two most volatile components (DMP and DEP) that are present in appreciable amounts only in two samples. These results suggest that most of the PAEs identified in the samples of settled dust originate from the same type of material. This evidence indicates that, in a specific indoor environment, generally is not present only one compound but a mixture having over time comparable percentages of PAEs. Consequently, for routine analyses of a specific indoor environment, only a smaller number of compounds could be determined to value the contamination of that environment. We also note differences in phthalate concentrations between buildings from different construction periods; the total concentration of PAEs was higher in ancient homes compared to those constructed later. This is due to a trend to reduce or remove certain hazardous compounds from building materials and consumer goods. A linear correlation between total PAEs concentration and age of the building was observed (R = 0.71).     

Soil fertility,crop biodiversity,and farmers’ revenues: Evidence from Italy

Ambio - This paper analyzes the interplay between soil fertility, crop biodiversity, and farmers’ revenues. We use a large, original, farm-level panel dataset. Findings indicate that both...     

Characterisation of urban inhalation exposures to benzene,formaldehyde and acetaldehyde in the European Union

BACKGROUND, AIM AND SCOPE: All across Europe, people live and work in indoor environments. On average, people spend around 90% of their time indoors (homes, workplaces, cars and public transport means, etc.) and are exposed to a complex mixture of pollutants at concentration levels that are often several times higher than outdoors. These pollutants are emitted by different sources indoors and outdoors and include volatile organic compounds (VOCs), carbonyls (aldehydes and ketones) and other chemical substances often adsorbed on particles. Moreover, legal obligations opposed by legislations, such as the European Union's General Product Safety Directive (GPSD) and Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), increasingly require detailed understanding of where and how chemical substances are used throughout their life-cycle and require better characterisation of their emissions and exposure. This information is essential to be able to control emissions from sources aiming at a reduction of adverse health effects. Scientifically sound human risk assessment procedures based on qualitative and quantitative human exposure information allows a better characterisation of population exposures to chemical substances. In this context, the current paper compares inhalation exposures to three health-based EU priority substances, i.e. benzene, formaldehyde and acetaldehyde. MATERIALS AND METHODS: Distributions of urban population inhalation exposures, indoor and outdoor concentrations were created on the basis of measured AIRMEX data in 12 European cities and compared to results from existing European population exposure studies published within the scientific literature. By pooling all EU city personal exposure, indoor and outdoor concentration means, representative EU city cumulative frequency distributions were created. Population exposures were modelled with a microenvironment model using the time spent and concentrations in four microenvironments, i.e. indoors at home and at work, outdoors at work and in transit, as input parameters. Pooled EU city inhalation exposures were compared to modelled population exposures. The contributions of these microenvironments to the total daily inhalation exposure of formaldehyde, benzene and acetaldehyde were estimated. Inhalation exposures were compared to the EU annual ambient benzene air quality guideline (5 microg/m3-to be met by 2010) and the recommended (based on the INDEX project) 30-min average formaldehyde limit value (30 microg/m3). RESULTS: Indoor inhalation exposure contributions are much higher compared to the outdoor or in-transit microenvironment contributions, accounting for almost 99% in the case of formaldehyde. The highest in-transit exposure contribution was found for benzene; 29.4% of the total inhalation exposure contribution. Comparing the pooled AIRMEX EU city inhalation exposures with the modelled exposures, benzene, formaldehyde and acetaldehyde exposures are 5.1, 17.3 and 11.8 microg/m3 vs. 5.1, 20.1 and 10.2 microg/m3, respectively. Together with the fact that a dominating fraction of time is spent indoors (>90%), the total inhalation exposure is mostly driven by the time spent indoors. DISCUSSION: The approach used in this paper faced three challenges concerning exposure and time-activity data, comparability and scarce or missing in-transit data inducing careful interpretation of the results. The results obtained by AIRMEX underline that many European urban populations are still exposed to elevated levels of benzene and formaldehyde in the inhaled air. It is still likely that the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended formaldehyde 30-min average limit value of 30 microg/m3 are exceeded by a substantial part of populations living in urban areas. Considering multimedia and multi-pathway exposure to acetaldehyde, the biggest exposure contribution was found to be related to dietary behaviour rather than to inhalation. CONCLUSIONS: In the present study, inhalation exposures of urban populations were assessed on the basis of novel and existing exposure data. The indoor residential microenvironment contributed most to the total daily urban population inhalation exposure. The results presented in this paper suggest that a significant part of the populations living in European cities exceed the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended (INDEX project) formaldehyde 30-min average limit value of 30 microg/m3. RECOMMENDATIONS AND PERSPECTIVES: To reduce exposures and consequent health effects, adequate measures must be taken to diminish emissions from sources such as materials and products that especially emit benzene and formaldehyde in indoor air. In parallel, measures can be taken aiming at reducing the outdoor pollution contribution indoors. Besides emission reduction, mechanisms to effectively monitor and manage the indoor air quality should be established. These mechanisms could be developed by setting up appropriate EU indoor air guidelines.     

The contribution of the sciences,technology and innovation to sustainable development: the application of sustainability science from the perspective of UNESCO’s experience

The contribution of scientific knowledge and innovation to sustainability is demonstrated. Theory, discoveries, programmes and activities in both the natural as well as social sciences fields have greatly helped with the environmental, economic and social challenges of the past and current centuries, especially in the past 50 years or so. Nowadays, we increasingly realize the intimate link between science and society, and the need not only for science to inform policy but also to address requests by governments and the multiple stakeholders confronted with the challenge to achieve sustainable development. Current barriers to how science is conceived and related education is delivered hamper true interdisciplinarity, and the emerging field of sustainability science attempts inter alia to clarify how ‘a new generation of science’ can be designed so as to promote more integrated thinking to tackle complex societal issues. At the international level, and more specifically in the context of the United Nations, the practice of science has always entailed the need to solve problems such as climate change, ozone depletion, disaster risk, lack of food security, biodiversity loss, social instability and ineffective governance—to cite a few. In this regard, science in an intergovernmental context is by definition science that has to assist with the struggle for sustainability. Yet, a higher level of integration and cross-fertilization among disciplines as well as of participation among concerned stakeholders in the design and implementation of science-based programmes and activities carried out by the United Nations (and, in this article, the specific case of its Educational, Scientific and Cultural Organization—UNESCO—is presented) seems to be needed. The debate on sustainability science carried out in the academic circle and the experience of UNESCO in this area can be mutually supportive in further elucidating how, practically, the approach of sustainability science can enhance the achievement of sustainable development at multiple scales.     

Application of fuzzy logic and sensitivity analysis for soil contamination hazard classification

The present article is aimed at illustrating a methodology for a rapid and effective assessment of pollution hazard connected with the presence of uncontrolled landfills. In particular, by means of a fuzzy approach, the criterion adopted allowed a comparison of the results obtained from a cross analysis of some intrinsic characteristics of the single landfills and the territory where they are located. Their identification shows the most relevant environmental problem. Therefore, we have classified each site within a hazard scale enabling us to understand which one requires to be checked more urgently, to do instrumental surveys and, if needed, to do restoration and reclamation. Moreover, the sensitivity analysis we carried out allowed us to identify which is the best membership function belonging and which is the best defuzzification method. That is, in particular, the trapezoidal function and the centroid method. The proposed fuzzy approach, supported by the sensitivity analysis, has revealed to be an important tool for supporting decisions, in order to optimise technical and economic resources.